Developmental and Reproductive Effects of Iron Oxide Nanoparticles in Arabidopsis thaliana

Increasing use of iron oxide nanoparticles in medicine and environmental remediation has led to concerns regarding exposure of these nanoparticles to the public. However, limited studies are available to evaluate their effects on the environment, in particular on plants and food crops. Here, we investigated the effects of positive (PC) and negative (NC) charged iron oxide (Fe₂O₃) nanoparticles (IONPs) on the physiology and reproductive capacity of Arabidopsis thaliana at concentrations of 3 and 25 mg/L. The 3 mg/L treated plants did not show evident effects on seeding and root length. However, the 25 mg/L treatment resulted in reduced seedling (positive-20% and negative-3.6%) and root (positive-48% and negative-negligible) length. Interestingly, treatment with polyethylenimine (PEI; IONP-PC coating) also resulted in reduced root length (39%) but no change was observed with polyacrylic acid (PAA; IONP-NC coating) treatment alone. However, treatment with IONPs at 3 mg/L did lead to an almost 5% increase in aborted pollen, a 2%–6% reduction in pollen viability and up to an 11% reduction in seed yield depending on the number of treatments. Interestingly, the treated plants did not show any observable phenotypic changes in overall size or general plant structure, indicating that environmental nanoparticle contamination could go dangerously unnoticed.     

Operating Penalties in Single-Fiber Operation 10-Gb/s, 1024-Way Split, 110-km Long-Reach Optical Access Networks

We report for the first time optical signal-to-noise penalties which lead to performance degradations in single-fiber long-reach optical access networks when compared to identical dual-fiber systems. A simplified architecture, with reduced optical amplifier count compared to previous work, for single-fiber operation of a symmetrical 10-Gb/s, 1024-way split, 110-km long-reach optical access network is presented and demonstrated. In addition, a possible solution to remove the optical signal-to-noise penalty is suggested     

Search for high-performance probe-fed stacked patches using optimization

High-performance circular probe-fed stacked patch antenna designs are explored through the use of numerical optimization. New trends are sought to aid understanding and to suggest novel solutions. We describe the optimization technique, present a new design trend relating efficiency and bandwidth to the choice of substrate dielectric, and propose and demonstrate a novel, optimized antenna achieving 33% bandwidth whilst maintaining greater than 80% surface wave efficiency.     

Frequency of molecular alterations in heterozygous beta-thalassemia in southern Spain and their relation to the hematologic phenotype

INTRODUCTION: Heterozygous beta-thalassemia manifests hematologically with microcytosis, reduced red blood cell hemoglobin concentration and high hemoglobin A2 levels. Almost all molecular alterations are due to point mutations. We attempt to determinate the frequency of that mutations in the Oriental Andalusia Area, and its relationship with the hematological phenotype. PATIENTS AND METHODS: We have studied 45 heterozygous patients. DNA samples were amplified by PCR, using the printers CD7 and HI1. A 16 Kb fragment corresponding to beta globin gene was obtained and analyzed by Dot Blot assay and hybridized with allelic specific oligonucleotide (ASO) probes to detect the 6 more frequent mutations found in the South of Spain. RESULTS: Codon 39 nonsense mutation (31.1%) was the most frequent finding followed by IVS-1 NT 110 (26.7%). The relationship between hematological parameters and molecular mutations concluded that IVS-I NT 6 mutation developed a minimal anemia. DISCUSSION: From the practical point of view, this study indicates that we were able to detect more than 90% of heterozygous beta-tal. with 5 out of 6 ASO probes used in this work. Thus, our data also provides a further implication in prenatal diagnosis.     

Effects of clozapine and haloperidol on baseline levels of vacuous jaw movements in aged rats

BACKGROUND: IgE-mediated hypersensitivity to latex proteins has become a significant clinical problem over the last decade. Nursing and medical staff are at risk because of their occupational exposure to latex. AIMS: To determine the prevalence of type I hypersensitivity to latex allergens in the nursing staff of an Australian hospital. METHODS: A questionnaire which asked about symptoms associated with the use of latex gloves was completed by 140 nurses working in the Alfred Hospital (72 in general medical wards, 68 in intensive care units). Skin prick tests with eluates of five different types of latex glove as well as common aeroallergens (rye pollen and house dust mite) and banana extract were performed. RESULTS: Thirty-one nurses (22%) were skin prick test positive to at least one of the five latex glove eluates. All of these nurses were atopic, having positive skin prick tests to rye pollen or house dust mite. Symptoms of local dryness, itch and erythema associated with glove use were reported by more than half the study group, but not more frequently by those who were skin prick test positive to latex. Urticaria associated with glove use was reported more frequently by those with positive latex skin prick tests (13% vs 4%, p = 0.05). Eighty-seven per cent of the nurses who were latex skin test positive were also positive to banana extract. CONCLUSIONS: IgE-mediated hypersensitivity to latex is common in nurses working in an Australian hospital. Glove associated symptoms were frequently reported, but in most cases the symptoms were more typical of irritant or contact dermatitis rather than type I hypersensitivity reactions. However, the extent of subclinical sensitisation to latex found in this study suggests that symptomatic latex allergy is likely to emerge as an increasing problem for nursing staff in this country.     

An extensively modified version of MolScript that includes greatly enhanced coloring capabilities

Owing to its flexibility, MolScript has become one of the most widely used programs for generating publication-quality molecular graphics. Integration with the Raster3D package, to allow the production of photorealistic rendered images, has increased its popularity still further. However, this intensive use has shown the need for enhancement of some areas of the program, especially for controlling the coloring of atoms, bonds, and molecules. This work describes a heavily modified version of MolScript that has added syntax for describing complicated coloring schemes and also has new graphics commands. Enhancements include drawing split-bond ball-and-stick models, smoothly varying the color of molecules (color ramping), abrupt color changes within secondary structural units, and the creation of dashed bonds. Making use of these added features is simple because all MolScript syntax is still supported and one typically needs only to add a few control commands. The final section of this article suggests some uses for this modified MolScript and provides illustrative examples.     

Magnet Safety Assessment for ITER

The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.     

Pediatrics. A potpourri of clinical pearls

A pediatric focus in the emergency department requires an understanding of age-specific parameters of assessment and management. Differential considerations are unique in the pediatric patient reflecting both congenital and acquired conditions. Respiratory problems, meningitis, seizures, and child abuse require careful assessment and aggressive intervention. When approaching the ill child, attention must be directed toward reducing anxiety and pain in the patient.