Compound formation in the mercury-cadmium-tellurium-oxygen system

We report on compound formation in the system HgCdTeO. Samples were prepared by solid state reaction of mixtures of the binary oxide components. Specific phases were identified and characterized by X-ray and microprobe techniques. For some of these compounds small single crystals could be prepared and structural data of which are reported. Three groups of phases could be distinguished, most of them being of low symmetry, with Te in +4, +6, and in mixed oxidation states. The monotellurites HgTeO₃ and CdTeO₃ are structurally different and exhibit a large miscibility gap, whereas for the di-tellurites complete solid solution between CdTe₂O₅ and HgTe₂O₅ was found. As to the tellurates, phases with the compositions MTeO₄ and M₃Te₂O₉ (M = Hg, Cd) have been prepared. The Cd₃Te₂O₉-structure is stabilized by 30 mole% Hg. Another tellurate, monoclinic Hg₂TeO₄, was found to be isomorphous to the respective selenate and sulfate and is identical with the mineral magnolite. The interaction of Te₂O₅ with the metal oxides led to the formation of mixed valence compounds with both Te(+4) and Te(+6) of the types M₂Te₂O₇ and MTe₂O₆.     

Investigation of the Possibility of Using UNK Superconducting Dipole Magnets for Producing Rapid-Cycling Magnetic Fields

The superconducting dipoles developed as part of the UNK project have reached a magnetic field 6 T at a rate of up to 0.8 T/sec. Experimental data are presented on the conditioning, rate dependences, and dynamic losses for magnets with two types of superconducting cable (zebra and oxide). Possible ways to decrease the heat release in a dipole operating in rapid-cycling magnetic fields are examined. The results of an analysis of heat release and temperature conditions are presented for a dipole with a winding made of improved current-carrying components.     

Postural and symptomatic improvement after physiotherapy in patients with dizziness of suspected cervical origin

OBJECTIVE: To assess postural performance in patients with dizziness of suspected cervical origin in whom extracervical causes had been excluded, and to assess the effects of physiotherapy on postural performance and subjective complaints of neck pain and dizziness. DESIGN: Prospective, randomized, controlled trial. SETTING: Primary care centers and a tertiary referral center. PATIENTS AND SUBJECTS: Of 65 referrals, 43 patients were excluded because extracervical etiology was suspected. Of the remaining 22 patients, 17 completed the study (15 women, 2 men, x age 37 yr, range 26-49). The controls were 17 healthy subjects (15 women, 2 men, x age 36 yr, range 25-55). INTERVENTION: Physiotherapy based on analysis of symptoms and findings, and aimed to reduce cervical discomfort. Patients were randomized either to receive immediate physiotherapy (n = 9), or to wait 2 months, undergo repeat measurements, and then receive physiotherapy (n = 8). MAIN OUTCOME MEASURES: Posturography, measuring velocity and variance of vibration-induced body sway and variance of galvanically induced body sway. Subjective intensity of neck pain (Visual Analog Scale ratings, 0-100), intensity and frequency of dizziness (subjective score 0-4). RESULTS: The patients manifested significantly poorer postural performance than did healthy subjects (.05 > p > .0001). Physiotherapy significantly reduced neck pain and intensity and the frequency of dizziness (p < .01), and significantly improved postural performance (.05 > p > .0007). CONCLUSIONS: Patients with dizziness of suspected cervical origin are characterized by impaired postural performance. Physiotherapy reduces neck pain and dizziness and improves postural performance. Neck disorders should be considered when assessing patients complaining of dizziness, but alternative diagnoses are common.     

Simultaneous hydrolysis and fermentation of pulp mill primary clarifier sludge

Bioconversion of sludge from the primary clarifier of a sulphite pulping operation to ethanol offers a number of advantages over conventional disposal options. The amount of material which must be disposed of is reduced while, at the same time, salable and environmentally friendly fuel-ethanol is produced. In this study, primary clarifier sludge (PCS) was shown to be hydrolysed to produce fermentable sugars at a rate proportional to enzyme loading. Initial (1 hour) hydrolysis rates as high as 12.6 g reducing sugar/L · h were observed at an initial enzyme loading of 10 filter paper units (FPU)/g. Hydrolysis was inhibited by spent sulphite liquor (SSL), an inhibition which could be completely overcome by fermenting the SSL to remove sugars. Surfactants were found to only marginally improve the production of sugars. To reduce the deleterious effects of end product inhibition, single stage simultaneous hydrolysis and fermentation (SHF) was carried out using cellulase enzymes and Saccharomyces cerevisiae.     

Computerized cyclic voltammetric detection after HPLC of the antineoplastic agents etoposide,teniposide, adriamycin and its metabolite adriamycinol in urine samples

A computerized electrochemical detection system for application after HPLC, provided with a cyclic voltammetric oxidative and reductive module, is described for the on-line qualitative determination of electroactive antineoplastic agents and metabolites in urine samples, collected from cancer patients, following intravenous administration.The application of two cyclic voltammetric detection modes provides an insight into both oxidative and reductive electrode reactions of compounds, passing the detector and the occurrence of (it)reversible chemical and electrochemical processes at the electrode surface. In this way, redox properties of drugs and metabolites characteristic of their molecular structure, can be established, which may provide information related to their (enzymatic) bioactivation.In the cyclic voltammetric mode, the system permits automatic detection of a compound in the cell, recording, storage and plotting of voltammograms and calculation of the retention times, the half-wave potentials and the peak potentials of each scan of all individual compounds. For routine use, storage of 68 voltammograms on-line is sufficient for the analysis of biological samples in clinical-pharmacological research. Special attention has been paid to automatic, multi-reference-point component detection.Based on their concentrations in urine, the oxidative cyclic voltammetric mode, using a glassy carbon electrode, permits the determination of etoposide and teniposide, whereas the reductive cyclic voltammetric mode, with a static mercury drop electrode, permits the determination of adriamycin and its metabolite adriamycinol.     

Optimal operation of distillation processes under uncertain inflows accumulated in a feed tank

A new method of optimizing the operation of distillation processes with uncertain inflow streams from upstream plants is discussed. The case considered is the streams that will be first accumulated in a tank before feeding to the column. To minimize the total amount of operating energy while keeping a stable column operation under these inflows, a novel decomposed optimization strategy consisting of two steps was used. For an optimal planning of the dynamic operation, a smooth feed flow policy to the column is developed in the first step by stochastic optimization under chance constraints by ensuring a predefined probability of holding the tank level inside the desired range. An easy-to-use method developed computes the maximum reachable probability of holding the constraints so that a feasible solution of the chance constrained problem can be guaranteed. Since the uncertainty in the inflow stream variability is absorbed in the stochastic optimization over the tank, the operation of the dowstream distillation column is deterministic. Therefore, in the second step, the reflux and reboiler duty policies of the column are developed by deterministic dynamic optimization. The optimal overall strategy is obtained by the maximized smoothness of the feed flow to the distillation column. The approach is applied to a pilot column, and the developed operating policies are implemented on the real plant by experiment.     

Analyzing settings for social identity management on Social Networking Sites: Classification,current state,and proposed developments

The rising prevalence of Social Networking Sites (SNS) and their usage in multiple contexts poses new privacy challenges and increasingly prompts users to manage their online identity. To address privacy threats stemming from interacting with other users on SNS, effective Social Identity Management (SIdM) is a key requirement. It refers to the deliberate and targeted disclosure of personal attribute values to a subset of one's contacts or other users on the SNS. Protection against other entities such as the site operator itself or advertisers and application programmers is not covered by SIdM, but could be incorporated in further refinement steps. Features and settings to perform SIdM have been proposed and subsequently implemented partly by some SNS. Yet, these are often isolated solutions that lack integration into a reference framework that states the requirements for successfully managing one's identity. In this article, such a reference framework of existing and desired SIdM settings is derived from identity theory, literature analysis, and existing SNS. Based thereupon, we examine the SIdM capabilities of prevalent SNS and highlight possible improvements. Lastly, we reason about developing a metric to objectively compare the capability of SNS in regards to their support for SIdM.     

Homopolymer Nanolithography

Future progress in nanoscience and nanotechnology necessitates further development of versatile, labor‐, and cost‐efficient surface patterning strategies. A new approach to nanopatterning is reported, which utilizes surface segregation of a smooth layer of an end‐grafted homopolymer in a poor solvent. The variation in polymer grafting density yields a range of surface nanostructures, including randomly organized pinned spherical micelles, worm‐like structures, networks, and porous films. The capability to use the polymer patterns for site‐specific deposition of small molecules, polymers, or nanoparticles is shown. This versatile strategy enables patterning of curved surfaces with direct access to the substrate and no need in changing polymer composition to realize different surface patterns.