Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Infiltration and Top Seed Growth-Textured YBCO Bulks With Multiple Holes

The recently reported hole-patterned YBa₂Cu₃O _y (Y123) bulks with improved superconducting properties are highly interesting from material quality and application variety points of view. It is well known that the core of plain bulk superconductors needs to be fully oxygenated and some defects like cracks, pores, and voids must be suppressed in order that the material can trap a high magnetic field or carry a high current density. To minimize the above defects, we have used a combination of standard superconducting ceramic processing and an infiltration technique to prepare regularly perforated YBa₂Cu₃O _y (Y123) bulk superconductors. This process leads to negligible shrinkage upon annealing and a uniform distribution of Y211 inclusions. Texture was evidenced by neutron pole figure measurements. Flux mapping was used to verify the superconducting homogeneity of the samples and to investigate the field-trapping ability. In addition, the textured drilled samples were reinforced using resin or metal impregnation and the influence of the different processing steps on the hardness of the materials has been investigated.     

HColonies: a new hybrid metaheuristic for medical data classification

Medical data feature a number of characteristics that make their classification a complex task. Yet, the societal significance of the subject and the computational challenge it presents has caused the classification of medical datasets to be a popular research area. A new hybrid metaheuristic is presented for the classification task of medical datasets. The hybrid ant–bee colonies (HColonies) consists of two phases: an ant colony optimization (ACO) phase and an artificial bee colony (ABC) phase. The food sources of ABC are initialized into decision lists, constructed during the ACO phase using different subsets of the training data. The task of the ABC is to optimize the obtained decision lists. New variants of the ABC operators are proposed to suit the classification task. Results on a number of benchmark, real-world medical datasets show the usefulness of the proposed approach. Classification models obtained feature good predictive accuracy and relatively small model size.     

Circle-criterion Based Nonlinear Observer Design for Sensorless Induction Motor Control

This paper deals with the design of a nonlinear observer for sensorless induction motor control. Based upon the circle criterion approach, a nonlinear observer is designed to estimate pertinent but unmeasurable state variables of the considered induction machine for sensorless control purpose. The observer gain matrices are computed as a solution of linear matrix inequalities(LMI) that ensure the stability conditions of the state observer error dynamics in the sense of Lyapunov concepts. Measured and estimated state variables can be exploited to perform a state feedback control of the machine system. The simulation results are presented to illustrate the effectiveness of the proposed approach for nonlinear observer design.     

Einfluss der Wechselwirkung von Reaktion und Fluiddynamik auf das Verhalten von Strahlschlaufenreaktoren

Jet loop reactors are used as apparatus to facilitate chemical or biological reactions. This type of apparatus is characterized by an internal circulation flow, essentially driven by the injection of liquid. The nozzle can also be used to inject and disperse gas. The internal fluid dynamics and thus the reactor behavior is significantly determined by the introduced momentum and by the internal gas distribution. To describe the mutual influence of a gas-consuming reaction and the internal fluid dynamics, a simplified model based on a momentum balance and a material balance was used. From the exemplary calculations, a critical range for non-selective reactions and for fluid dynamic stability is given.     

On the generation of test patterns for multiple faults

This article presents a new method to generate test patterns for multiple stuck-at faults in combinational circuits. We assume the presence of all multiple faults of all multiplicities and we do not resort to their explicit enumeration: the target fault is a single component of possibly several multiple faults. New line and gate models are introduced to handle multiple fault effect propagation through the circuits. The method tries to generate test conditions that propagate the effect of the target fault to primary outputs. When these conditions are fulfilled, the input vector is a test for the target fault and it is guaranteed that all multiple faults of all multiplicities containing the target fault as component are also detected. The method uses similar techniques to those in FAN and SOCRATES algorithms to guide the search part of the algorithm, and includes several new heuristics to enhance the performance and fault detection capability. Experiments performed on the ISCAS'85 benchmark circuits show that test sets for multiple faults can be generated with high fault coverage and a reasonable increase in cost over test generation for single stuck-at faults.     

A CAD tool for an array of differential oscillators coupled through a broadband network

A new expression of the equations describing the locked states of two oscillators coupled through a resistor is presented in this article. This theory has led to the elaboration of a CAD tool which provides, in a short simulation time, the frequency locking region of two coupled differential oscillators. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Influence of secondary source technologies and energy management strategies on Energy Storage System sizing for fuel cell electric vehicles

Fuel cell electric vehicles (FCEVs) have some limitation which make them less competitor to thermal ones and delay their commercialization. The most important problems as the range, the durability and the cost depend directly on the energy storage problematic issues. In this context, this work presents an optimal sizing methodology for an Energy Storage System (ESS) composed by a fuel cell and an assistant source to supply a lightweight vehicle with 700 km driving range. Firstly, a comparative study between single and hybrid source is carried out to show the benefits of hybridization according to the range in terms of weight, cost and fuel consumption. Moreover, in order to improve the hybrid source characteristics, three technologies of the secondary source are tested and evaluated to be chosen for hybridization with fuel cell system purposes. Furthermore, the influence of three Energy Management Strategies (EMSs) on ESS sizing is studied where an optimal strategy provides the most favorable dimensions of the hybrid system. Simulation results give us the best technology needed for hybridization and allow us adopting the optimal management strategy to design the hybrid source. Finally, in order to show the influence of the driving cycles on the ESS design, a comparison study using the New European Driving Cycle “NEDC” and the Assessment and Reliability of Transport Emission Models Inventory Systems (ARTEMIS) confirms that there is a slow influence of the driving cycle on the ESS sizes.