Conversion of acrylonitrile-based precursors to carbon fibres

The progress of stabilization of two compositions of acrylic fibres with various orientations has been followed by a variety of techniques. The thermooxidative treatments for stabilization have been carried out in a continuous process and also in a batch process under free shrinkage, constant length and constant tension conditions. The morphological model of acrylic fibres consists of an alternating sequence of laterally ordered and laterally disordered regions along the fibre direction. This structure is consistent with the observations based on small-angle X-ray scattering of copper- impregnated precursor fibres and thermomechanical response, thermal stress development, calorimetry, wide- and small-angle X-ray scattering and sonic modu-lus measured at different extents of stabilization. Lateral as well as orientational order in these fibres can be increased markedly through a high-temperature deformation process prior to stabilization. An increase in perfection and extent of order is observed in the early stages of stabilization. There is also a simultaneous decrease in the orientation of the disordered phase at this stage and the extent of this decrease depends on the axial constraints imposed on the fibre. Little difference in the rate of stabilization is observed as measured by density or oxygen uptake for fibres with different extents of orientation, lateral order or restraint. Fibres containing itaconic add, a stabilization catalyst did show an increased rate of stabilization. Inferences have been drawn regarding additional research pertaining to achieving high order in precursor fibres, minimizing orientational relaxation during oxidative stabilization, and the techniques for monitoring the extents of the stabilization treatment and the changes in relevant morphological parameters.     

Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material

A heterogeneous finite element model with randomly distributed inhomogeneities has been developed for the determination of the forming limit diagram (FLD) for thin aluminum sheet material based on the prediction of localized necking. The strength difference between the inhomogeneities and the matrix is ascertained either from the fluctuation of the experimental stress-strain curve or from a micromechanical analysis that uses a representative particle field. By changing the specimen geometry and friction conditions, different stress states (or strain paths) are achieved. A plot of the critical Oyane fracture parameter is used to identify the limit strain state. Also, a plot of equivalent plastic strain rate is used to distinguish the boundary of intense shear bands and hence to identify where to take the measurement point. Both a plane stress model and a three-dimensional (3-D) model are adopted to predict the shear banding phenomenon and hence the FLD. The predicted FLD agrees well with the measurements from a recent round robin experimental FLD involving several independent research laboratories. The Taguchi method is applied to assess how the various parameters involved in the heterogeneous model affect the calculated forming limit strain.     

Sybil Attack with RSU Detection and Location Privacy in Urban VANETs: An Efficient EPORP Technique

In recent years, Vehicular ad hoc networks (VANETs) could facilitate the decision-making progress of the drivers for example trip planning with the consideration of traffic. In the VANET, the Sybil attack is a very serious attack that collapses the security. In literature, some of the methods are reviewed to detect Sybil attacks in VANETs, but it fails to achieve Sybil attack detection. Hence, in this paper, Emperor Penguin Optimization-based Routing protocol (EPORP) is developed for detecting the Sybil attack which enhances the VANETs security. The main motive of the research is detecting the Sybil attack in VANETs for enhancing the secure operation. In the proposed approach, the Sybil attack will be detected with the help of the Rumour riding technique. To enhance the security of the VANETs, the Split XOR (SXOR) operation is utilized. In the SXOR operation, the optimal key is selected with the help of Emperor Penguin Optimization (EPO). The proposed method is implemented in the NS2 platform and performances are evaluated by metrics such as delay, throughput, delay, encryption time, and decryption time. The proposed method is compared with existing methods such as Whale Optimization Algorithm (WOA), Particle Swarm Optimization (PSO), and Firefly Algorithm (FA) respectively. While analyzing the delivery ratio, the proposed method has 0.96 s, and the WOA, PSO, and FA are 0.94, 0.92, and 0.90 respectively. From the analysis, the proposed method has a high delivery ratio value compared with the WOA, PSO, and FA methods. Similarly, the other parameters are analyzed and compared with the existing methods.

     

Formulation and development of ophthalmic in situ gel for the treatment ocular inflammation and infection using application of quality by design concept

Context: The conventional liquid ophthalmic delivery systems exhibit short pre-corneal residence time and the relative impermeability to the cornea which leads to poor ocular bioavailability.

Objective: The aim of this study was to apply quality by design (QbD) for development of dexamethasone sodium phosphate (DSP) and tobramycin sulfate (TS)-loaded thermoresponsive ophthalmic in situ gel containing Poloxamer 407 and hydroxyl propyl methyl cellulose (HPMC) K4M for prolonging the pre-corneal residence time, ocular bioavability and decreases the frequency of administration of dosage form. The material attributes and the critical quality attributes (CQA) of the in situ gel were identified. Central composite design (CCD) was adopted to optimize the formulation.

Materials and methods: The ophthalmic in situ forming gels were prepared by cold method. Materials attributes were the amount of Poloxamer 407 and HPMC and CQA identified were Gel strength, mucoadhesive index, gelation temperature and % of drug release of both drug.

Results and discussion: Optimized batch (F*) containing 16.75% poloxamer 407 and 0.54% HPMC K4M were exhibited all results in acceptable limits. Compared with the marketed formulation, optimized in situ gel showed delayed T_max, improved C_max and AUC in rabbit aqueous humor, suggesting the sustained drug release and better corneal penetration and absorption.

Conclusion: According to the study, it could be concluded that DSP and TS would be successfully formulated as in situ gelling mucoadhesive system for the treatment of steroid responsive eye infections with the properties of sustained drug release, prolonged ocular retention and improved corneal penetration.     

Attenuated total reflection fourier transform infrared spectroscopy towards disclosing mechanism of bacterial adhesion on thermally stabilized titanium nano-interfaces

Titanium is widely used as medical implant material and as condenser material in the nuclear industry where its integrity is questioned due to its susceptibility to bacterial adhesion. A systematic investigation on the influence of thermally (50–800 °C) stabilized titanium (TS-Ti) nano oxide towards bacterial adhesion was carried out. The results showed that below 350 °C significant bacterio-phobicity was observed, while above 500 °C significant affinity towards bacterial cells was recorded. Conventional characterization tools such as HR-TEM and XRD did not provide much insight on the changes occurring on the oxide film with heat treatment, however, attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR) of the surface showed significant changes in the spectral pattern as a function of increasing heat treatment. It was observed that elevated OH, N–H and C=O groups and rutile titania on the TS-Ti oxide films led to higher affinity for bacterial adhesion. On the other hand low temperature TS-Ti nanooxide films (<350 °C) showed high C–H groups and decreased OH groups on their surface, which possibly contributed towards their bacterio-phobicity. The TS-Ti nanooxide film grown at 50 °C was observed to be the most efficient anti-bacterial adhesion interface, while the 800 °C interface was the one showing highest affinity towards bacterial adhesion. This study confirms the successful application of ATR-FTIR technique for nano-oxide film characterization and towards understanding the variations in bacterial interaction of such nano interfaces.     

A hybrid approach to asset allocation with simultaneous consideration of suitability and optimality

In this paper, we develop mathematical models for simultaneous consideration of suitability and optimality in asset allocation. We use a hybrid approach that combines behavior survey, cluster analysis, analytical hierarchy process and fuzzy mathematical programming.     

Maintaining Views in Object-Relational Databases

View materialization is an important way of improving the performance of query processing. When an update occurs to the source data from which a materialized view is derived, the materialized view has to be updated so that it is consistent with the source data. This update process is called view maintenance. The incremental method of view maintenance, which computes the new view using the old view and the update to the source data, is widely preferred to full view recomputation when the update is small in size. In this paper we investigate how to incrementally maintain views in object-relational (OR) databases. The investigation focuses on maintaining views defined in OR-SQL, a language containing the features of object referencing, inheritance, collection, and aggregate functions including user-defined set aggregate functions. We propose an architecture and algorithms for incremental OR viewmaintenance. We implement all algorithms and analyze the performance of them in comparison with full view recomputation. The analysis shows that the algorithms significantly reduce the cost of updating a vieww hen the size of an update to the source data is relatively small. Received 23 May 2000 / Revised 27 March 2001 / Accepted in revised form 30 April 2001 Correspondence and offprint requests to: Jixue Liu, School of Computer and Information Science, University of South Australia, Mawson Lakes, Adelaide SA5084, Australia. Email: jixue.liu@unisa.edu.auau     

2021年混合云科技将如何发展?

很少有企业能预料到2020年出现的巨大变化.2020年出现的新冠肺炎疫情打乱了整个世界的节奏,迫使企业迅速调整其技术基础设施,让员工能远程开展工作的同时做好更长远的规划,以应对前所未有的不确定性.对很多企业而言,重新改造IT基础设施是其生存下去的关键.     

Viscous Potential Flow Analysis of Kelvin–Helmholtz Instability of a Cylindrical Flow with Heat and Mass Transfer

A linear analysis of Kelvin–Helmholtz instability of a cylindrical interface has been carried out when there is heat and mass transfer across the interface, using viscous potential flow theory. Both fluids are considered as incompressible, viscous, and thermally conducting with different kinematic viscosities. Both axisymmetric as well as asymmetric disturbances are considered. Stability criterion is given by a critical value of relative velocity and stability is discussed theoretically as well as numerically. Various graphs with respect to physical parameters such as wave number, viscosity ratio, heat transfer coefficients, Reynolds number, etc., have been drawn and the effect of various parameters have been described. A comparison with the linear stability analysis of inviscid fluids (Lee [10]) has been made and it is observed that viscosity has a stabilizing effect on the stability of the system. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res, 43(6): 489–503, 2014; Published online 3 October 2013 in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21092