A comparative study of DPSK and OOK WDM transmission over transoceanic distances and their performance degradations due to nonlinear phase noise

We have compared experimentally the transmission performance of return-to-zero differential phase-shift keying (RZ-DPSK) with RZ-ON-OFF keying (OOK), nonreturn-to-zero differential phase-shift keying (NRZ-DPSK), and NRZ-OOK for 100/spl times/10-Gb/s transmission with a spectral efficiency of 0.22 b/s/Hz over transoceanic distances. The Q degradation of the RZ-DPSK after transmission over 9180 km was 3 dB greater than that of RZ-OOK. The experimental results clearly showed the major cause of degradation for DPSK is not cross-phase modulation but self-phase modulation. The calculated nonlinear phase noise, i.e., the Gordon-Mollenauer effect, agreed with the experimental results. A distributed-Raman-amplifier assisted erbium-doped-fiber-amplified transmission line acted well in reducing the nonlinear phase noise.     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

A synthetic polymer with a laminin-apatite composite layer on its surface would be useful as a percutaneous device. The preparation of such a composite was attempted in the present study using poly（ ethylene terephthalate ） （PET） and polyethylene （PE） as the synthetic polymer. PET and PE plates and those pretreated with an oxygen plasma were alternately dipped in calcium and phosphate ion solutions, and then immersed in a metastable calcium phosphate solution supplemented with laminin （ LCP solution ）. The PET and PE plates pretreated with an oxygen plasma formed a uniform and continuous layer of a laminin-apatite composite on their surfaces. In contrast, the PET and PE plates that had not been pretreated with an oxygen plasma did not form a continuous layer of a laminin-apatite composite on their surfaces. The hydrophilic functional groups on the PET and PE surfaces introduced by the plasma treatment were responsible for the successful laminin-apatite coruposite coating.     

The relationship of IL-6 to hormonal mediators, fuel utilization, and systemic hypermetabolism after surgical trauma

OBJECTIVES: To define the relationship between inflammatory cytokines, hormonal mediators, alteration of energy substrate and hypermetabolism during the early phase after surgical trauma. DESIGN: A prospective case-control study of 13 patients underwent elective surgery for carcinoma between November 1993 and January 1995. MATERIALS AND METHODS: They received parenteral supply of adequate glucose and amino acids through central venous catheter after surgery equally. Inflammatory cytokines such as TNF- alpha, IL-1 and IL-6, stress hormones such as norepinephrine, glucagon and insulin, and fuel utilization and hypermetabolism variables such as resting energy expenditure (REE), CRP, free fatty acid, respiratory quotient, the calculated rates of glucose and fat oxidation using indirect calorimetry were measured serially (the day before operation, the end of surgery, and postoperative day (POD) 1, 2 and 5). MEASUREMENTS AND MAIN RESULTS: TNF- alpha and IL-1 were not detected during the study period. Initial elevation and steady decline of IL-6 concentrations were seen after surgical injury, and this response related significantly to post-operative norepinephrine and glucagon levels throughout the study period, and to insulin levels only at the end of surgery. %REE (REE/BEEHB; basal energy expenditure according to the Harris-Benedict equation) on POD 2 and 5, and all CRP levels after surgery were significantly related to IL-6 levels more than hormone levels. Fuel utilization variables on POD 2 were related to both IL-6 and hormone levels. CONCLUSIONS: Initial elevation of IL-6 concentration might induce stress hormones such as norepinephrine and glucagon, but not insulin after surgical trauma. Moreover not only hormonal mediators but also cytokine such as IL-6 are responsible for the development of the stress response of the alteration of energy substrate and hypermetabolism.     

Dynamic properties of an all solid-state frequency-shifted feedbacklaser

Frequency-shifted feedback (FSF) laser exhibits outstanding features in its oscillation spectrum. We analyze build-up dynamic properties of the FSF laser by means of rate equation and analyze steady-state dynamic properties of the FSF laser by means of Wigner-Ville distribution of intracavity electric field. Furthermore, we analyze instantaneous oscillation frequency at peak spectral intensity and oscillation bandwidth of its spectrum using the formula of instantaneous spectral intensity derived from Wigner-Ville distribution of intracavity electric field. These analytical results are in good agreement with the experimental ones which have been observed by a diode-pumped Nd:YVO₄ FSF laser. It becomes clear that the FSF laser supports many frequency components simultaneously even though the gain medium is homogeneously broadened and has a continuously chirped frequency components of comb in which the creation of chirped frequency components are strongly correlated in phase because of a replica of the preceding components. Also, the instantaneous oscillation frequency is closely related to the detuning frequency which depends on the total net gain in the cavity and the gain bandwidth of atomic transition. The oscillation bandwidth is defined as the product of the saturation-broadened bandwidth and the total resonant modes contributing to FSF operation     

Polarization-controlled single-mode VCSEL

Relative intensity noise (RIN) in a vertical-cavity surface-emitting laser (VCSEL) was greatly reduced through the use of polarization control to eliminate competition between two orthogonal polarization states by ensuring there was only one polarization state. Polarization was stable with optical feedback of up to 10%. Polarization control was achieved by inducing a small loss anisotropy in fundamental transversal mode VCSEL's. Anisotropic post structures, such as a rectangular post, an oblique post, or a zigzag-sidewall post, were found to be effective in creating loss anisotropy without serious degradation of other VCSEL characteristics such as light-output power or beam profile     

Identification of osteopontin in human dental calculus matrix

Osteopontin is a prominent non-collagenous component of bone matrix, although it is expressed in several other tissues. Recently, osteopontin was reported to be involved in urinary stone formation and atherosclerotic lesions of the aorta, suggesting that it may be a key protein associated with these types of pathological mineralization. In this study, whether or not human dental calculus contains osteopontin was investigated by immunoblotting and immunohistochemical analyses. After extraction of calculus proteins with EDTA and separation of the proteins by electrophoresis, immunoblotting analysis revealed the presence of osteopontin. Two forms of osteopontin appeared at 61 and 68 kDa on 10% polyacrylamide gel and the proteins were digested with thrombin, a highly specific protease. Moreover, immunohistochemical analysis revealed that osteopontin was localized in dental calculus adherent to tooth roots. These findings indicate that osteopontin is, in fact, present in human dental calculus and may be involved in calculus formation as the stone matrix.     

Estimation of the surface velocity of debris flow with computer-based spatial filtering

A computer-based spatial-filtering velocimeter to measure the surface velocity of natural debris flow is described. This is a simple and interesting technique implemented with a spatial filter constructed as a software program that processes the video image of debris flow instead of a hardware implementation. The surface velocity of the debris flow at the Mt. Yakedake Volcano, Japan, was estimated by this computer-based spatial-filtering method, and the results were compared with those obtained by a hardware-based spatial-filtering method. Computer-based spatial filtering has the important advantage of a capability for tuning the spatial-filter parameters to the target flow.     

Oxygen permeation properties and surface modification of acceptor-doped CeO2/MnFe2O4 composites

The preparation and oxygen permeation properties of the (Ce_0.8Pr_0.2)O_2−δ − x vol% MnFe₂O₄ composites, where x = 0 to 35, have been investigated. The samples were prepared by the Pechini method. In the case of Ce_0.8Pr_0.2O_2−δ, an oxygen flux density of 6 μmol⋅cm⁻²⋅s⁻¹ (L = 0.0247 cm) and the maximum methane conversion of 50% were attained at 1000^∘C. Unlike composites consisting of Gd-doped CeO₂ and MnFe₂O₄, the oxygen permeability of the (Ce_0.8Pr_0.2)O_2−δ – x vol% MnFe₂O₄ composites was almost constant regardless of the volume fraction of MnFe₂O₄; however, the optimum volume fraction of MnFe₂O₄ was determined to be 5 to 25 in the context of the chemical and mechanical stabilities under methane conversion atmosphere. In addition, the surface modification of the (Ce_0.8Gd_0.2)O_2−δ – 15 vol% MnFe₂O₄ composite was performed by using the FePt nanoparticles. The catalyst loading of 2.8 mg/cm² on the both side of the 0.3 mm-thick (Ce_0.8Gd_0.2)O_2−δ – 15vol% MnFe₂O₄ composite increased the oxygen flux density from 0.30 to 0.76 μmol⋅cm⁻²⋅s⁻¹ in the case of He/air gradients; however, the effect seems to be reduced in the case of high oxygen flux density caused by a large pO₂ gradient. Moreover, the Langmuir-Blodgett film of the FePt nanoparticles were successfully prepared on the tape-cast (Ce_0.8Gd_0.2)O_2−δ – 15vol% MnFe₂O₄ composite. Hydrophobic treatments for the surface of the composite were crucial to achieve high transfer ratio for the deposition of the LB film.     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

1Introduction Themostimportantrequirementofapercutaneous deviceisthepreventionofbacterialinfectionthroughtheinterfacebetweenthematerialandtheskin.Therefore,a percutaneousdevicehastoadherefirmlytoskintissueandpreventepidermaldowngrowth.Previously,Aokietalp…     

Static Coarse Grain Task Scheduling with Cache Optimization Using OpenMP

Effective use of cache memory is getting more important with increasing gap between the processor speed and memory access speed. Also, use of multigrain parallelism is getting more important to improve effective performance beyond the limitation of loop iteration level parallelism. Considering these factors, this paper proposes a coarse grain task static scheduling scheme considering cache optimization. The proposed scheme schedules coarse grain tasks to threads so that shared data among coarse grain tasks can be passed via cache after task and data decomposition considering cache size at compile time. It is implemented on OSCAR Fortran multigrain parallelizing compiler and evaluated on Sun Ultra80 four-processor SMP workstation using Swim and Tomcatv from the SPEC fp 95. As the results, the proposed scheme gives us 4.56 times speedup for Swim and 2.37 times on 4 processors for Tomcatv respectively against the Sun Forte HPC Ver. 6 update 1 loop parallelizing compiler.