Metal-insulator-semiconductor solar cell under gamma irradiation

The performance of a home made MIS–p-Si solar cell was experimentally studied under various gamma irradiation doses (up to 500 Mrad). The effect of radiation dose on the I−V and C−V characteristics was investigated in this work. The obtained results showed that all the output parameters of the cells under investigation were degraded with gamma radiation exposure. In addition, the effects of fabrication conditions (metal thickness and adding of antireflection coating) on the cell output parameters were also investigated.     

On the accurate determination of thermal diffusivity of liquids by using the photopyroelectric thickness scanning method

An enhanced accurate method of measuring the thermal diffusivity of liquids by the sample's thickness scan of the phase of the photopyroelectric signal is presented. The method, making use of the absolute values of the phase and sample thickness, leads to very accurate results for the room temperature values of thermal diffusivity (about +/-0.3%). The high accuracy of the method is due to a very precise control of the sample's thickness variation (0.1 microm step), to a proper localization of the thickness scan range, and to a new procedure of data analysis. The high accuracy of the method recommends it for the study of processes associated with small changes of the thermal parameters.     

Direct Analysis of Mitochondrial Damage Caused by Misfolded/Destabilized Proteins

Protein quality control is essential for cellular homeostasis. In this study, we examined the effect of improperly folded proteins that do not form amyloid fibrils on mitochondria, which play important roles in ATP production and cell death. First, we prepared domain 3 of the dengue envelope protein in wild type and four mutants with widely different biophysical properties in misfolded/aggregated or destabilized states. The effects of the different proteins were detected using fluorescence microscopy and Western blotting, which revealed that three of the five proteins disrupted both inner and outer membrane integrity, while the other two proteins, including the wild type, did not. Next, we examined the common characteristics of the proteins that displayed toxicity against mitochondria by measuring oligomer size, molten globule-like properties, and thermal stability. The common feature of all three toxic proteins was thermal instability. Therefore, our data strongly suggest that thermally unstable proteins generated in the cytosol can cause cellular damage by coming into direct contact with mitochondria. More importantly, we revealed that this damage is not amyloid-specific.     

Angiotensin I-converting enzyme (ACE) inhibitory activities of sardinelle (Sardinella aurita) by-products protein hydrolysates obtained by treatment with microbial and visceral fish serine proteases

The angiotensin I-converting enzyme (ACE) inhibitory activities of protein hydrolysates prepared from heads and viscera of sardinelle (Sardinella aurita) by treatment with various proteases were investigated. Protein hydrolysates were obtained by treatment with Alcalase^®, chymotrypsin, crude enzyme preparations from Bacillus licheniformis NH1 and Aspergillus clavatus ES1, and crude enzyme extract from sardine (Sardina pilchardus) viscera. All hydrolysates exhibited inhibitory activity towards ACE. The alkaline protease extract from the viscera of sardine produced hydrolysate with the highest ACE inhibitory activity (63.2 ± 1.5% at 2 mg/ml). Further, the degrees of hydrolysis and the inhibitory activities of ACE increased with increasing proteolysis time. The protein hydrolysate generated with alkaline proteases from the viscera of sardine was then fractionated by size exclusion chromatography on a Sephadex G-25 into eight major fractions (P₁–P₈). Biological functions of all fractions were assayed, and P₄ was found to display a high ACE inhibitory activity. The IC₅₀ values for ACE inhibitory activities of sardinelle by-products protein hydrolysates and fraction P₄ were 1.2 ± 0.09 and 0.81 ± 0.013 mg/ml, respectively. Further, P₄ showed resistance to in vitro digestion by gastrointestinal proteases. The amino acid analysis by GC/MS showed that P₄ was rich in phenylalanine, arginine, glycine, leucine, methionine, histidine and tyrosine. The added-value of sardinelle by-products may be improved by enzymatic treatment with visceral serine proteases from sardine.     

Management of excess energy in a photovoltaic/grid system by production of clean hydrogen

In this article, the authors design a new clean storage device for a photovoltaic system (PV) reinforced by the electrical grid. The photovoltaic system supplies power to a DC load. When the power of the photovoltaic source is insufficient, the electrical grid compensates the energy deficit. On the other hand, if the load is satisfied and the PV source is still able of supplying energy, the energy excess is diverted to an own storage unit materialized by an electrolysis which produces gaseous hydrogen by the process of electrolysis of water. The authors show that the quantity of hydrogen produced is proportional to the photovoltaic energy excess and also to the flow of water injected into the electrolysis. In this case, it is a question of designing an electrolysis with specific characteristics, which takes into account the quantity of energy excess and the flow of water injected into it. The authors abandon the idea of controlling the water flow by means of a pumping-electrovalve system, and initiate the idea of replacing the function of the pump by the action of gravity. The work focuses on the development of an electrolysis optimization approach using the water flow control in its alliance with the PV power excess which is also maximized. For an optimized use of the global system (load and electrolysis), the authors present an architecture based on energy-converting structures (DC/DC and AC/DC). In addition, to increase the reliability and safety of the system, the authors finish by developing a power management strategy (PMS) in the designed system. This power management strategy organizes the energy flow and selects the appropriate path of this flow between the two energy sources (PV and electrical grid) and the two possible energy receivers (load and electrolysis). A complete modeling of the system is developed in the Matlab/Simulink environment. The simulation results show that the hybrid system (PV and electrical grid) is able to permanently supplying the load and potentially storing the excess of the PV energy in the form of hydrogen gas.     

HVOF sprayed WC–Co coatings: Microstructure,mechanical properties and friction moment prediction

This study aims at gaining a better understanding of the microstructural features that control the mechanical and the tribological performances of WC–12 wt.% Co coatings under High Velocity Oxygen Fuel (HVOF) spraying conditions. This paper looks at the influences of the HVOF process parameters for WC–12Co material on the microstructural and the tribological behaviours of the coatings. The correlation between the coating microstructure and the wear behaviour is investigated by observing and analysing the microstructure and by studying the friction moment using enhanced statistical tool based on neural computations. According to the experimental and the numerical results, it has been shown that the spray parameters affect the phase composition, hardness and porosity of HVOF sprayed WC–12Co coatings and the correlations with HVOF process parameters are fully predictable in the steady-state regime.     

Effect of pressure on the structural and elastic properties of ZnS and MgS alloys in the B3 and B1 phases

From the first-principles calculations, we have investigated the elastic stiffness coefficients C₁₁, C₁₂, C₄₄ and the bulk modulus B of the II-VI semiconductors ZnS and MgS under hydrostatic pressure. The calculations are based on the density functional theory within the generalized gradient approximation (GGA) for exchange-correlation interaction. For the structural properties we have shown that ZnS adopt the rocksalt (NaCl or B1) structure over 11.87 GPa pressure, the same character is adopted by MgS over 0.8 GPa. The elastic coefficients have the same behavior for the different structures of alloys; they increase with increasing pressure values. Our results for the structural parameters and equilibrium phase elastic constants are in good agreement with the available theoretical and experimental data.     

First report on the presence of emerging Fusarium mycotoxins enniatins (A,A1, B,B1), beauvericin and fusaproliferin in rice on the Moroccan retail markets

Seventy samples of rice purchased from local markets in six cities from Morocco (Rabat, Casablanca, Kénitra, Mohammadia, Tanger and Errachidia) were analyzed for the presence of six emerging mycotoxins: four enniatins ENs (ENA, ENA₁, ENB and ENB₁), beauvericin (BEA) and fusaproliferin (FUS). Samples were extracted with a mixture of acetonitrile/water (85/15, v/v) by using an ultra-turrax homogenizer. Mycotoxins were then identified and quantified with liquid chromatography (LC) coupled to diode array detector (DAD). Positive samples were confirmed with an LC-MS/MS. Analytical results showed that BEA was present in 75.7% of total analyzed samples. BEA levels varied between 3.8 and 26.3 mg/kg. The frequencies of contamination of samples with total ENs and FUS were 50% and 4.3%, respectively. Among the ENs, ENB was the mycotoxin much more found (30% of total samples), while ENB₁, ENA and ENA₁ were found in 24.6%, 22.8% and 5.7% of total samples, respectively. The high ENs value was registered in a rice sample from kénitra (448.7 mg/kg of ENA₁). This is the first study that describes the presence of emerging Fusarium mycotoxins in rice available in Morocco.