Stent endoprosthesis for obstructing colorectal cancers

We present the case of a patient in whom hypotension, sudden cardiopulmonary arrest, and coma developed after a massive dose of a seemingly harmless cathartic agent. The diagnosis of hypermagnesemia was made 9 hours after the patient's admission, when the serum magnesium concentration was 21.7 mg/dL (8.9 mmol/L). The patient's condition improved with IV calcium, saline solution infusion, and cardiorespiratory support. The elimination half-life of magnesium in this case was 27.7 hours. Few cases have been reported in which patients have survived with serum levels greater than 18 mg/dL (7.4 mmol/L). This case provides evidence that hypermagnesemia may occur in patients with normal kidney function. The diagnosis of hypermagnesemia should be considered in patients who present with symptoms of hyporeflexia, lethargy, refractory hypotension, shock, prolonged QT interval, respiratory depression, or cardiac arrest.     

STRUCTURE FORMATION OF COATED FILMS WITH DISPERSED PIGMENTS DURING DRYING

In the drying of coated films with dispersed pigments, such as floppy disks, the structure of the film is formed during the drying process and depends on the drying condition. It is important to understand the structure formation during drying for the design of the dryer and die better quality of the product. We measured die drying characteristics of the film and determined the structure of dried film experimentally. A qualitative model for the structure formation during drying of the coated film is suggested.     

Effect of the Chiral Center Position of an Optically Active Terminal Group on the Induction of Optical Activity in Polysilanes

Summary Polysilanes with an optically active alkoxy group, i.e., (S)-(+)-2-butoxy, (R)-(-)-2-butoxy, (S)-(-)-2-methyl-1-butoxy, and (S)-(+)-3,7-dimethyl-1-octoxy, at the terminal positions, the chiral carbon centers of which were located at the α, β, and γ positions relative to the oxygen, respectively, were prepared, and the effect of the position of chiral center of the terminal optically active group on the induction of optical activity in polysilanes was investigated. The circular dichroism (CD) spectra of these polymers showed positive Cotton signals around 340 nm at temperatures below -20 °C, but the intensities were small, indicating that the optically active groups at the terminal positions have some ability, albeit small, to induce optical activity to the polysilanes. Further, the optically active (S)-(+)-2-butoxy and (R)-(-)-2-butoxy groups did not control the helical sense direction of the polymers, despite the different chiral stimuli from the 2-butoxy groups introduced to the terminal positions. To control the helical structure of polysilanes by the use of optically active terminal groups, appropriate optically active groups are required.     

Catalytic activity and solid acidity of vanadium oxide thin layer loaded on TiO2, ZrO2, and SnO2

Vanadium oxide spread highly on TiO₂ (anatase, A) and SnO₂, and rather densely on TiO₂ (rutile, R) and ZrO₂ to make the monolayer in less than 4–5 V nm⁻². Profile of acid site of the monolayer was measured by temperature programmed desorption of ammonia, and its relation with the surface oxidation state was studied. The acid site density was high on the V₂O₅/TiO₂ (A) independent of the degree of oxidation. On the other hand, that of V₂O₅/TiO₂ (R) and V₂O₅/ZrO₂ depended on the oxidation state, and the high value of the concentration was observed on the oxidized one. The strength of acid site generated on the V₂O₅ monolayer on TiO₂ was as high as on the HZSM-5 zeolite. Turnover frequency (TOF) of propane conversion, and product selectivity were measured in propane oxidation. Among tested oxides, the V₂O₅/TiO₂ (A) showed the high TOF and selectivity to form propylene, while those loaded on TiO₂ (R) and ZrO₂ the small TOF and poor selectivity. Therefore, the reaction profile of activity and selectivity could be related with the extent of spreading and solid acidity. An idea of limit of the acid site density ca. 1.5 nm⁻² on the monolayer was elucidated.     

First measurement of electron temperature from signal ratios in a double-pass Thomson scattering system

This paper presents an experimental demonstration to determine electron temperature (T(e)) with unknown spectral sensitivity (transmissivity) in a Thomson scattering system. In this method, a double-pass scattering configuration is used and the scattered lights from each pass (with different scattering angles) are measured separately. T(e) can be determined from the ratio of the signal intensities without knowing a real chromatic dependence in the sensitivity. Note that the wavelength range for each spectral channel must be known. This method was applied to the TST-2 Thomson scattering system. As a result, T(e) measured from the ratio (T(e,r)) and T(e) measured from a standard method (T(e,s)) showed a good agreement with <∣T(e,r) - T(e,s)∣∕T(e,s)> = 7.3%.     

Impact of Multimedia Traffic Characteristics on ATM Network Configuration

This paper proposes a new topological designmethod, named BXCQ, which optimizes logical networkconfiguration while guaranteeing Quality-of-Service(QoS) requirements for each service class in an ATMnetwork. The BXCQ method determines the optimum logicalnetwork topology associated with each service class soas to minimize network cost. In our previously proposedFull-Net architecture these different logical topologies can be suitably mapped at the sametime on the same ATM physical network by using theVirtual Channel Handler (VCH) to create differentlogical interconnection networks. The BXCQ method allows us to clarify the relations between multimediatraffic characteristics and desirable logical networkconfigurations in Full-Net. Evaluation results suggestthat a service class that is bursty, delay tolerant, and cell loss sensitive with small demandshould be supported by a loop-like topology. This studywill be useful for designing flexible and cost-effectivemultimedia networks that can also adapt to not-yet-known services.     

Characterization by Stm and Electrical Conductivity of Single-Walled Carbon Nanotubes

Abstract

Single-walled carbon nanotubes (SWCNT) prepared by a DC-Arc-Discharge and purified by a hydrothermal treatment followed by several steps of procedures including heating, burning, extracting and acid-washing are investigated by a conventional STM technique morphologically and spectroscopically. The electical resistivities of compacted pellets (mats) of SWCNT are measured as a function of temperature in the range from the room-temperature to 1.5K. The behaviors seems to be essentially originated in the metallic nature of individual SWCNT.     

Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).