Enhanced heat transfer in inclined solar chimneys by electrohydrodynamic technique

Heat transfer enhancement of natural convection inside the inclined solar chimneys is investigated using electrohydrodynamic technique. The interactions between electric field, flow field, and temperature field are analyzed. The ranges of parameters considered are 10⁴Ra10⁷, 7.5 kVV₀17.5 kV, 30°θ120°, and 2aspect ratio14. Flow and heat transfer enhancements are significantly influenced at low Rayleigh number. The optimum inclined angle which obtains maximum volume flow rate and heat transfer is found to be at θ=60°. A maximum volume flow rate enhancement is expressed in relation with the number of electrodes. The relation between aspect ratio of chimney and number of electrodes that performs the optimum condition between efficiency and economy is analyzed incorporating with all concerning parameters.     

Review of quantitative structure‐activity/property relationship studies of dyes: recent advances and perspectives

Dyes have been applied and are playing an increasingly important role in many industries, including the textile, printing, medical and energy industries. Their wide applications imply that specific dyes possessing given properties need to be effectively designed. The present review aims to survey information related to activity/property research of dyes that has been published in the past two decades. Emphasis is laid particularly on studies based on quantitative structure–activity/property relationships that have contributed to the theoretical design and application of dyes. Finally, the perspectives of quantitative structure‐activity/property relationship studies are set out in order to show how this method may be used to design new dyes and to evaluate their different properties. The challenges facing these studies are also outlined.     

Thermodynamic Analyses on Nanoarchitectonics of Perovskite from Lead Iodide: Arrhenius Activation Energy

Amongst the different perovskites being investigated for application in solar cells, one of the most frequently scrutinized is methylammonium lead iodide CH₃NH₃PbI₃ (or MAPbI₃), which is usually obtained by the reaction of lead iodide (PbI₂) with methylammonium iodide (MAI). Although this perovskite has been extensively studied and utilized in the manufacture of high-efficiency solar cells, its formation chemistry is still not well understood. Reliable experimental determination of the activation energy between PbI₂ and MAI has been difficult due to the rapid reaction at room temperature. In this work, we determined the activation energy by adopting the Arrhenius equation. This was possible by controlling the reaction using MAI vapor, instead of liquid solution. This procedure allowed the reaction to be carried out at temperatures of up to 150 °C. The formation of MAPbI₃ films was obtained by a two-step process: deposition of thin PbI₂ film by thermal evaporation and subsequent conversion into perovskite by exposure to MAI vapor. The conversion of PbI₂ to MAPbI₃ as a function of temperature was probed by X-ray diffraction. An activation energy of 0.12?±?0.02 eV was obtained. This low value explains the ease of MAPbI₃ formation at low temperatures, and partially explains its instability in environmental conditions.

     

Influence of Alkaline Additives and Buffers on Mineral Trapping of CO2 under Mild Conditions

Carbon dioxide (CO₂) gas is the main contributor to climate change. CO₂ storage in underground brines and oil‐field brines by mineral trapping has been considered as a promising alternative in order to reduce CO₂ emissions. However, permanent storage of CO₂ in stable carbonate minerals is greatly dependent on brine pH, being favored over an alkaline pH. The effect of alkaline additives (NaOH, KOH, CaO) and buffer solutions (NaHCO₃/NaOH, Na₂HPO₄/NaOH, NH₄Cl/NH₄OH) on the mineral trapping of CO₂ under mild conditions using a synthetic brine is investigated. The results indicate that both NaOH+NH₄Cl/NH₄OH and KOH+NH₄Cl/NH₄OH mixtures promote precipitation mainly of calcium carbonate (CaCO₃).     

Operational stability of immobilised lipase/acyltransferase during interesterification of fat blends

The lipase/acyltransferase from Candida parapsilosis is an unusual enzyme that preferably catalyses alcoholysis over hydrolysis in biphasic aqueous/organic media. The aim of this study was to evaluate the operational stability of an immobilised form of this enzyme during the interesterification of fat blends containing n‐3 polyunsaturated fatty acids, in solvent‐free media, at 60 °C, carried out continuously and batchwise. When the interesterification was performed in a continuous fluidised‐bed reactor, an operational half‐life of 9 h was estimated. The biocatalyst was also reused in consecutive 23‐h batches, in a total of four batches, either using fresh medium with no water addition or adding water to rehydrate the biocatalyst. When no water and extra water was added to the reaction medium, the obtained half‐lives were 10 and 18 h, respectively. Thus, the loss of activity may be explained by a progressive dehydration occurring along the reaction rather than by product or substrate inhibition effects. The interesterification activity was accompanied by changes in the acylglycerol profile. An increase in compounds of low equivalent carbon number (ECN) and in triacylglycerols (TAG) of ECN 42 and 44 was observed. This increase was accompanied by the consumption of TAG of ECN 46, 48 and 50.     

Sintering-driven effects on the band gap of (Pb,La)(Ti,Ni)O3 photovoltaic ceramics

In this work, the influence of the sintering temperature on the physical properties of (Pb_0.8La_0.2)(Ti_0.9Ni_0.1)O₃ (PLT-Ni) ceramics is reported. The experimental data revealed that the energy band gap of PLT-Ni ceramics could be tailored from approximately 2.7 to 2.0 eV by changing the sintering temperature from 1100°C to 1250°C. It is demonstrated that the simple substitution of Ti⁴⁺ by Ni²⁺ cations is effective to decrease the intrinsic band gap while increasing the tetragonality factor and the spontaneous polarization. However, the additional red-shift observed in the absorption edge of the PLT-Ni with increasing the sintering temperature was associated with a continuous increase in the oxygen vacancies () amount. It is believed that the impact of the creation of these thermally induced is manifold. The presence of and Ni²⁺ ions generate the Ni²⁺- defect-pairs that promoted both a decrease in the intrinsic band gap and an additional increase of the tetragonality factor, consequently, increasing the spontaneous polarization. The creation of Ni²⁺- defects also changed the local symmetry of Ni²⁺ ions from octahedral to a square pyramid, thus lifting the degeneracy of the Ni²⁺ 3d orbitals. With the increase in the sintering temperature, lower-energy absorbing intraband states were also formed due to an excess of , being responsible for an add-on shoulder in the absorption edge, extending the light absorption curve to longer wavelengths and leading to an additional absorption in “all investigated” spectrum as well.     

Antistatic packaging based on PTT/PTT-g-MA/ABS/MWCNT nanocomposites: Effect of the chemical functionalization of MWCNTs

Polymer/carbon nanotube nanocomposites have attracted high interest for a wide spectrum of applications, including antistatic packaging used to protect electronic devices against electrostatic discharge. Polytrimethylene terephthalate (PTT)/maleic-anhydride-grafted PTT (PTT-g-MA)/acrylonitrile butadiene styrene (ABS) blend-based multiwall carbon nanotubes (MWCNTs) nanocomposites were prepared through extrusion. It was conducted chemical functionalization on the MWCNTs by oxidation using nitric acid to introduce functional groups. The effect of the amount (0.5 or 1.0 wt%) and functionalization of MWCNTs on the nanocomposites was investigated. Despite the poor barrier properties of PTT/PTT-g-MA/ABS/MWCNT nanocomposites due to the presence of voids confirmed by scanning electron microscopy (SEM), the nanocomposites with functionalized MWCNT (MWCNTf) showed excellent barrier properties, indicating that the functionalization process improved the interaction between the MWCNTs and the matrix. The addition of MWCNTs into PTT/PTT-g-MA/ABS blend decreased the electrical resistivity by eight orders of magnitude. The use of MWCNTf may still disrupt the electrical network pathway and slightly decreasing the electrical resistivity, but the nanocomposites present the desired properties required for antistatic packaging.     

Increasing the photocatalytic and fungicide activities of Ag3PO4 microcrystals under visible-light irradiation

The present study reports for the first time the performance of silver phosphate (Ag₃PO₄) microcrystals as photocatalyst (degradation of Rodamine B-RhB) and antifungal agent (against Candida albicans–C. albicans) under visible-light irradiation (455 nm). Ag₃PO₄ microcrystals were synthesized by a simple co-precipitation (CP) method at room temperature. The structural and electronic properties of the as-synthetized Ag₃PO₄ have been investigated before and after 4 cycles of RhB degradation under visible light using X-ray diffraction (XRD), micro-Raman spectroscopy, UV–Vis spectrophotometer and field emission scanning electron microscopy (FE-SEM) images. The antifungal activity was analyzed in planktonic cells and 48h-biofilm of C. albicans by colony forming units (CFU) counting, confocal laser and FE-SE microscopies. Statistical analysis was carried out using SPSS software. Morphological and structural modifications of Ag₃PO₄ were observed upon recycling. After 4 recycles, the material maintained its photodegradation property; an eightfold increase in the efficiency of Ag₃PO₄ was observed in planktonic cells and a two fold increase in biofilm when irradiated under visible light. Thus, higher antifungal effectiveness against C. albicans was obtained when associated with visible-light irradiation.     

Electrohydrodynamic Induced Flow and Heat Transfer in Vertical Channel with Fin Array Attached

Electrohydrodynamic heat transfer enhancement of natural convection inside the finned vertical channels is investigated via a computational fluid dynamics technique. The interactions between electric field, flow field, and temperature field are numerically determined. Flow and heat transfer enhancements are significantly influenced at low Rayleigh number. The effect of electrode arrangement and number of electrodes to the average velocity and Nusselt number are expressed. An optimum inclined angle of the channel is recommended. Relation between the number of fins and fin length to the augmented flow and heat transfer is also analyzed.