Adsorption combined with ultrafiltration to remove organic matter from seawater

Organic fouling and biofouling are the major severe types of fouling of reverse osmosis (RO) membranes in seawater (SW) desalination. Low pressure membrane filtration such as ultrafiltration (UF) has been developed as a pre-treatment before reverse osmosis. However, UF alone may not be an effective enough pre-treatment because of the existence of low-molecular weight dissolved organic matter in seawater. Therefore, the objective of the present work is to study a hybrid process, powdered activated carbon (PAC) adsorption/UF, with real seawater and to evaluate its performance in terms of organic matter removal and membrane fouling. The effect of different PAC types and concentrations is evaluated. Stream-activated wood-based PAC addition increased marine organic matter removal by up to 70% in some conditions. Moreover, coupling PAC adsorption with UF decreased UF membrane fouling and the fouling occurring during short-term UF was totally reversible. It can be concluded that the hybrid PAC adsorption/UF process performed in crossflow filtration mode is a relevant pre-treatment process before RO desalination, allowing organic matter removal of 75% and showing no flux decline for short-term experiments.     

Reversible crosslinking of polymers bearing pendant or terminal thiol groups prepared by nitroxide-mediated radical polymerization

Monomers or N-alkoxyamine initiators containing protected thiol groups are utilized to prepare polymers via nitroxide-mediated radical polymerization. Following thiol deprotection, the macromolecular properties of these polymers are manipulated, by adjusting the redox conditions to either form or cleave disulfide bonds, or irreversibly cap free thiols by the rapid addition to a maleimide Michael acceptor. Formation of disulfide bonds under dilute conditions results in intramolecular disulfide formation, resulting in internal polymer collapse. Alternatively, disulfide formation under high concentration results in intermolecular crosslinking of polymers to form networked macromolecular assemblies.     

A sulfadimidine model to evaluate pharmacokinetics and residues at various concentrations in laying hen

Low level intake of drugs from the ingestion of contaminated feed may lead to residue problems in food animals. Sulfadimidine (SDD) was used as a model to determine the residue risk at various doses in laying hens. The drug was administered as a single intravenous injection (100 mg kg^-1 body weight, BW), as a single oral dose (100, 30, 10, 3, 1 mg kg^-1 BW) and via medicated feed for 7 consecutive days (30, 10, 3 mg kg^-1 BW). Drug levels were determined with HPLC-UV for plasma, yolk and albumen. Pharmacokinetic values, which were calculated using a first-order one-compartment model, residue levels and transfer rates into the eggs were found to be dose-dependent. Even low doses of 3 and 1 mg kg^-1 BW resulted in measurable residues in yolk and albumen 1 day after a single oral administration. After ingestion of medicated feed at 3 mg kg^-1 BW, mean drug levels at 0.14 ± 0.01 µg g^-1 were found in albumen and at 0.09 ± 0.01 µg ml^-1 in plasma. Generally, the residue levels in albumen and plasma were higher than in yolk. These findings demonstrate a residue risk for the consumer even after low level intake of drugs.     

Thermophysical Properties of Papaya Puree

The effects of soluble solids content and temperature on thermal properties of papaya puree were studied. Density and specific heat were measured using a pycnometer and differential scanning calorimeter, respectively, while thermal conductivity was measured using a line heat source probe. Thermal diffusivity was then calculated from the experimental results of the specific heat, thermal conductivity, and density. Thermal properties of papaya puree were experimentally determined within a soluble solids content range of 10 to 25 °Brix and temperature between 40 and 80°C. The density, specific heat, thermal conductivity, and thermal diffusivity of papaya puree were found to be in the ranges of 1014.6 to 1098.9 kg/m³, 3.652 to 4.092 kJ/kg °C, 0.452 to 0.685 W/m °C, and 1.127?×?10^?7 to 1.650?×?10^?7 m²/s, respectively. Moreover, the empirical models for each property as a function of soluble solids content and temperature were obtained.     

Artificial neural network modeling for temperature and moisture content prediction in tomato slices undergoing microwave-vacuum drying

ABSTRACT:  Inputs for ANN (multihidden-layer feed-forward artificial neural network) models were drying time ( t _{i + 1}), initial temperature ( T ₀), moisture content ( MC ₀), microwave power, and vacuum pressure. The outputs were temperature ( T _{i + 1}) and moisture content ( MC _{i + 1}) at a given t _{i + 1}. After training the ANN models with experimental data using the Levenberg-Marquardt algorithm, a two-hidden-layer model (25-25) was determined to be the most appropriate model. The mean relative error (MRE) and mean absolute error (MAE) of this model for T _{i + 1} were 1.53% and 0.77 °C, respectively. In the case of MC _{i + 1}, the MRE and MAE were 11.48% and 0.04 kg_water/kg_dry, respectively. Using temperature ( T _i ) and moisture content ( MC _i ) values at t _i in the input layer significantly reduced the computation errors such that MRE and MAE for T _{i + 1} were 0.35% and 0.18 °C, respectively. In contrast, these error values for MC _{i + 1} were 1.78% (MRE) and 0.01 kg_water/kg_dry (MAE). These results indicate that ANN models were able to recognize relationships between process parameters and product conditions. The model may provide information regarding microwave power and vacuum pressure to prevent thermal damage and improve drying efficiencies.     

Exopolysaccharide-producing lactic acid bacteria strains from traditional Thai fermented foods: isolation, identification and exopolysaccharide characterization

Lactic Acid Bacteria (LAB) isolated from various traditional Thai fermented foods were screened for exopolysaccharides (EPS) production. From 104 isolates, two rod-shaped and five coccal-shaped LAB were able to produce EPS from sucrose on solid media. However, only the cocci were capable of producing EPS in liquid media and these were identified as Pediococcus pentosaceus. Pediococcus pentosaceus strains AP-1 and AP-3 produced EPS in high yield. In liquid media containing sucrose as carbon source, the amount of EPS produced by AP-1 and AP-3 strains was 6.0 and 2.5 g/L, respectively. The isolated and purified EPSs were chemically characterized. On the basis of sugar composition, methylation analysis and nuclear magnetic resonance spectroscopy, both the EPSs were shown to belong to the same dextran class. In particular, both EPSs differed from linear dextran by branching through 3,6-di-Osubstituted alpha-D-glucopyranosyl residues. The EPS from P. pentosaceus AP-3 was characterized by a relatively higher degree of branching and by a higher molecular weight than that from P. pentosaceus AP-1.