Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, ¹³C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.     

Influence of different reactor types on Nannochloropsis oculata microalgae culture for lipids and fatty acid production

Greenhouse gases emitted into the atmosphere by burning of fossil fuels cause global warming. One option is obtaining biodiesel. Nannochloropsis oculata was cultured under different light intensities and reactors at 25°C for 21 days with f/2 medium to assess their effects on cell density, lipid, and fatty acids (FAs). N. oculata improved cell density on fed-batch glass tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, yielding 3.5 × 10⁸ cells ml⁻¹, followed by fed-batch Erlenmeyer flask (1 L) at 650 μmol E m⁻² s⁻¹ with 1.7 × 10⁸ cells ml⁻¹. The highest total lipid contents (% g lipid × g dry biomass⁻¹) were 44.4 ± 0.8% for the reactor (1 L) at 650 μmol E m⁻² s⁻¹ and 35.2 ± 0.2% for the tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, until twice as high compared with the control culture (Erlenmeyer flask 1 L, 80 μmol E m⁻² s⁻¹) with 21.2 ± 1%. Comparing the total lipid content at 200 μmol E m⁻² s⁻¹, tubular reactor (7 L) and reactor 1 L achieved 35.2 ± 0.2% and 28.3 ± 1%, respectively, indicating the effect of shape reactor. The FAs were affected by high light intensity, decreasing SFAs to 2.5%, and increased monounsaturated fatty acids + polyunsaturated fatty acids to 2.5%. PUFAs (20:5n-3) and (20:4n-3) were affected by reactor shape, decreasing by half in the tubular reactor. In the best culture, fed-batch tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹ contains major FAs (16:0; 38.06 ± 0.16%), (16:1n-7; 30.74 ± 0.58%), and (18:1n-9; 17.15 ± 0.91%).     

Topological Defects: Origin of Nanopores and Enhanced Adsorption Performance in Nanoporous Carbon

A scanning transmission electron microscopy investigation of two nanoporous carbon materials, wood‐based ultramicroporous carbon and poly(furfuryl alcohol)‐derived carbon, is reported. Atomic‐resolution images demonstrate they comprise isotropic, three‐dimensional networks of wrinkled one‐atom‐thick graphene sheets. In each graphene plane, nonhexagonal defects are frequently observed as connected five‐ and seven‐atom rings. Atomic‐level modeling shows that these topological defects induce localized rippling of graphene sheets, which interferes with their graphitic stacking and induces nanopores that lead to enhanced adsorption of H₂ molecules. The poly(furfuryl alcohol)‐derived carbon contains larger regions of stacked layers, and shows significantly smaller surface area and pore volume than the ultramicroporous carbon.     

The effect of processing conditions on microstructure of Pd-containing activated carbon fibers

Palladium-doped activated carbon fibers are being evaluated as candidate materials for enhanced hydrogen storage at near ambient conditions. Pd-doped fibers were spun using a Pd salt mixed with an isotropic pitch precursor. Experimental techniques such as in situ X-ray analysis, thermogravimetric studies, scanning transmission electron microscopy and gas adsorption were employed to understand how processing conditions for the production of Pd-doped activated carbon fibers affect the microstructure, pore development, and dispersion of metal particles throughout the fibers. The results showed that PdO phase is present in the stabilized fibers and that this oxide phase is stable up to about 250 °C. The oxide phase transforms into Pd metal with increasing heat treatment temperature, going through the formation of an intermediate carbide phase. Sintering of Pd particles was observed with heat treatment at temperatures over 750 °C. It was also found that pore development during physical activation with CO₂ was not significantly affected by the presence of Pd particles within the fibers.     

Changes in intramuscular fat, fatty acid profile and cholesterol content induced by zeranol implantation strategy in hair lambs

BACKGROUND: The effect of zeranol implantation strategy on intramuscular fat, fatty acid profile and cholesterol content of the longissimus dorsi muscle of hair lambs was studied. Four treatments were tested: C, control group; Z12, 12 mg zeranol; Z24, 24 mg zeranol in a single application; and RZ12, 12 mg zeranol given twice. One‐way analysis of variance was employed to estimate the effect of treatments (P < 0.05). To separate the effect of the mean, orthogonal contrasts were tested: C1, C versus Z12 + Z24 + RZ12; C2, Z12 versus Z24 + RZ12; and C3, Z24 versus RZ12. RESULTS: A decrease (P < 0.05) in intramuscular fat content was observed from implanting (C1 effect) and zeranol reimplantation (C3 effect). Implanted lambs exhibited an increase (P < 0.05) in monounsaturated fatty acids compared with control group (40.60% versus 35.35%). All contrasts were significant for the sum of n‐6 and n‐3, with values lower (P < 0.05) in the control (n‐6: 0.84% and n‐3: 1.38%) and higher in the RZ12 treatment (n‐6: 7.55% and n‐3: 14.9%). Cholesterol decreased by 78% with implantation and increasing the dose. CONCLUSION: The results indicate that it is possible to induce favorable changes in the fatty acid profile and cholesterol content using a zeranol implantation strategy on hair lambs. Copyright © 2011 Society of Chemical Industry     

STEM imaging of single Pd atoms in activated carbon fibers considered for hydrogen storage

Aberration corrected scanning transmission electron microscopy was used to demonstrate the feasibility of imaging individual Pd atoms that are highly dispersed throughout the volume of activated carbon fibers. Simultaneous acquisition of high-angle annular dark-field and bright-field images allows correlation of the location of single Pd atoms with microstructural features of the carbon host material. Sub-Ångström imaging conditions revealed that 18 wt% of the total Pd content is dispersed as single Pd atoms in three re-occurring local structural arrangements. The identified structural configurations may represent effective storage sites for molecular hydrogen through Kubas complex formation as discussed in detail in the preceding article.     

A review of homemade cosmetics based on a study of 150 blogs and their authors

Do-it-yourself methods have been used in many fields (cooking, home improvement, decoration, gardening, etc.) for a long time, but their application to the cosmetics sector is relatively recent and seems to be linked to a number of health scandals. The objective of this work is to analyse homemade cosmetics based on a study of blogs and their authors. We made a study of 150 blogs advocating homemade cosmetics. With only one exception, the blog authors were women, mostly in their thirties, with no specific qualifications or knowledge in the fields of cosmetic formulation or chemistry. The most highly qualified of them (with at least a Master's degree) had studied marketing and management. So, the situation is an illustration of the Dunning-Kruger effect, with authors believing themselves to be qualified in a field wholly outside their own. This leads to scientific falsehoods about, for example, preservatives like parabens and phenoxyethanol. On the contrary, the relevance of the ecological motivation frequently mentioned in these blogs is undeniable.     

Androgen regulation of lung lipids in the male rat

The aim of this study was to determine whether or not testosterone regulates the lipid concentration in rat lung tissue. Rats were either sham-operated controls, castrated, or castrated and injected with testosterone. Twenty-one days after castration, we observed in relation to the control: (i) Total lipids, phospholipids, and total cholesterol increased, while triglycerides decreased in whole lung. (ii) Phospholipid concentration increased in microsomes, lamellar bodies, and alveolar macrophages, but it decreased in extracellular surfactant. (iii) On a percentage basis, the concentration of phosphatidylcholine increased in microsomes, lamellar bodies, and alveolar macrophages, and it decreased in extracellular surfactant. (iv) Protein concentration decreased in extracellular surfactant and increased in microsomes, lamellar bodies, and alveolar macrophages. (v) The incorporation of [¹⁴C]glycerol into phospholipids of lung slices increased. (vi) The activity of CTP:phosphocholine cytidylyltransferase bound to the microsomal fraction increased without any change in the activity of the soluble form of the enzyme in the lung. The results obtained when testosterone was administered to castrated rats were similar to those obtained in the control in all cases. These results suggest that the lipid concentration in the lung is regulated at least partly directly or indirectly by androgens.     

Restricted dynamics of molecular hydrogen confined in activated carbon nanopores

Quasi-elastic neutron scattering was used for characterization of dynamics of molecular hydrogen confined in narrow nanopores of two activated carbon materials: a carbon derived from polyfurfuryl alcohol and an ultramicroporous carbon. Fast, but incomplete ortho–para conversion was observed at 10 K, suggesting that scattering originates from the fraction of unconverted ortho isomer which is rotation-hindered because of confinement in nanopores. Hydrogen molecules entrapped in narrow nanopores (<7 Å) were immobile below 22–25 K. Mobility increased rapidly with temperature above this threshold, which is higher than the melting point of bulk hydrogen (13.9 K). Diffusion obeyed fixed-jump length mechanism, indistinguishable between 2D and 3D processes. Thermal activation of diffusion was characterized between ～22 and 37 K, and structure-dependent differences were found between the two carbons. Activation energy of diffusion was higher than that of bulk solid hydrogen. Classical notions of liquid and solid do not longer apply for H₂ confined in narrow nanopores.