Beam test of the CsI(Tl) calorimeter for the BELLE detector at the KEK-B factory

We studied the performance of a prototype electromagnetic calorimeter for the BELLE detector at the KEK proton synchrotron for an energy range of 0.25–3.5 GeV. The prototype consisted of an array of 6 × 5 CsI(Tl) crystals with 30 cm length (16.2 radiation lengths) and about 6 cm × 6 cm cross section. The scintillation light of each CsI(Tl) crystal was read out by two large-area PIN photodiodes and charge-sensitive preamplifiers attached at the rear face of the crystal. We measured the energy and position resolution for electrons and the e/π separation for two sets of matrix configurations: one corresponded to the center and the other to the edge of the barrel calorimeter. The overall performance measured by the test proves that the prototype calorimeter is satisfactory for the use in the BELLE detector.     

FDTD analysis of switching characteristics in magnetooptic functional devices using magnetostatic surface waves

Collinear magnetooptic interaction with magnetostatic surface waves (MSSW) can be used for wavelength‐selective switches, wavelength filters, and frequency shifters in wavelength‐division‐multiplexed (WDM) photonic networks and optical processing systems. The switching efficiency can be improved with a multilayer waveguide structure. To investigate the dynamic switching characteristics, the FDTD method was employed. The mode conversion between TE and TM mode was successfully demonstrated with FDTD simulation. The filtering characteristics were also evaluated. The FDTD results were compared with the result from the coupled mode theory, and good agreement was obtained. Switching of an optical pulse was also demonstrated by the FDTD method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 40–47, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20501     

Subcellular localization of Bcl-2 protein in synovial sarcoma

The subcellular localization of Bcl-2 protein in surgically resected, fixed-frozen tissue specimens of seven tumors from six cases of synovial sarcoma and a synovial sarcoma cell line was examined using laser-scanning confocal microscopy and immunoelectron microscopy. Bcl-2 protein in synovial sarcoma cells was detected in the nuclear envelope, endoplasmic reticulum membrane, and mitochondrial circumference. Based on the finding of pre-embedding immunoelectron-microscopy observation, the distribution of Bcl-2 protein in such membranous organella was patchy. A computer-based image analysis failed to reveal any quantitative differences between the inner and the outer mitochondrial membranes. The tumorigenesis of synovial sarcoma is also discussed from the viewpoint of Bcl-2 overexpression.     

Dynamic moduli for short fiber-CR composites

The dynamic moduli, E′ and E″, and tan δ for nylon–CR and PET–CR composites with unidirectional short fibers were studied as a function of temperature by using a Rheovibron. The temperature dependence of tan δ showed two dispersion peaks for nylon–CR composite. The peak at ?28°C corresponded to the main dispersion of CR and the peak at 100°C to the α-dispersion of nylon 6. For a PET-CR composite, in addition to the individual dispersion of CR and PET, a small and broad peak was observed at about 90°C. The angular dependence of E′ indicated that the short fibers assumed good orientation. The storage modulus for the composites was given by the parallel model as E′ = V_f′E_f + V_mE′_m., where E′_c, E′_f and E′_m were the storage modulus for the composite, fiber, and matrix and V_f and V_m were the volume fraction of fiber and matrix, respectively. In the transverse direction of fiber, the peak values of tan δ at ?28°C were given by the following equation; tan δ_c = tan δ_m ? δV_f, where tan δ_c and tan δ_m are the loss tangent for the composite and matrix, respectively, and α is coefficient depending on fiber type. The results indicated that a region with strong interaction was formed between fibers and CR matrix.     

Prediction model of compressive strength development of fly-ash concrete

Based on experimental results concerning the compressive strength development of concrete containing fly ash, the authors derived an estimation equation for compressive strength development. The equation can express coefficient , which indicates the activity of fly ash as a binder, in the form of a function of age, fly-ash content, and Blaine specific surface area of fly ash.

This equation is capable of explaining the increases in the early strength due to fly ash in place of part of fine aggregate, the decreases in the early strength due to fly ash in place of part of cement, the increases in the long-term strength due to pozzolanic reaction, the relationship between the fly-ash replacement ratio and the ratio of strength increase/decrease, and the effect of fly ash's Blaine specific surface area on the strength.     

Three-dimensional board-to-board free-space optical interconnects and their application to the prototype multiprocessor system: COSINE-III

A prototype multiprocessor system using three-dimensional board-to-board free-space optical interconnects is constructed for the first time to our knowledge. In the system, 64 processing units form a three-dimensional mesh processor network with the help of bidirectional board-to-board free-space optical interconnects. A theoretical analysis shows that the three-dimensional board-to-board freespace optical interconnects effectively solve common interconnection problems such as wiring congestion, signal delay, and clock skew. The prototype system, COSINE-III, is confirmed to work well as a multiprocessor system. The system is also shown to be easy to extend to a larger and more flexible system.     

Linear bipolar OTAs employing exponential‐law circuits

This paper presents design of linear bipolar OTAs, which are composed of two function blocks; one is an exponential‐law circuit and the other is a core cell. Multi‐tanh cells are employed as the core cell. This kind of OTA has lower power dissipation relatively to the conventional multi‐tanh cell. According as the order of the multi‐tanh core cell becomes higher, the number of circuit realization for the core cell increases. For example, we have two OTAs for the core circuit of an emitter‐coupled pair and four OTAs for the doublet core cell. Thus, we consider the generalized OTAs for an arbitrary order n of the core cell and obtain a formula to give the realization number of the linear OTAs for n. According to the formula, there must be eight OTAs in the case of n=3. All of the eight OTAs are examined. Analysis and simulation results show that the OTAs have advantage in their characteristics, such as linear input range, power dissipation, noise, and frequency response. Copyright 2004 John Wiley & Sons, Ltd.