Isometric Texture Mapping for Free-form Surfaces

Texture mapping is a frequently exploited technique in computer graphics aimed at the emulation of high-resolution details in surfaces. In this paper we present a distance-ratios preservation method for bivariate raster texture mapping to free-form surfaces in an arbitrarily precise manner. The proposed method reduces the original general problem of computing the inverse of a three-dimensional parametric surface mapping into a problem of two-dimensional image warping. Several examples that demonstrate the proposed approach are also provided.     

Selective determination of urea using urease immobilized on ZnO nanowires

Well-aligned zinc oxide (ZnO) nanowire arrays were fabricated on gold-coated plastic substrates using a low-temperature aqueous chemical growth (ACG) method. The ZnO nanowire arrays with 50–130 nm diameters and ∼1 μm in lengths were used in an enzyme-based urea sensor through immobilization of the enzyme urease that was found to be sensitive to urea concentrations from 0.1 mM to 100 mM. Two linear sensitivity regions were observed when the electrochemical responses (EMF) of the sensors were plotted vs. the logarithmic concentration range of urea from 0.1 mM to 100 mM. The proposed sensor showed a sensitivity of 52.8 mV/decade for 0.1–40 mM urea and a fast response time less than 4 s was achieved with good selectivity, reproducibility and negligible response to common interferents such as ascorbic acid and uric acid, glucose, K⁺ and Na⁺ ions.     

Wire antennas optimized using genetic algorithm

In this work, wire antennas are designed to jam GSM frequencies using genetic algorithms. These antennas are designed to block communication at 3-band GSM frequencies. They are planned to be mounted on a vehicle and therefore are modeled on a ground plane. Jammer antennas designed in this work are composed of wires, placed on two square dielectric frames, perpendicular to each other. Genetic optimization routines are developed on MATLAB environment for the designs carried out in this work. Electromagnetic simulation program called SuperNEC, which analyses antennas by the method of moments, is used to determine the antenna performances and is called by the developed GA routines. The purpose of the antenna optimization is to obtain low VSWR values and omni-directional radiation pattern near ground at θ = [70° 80° 90°] planes at all GSM frequencies, since the targets will be near ground for this application. Original and interesting antenna designs are obtained as the result of genetic optimization, and are presented in the paper.     

GENOTOXICITY IN CHIRONOMUS KIIENSIS (CHIRONOMIDAE: DIPTERA) AFTER EXPOSURE TO POLLUTED SEDIMENTS FROM RIVERS OF NORTH PENINSULAR MALAYSIA: IMPLICATION FOR ECOTOXICOLOGICAL MONITORING

Rapid industrialization and urbanization has led to increasing input of chemical contaminants into the aquatic environment of Malaysia. Despite the threat civilization poses to the biota, there are still very few relevant studies on ecotoxicological testing of river ecosystems. To overcome this knowledge gap, we examined lethal and genotoxic effects of sediments from different rivers of the northern Malaysia against Chironomus kiiensis, a group well represented in the aquatic fauna of this region. We exposed the larvae to sediments from Selama River (SR), Permatang Rawa River (PRR) and Kilang Ubi River (KUR) at various durations (0, 6, 12, 24 and 48 h). The larval mortality was monitored, whereas DNA damage in survivors' cells was determined using the comet assay. Pollution level indexed by the amounts of heavy metals and other organic contaminants in the sediment showed progressive increases from SR to PRR to KUR. Highly polluted sediments (PRR to KUR) were detrimental to C. kiiensis larvae, most of which did not survive following exposure for long periods. DNA analyses revealed greater damages in nuclei derived from larvae maintained on polluted sediments, in particular, those from KUR. The effects on the genomic material of C. kiiensis larvae occurred in a time‐dependent manner, with damage level increasing as exposure time progressed. Our results highlight the genotoxic properties of polluted sediments. More importantly, this study showed that C. kiiensis larvae could respond to different levels of pollution with respect to exposure time. It is concluded that C. kiiensis larvae is a potential candidate for river ecotoxicological monitoring. Copyright © 2012 John Wiley & Sons, Ltd.     

A new external sorting algorithm with no additional disk space

This paper is concerned with an external sorting algorithm with no additional disk space. The proposed algorithm is a hybrid one that uses Quicksort and special merging process in two distinct phases. The algorithm excels in sorting a huge file, which is many times larger than the available memory of the computer. This algorithm creates no extra backup file for manipulating huge records. For this, the algorithm saves huge disk space, which is needed to hold the large file. Also our algorithm switches to special merging process after the first phase that uses Quicksort. This reduces the time complexity and makes the algorithm faster.     

A non-contact method for part-based process performance monitoring in end milling operations

Surface response to excitation (SuRE) method was originally developed for structural health monitoring (SHM) applications. SuRE was used to evaluate the performance of completed milling operations. The method generates surface waves on the plate and studies the spectrum changes at selected points to detect defects and change of compressive forces. In this study, the length, depth, and width of a slot were changed step by step. The surface of the aluminum plate was excited in the 20–400 kHz range with a piezoelectric element. A laser scanning vibrometer was used to monitor the vibrations at the predetermined grid points after the dimensions of the slot were changed methodically. The frequency spectrums of measured vibrations were calculated by using the Fast Fourier Transformation (FFT). The sums of the squares of the differences (SSD) of the spectrums were calculated to evaluate the change of the spectrums. The SuRE method was able to determine if the dimensions were changed in each case at all the selected points. The scanning laser vibrometer is not feasible to be used at the shop floor. However, the study demonstrated that a piezoelectric element attached to any of the grid points would be able to evaluate the completed machining process.     

Hierarchical behavior categorization using correlation based adaptive resonance theory

This paper introduces a new model for robot behavior categorization. Correlation based adaptive resonance theory (CobART) networks are integrated hierarchically in order to develop an adequate categorization, and to elicit various behaviors performed by the robot. The proposed model is developed by adding a second layer CobART network which receives first layer CobART network categories as an input, and back-propagates the matching information to the first layer networks. The first layer CobART networks categorize self-behavior data of a robot or an object in the environment while the second layer CobART network categorizes the robot's behavior with respect to its effect on the object. Experiments show that the proposed model generates reasonable categorization of behaviors being tested. Moreover, it can learn different forms of the behaviors, and it can detect the relations between them. In essence, the model has an expandable architecture and it contains reusable parts. The first layer CobART networks can be integrated with other CobART networks for another categorization task. Hence, the model presents a way to reveal all behaviors performed by the robot at the same time.     

Identifying critical autonomous systems in the Internet

The Internet not only facilitates our daily activities, such as communication, entertainment and shopping but also serves as the enabling technology for many critical services, including finance, manufacturing, healthcare and transportation. On the other hand, a wide spectrum of attacks targets its communication infrastructure to disable or disrupt the network connectivity and traffic flow until recovery processes take place. Attacking all autonomous systems (ASes) in the Internet is typically beyond the capability of an adversary. Therefore, targeting a small number of ASes which results in the highest impact is the best strategy for attackers. Similarly, it is important for network practitioners to identify, fortify and secure those critical ASes to mitigate the impact of the attacks. In this study we introduce an intuitive and effective measure, IP address spatial path stress centrality, to assess and identify the critical ASes in the Internet. We compare IP address spatial path stress centrality to the three well-known and widely used centrality measures, namely customer-cone size, node degree and betweenness. We demonstrate that the proposed measure incorporates business relations and IP address spaces to achieve a better measure for identifying the critical ASes in the Internet.     

Biodegradation of phenol by Synechocystis sp. in media including triacontanol hormone

Phenol removal levels of Synechocystis sp. were investigated in BG11 media with 10 mg/L triacontanol (TRIA) and without it to test whether the hormone could increase the removal efficiency by increasing biomass. The assays were performed to determine the effect of light on degradation, in media with 119.0–492.8 mg/L phenol under light and dark conditions. At increasing phenol concentrations, the degradation ranged between 98.5 and 100% regardless of a dark or a light condition. Experiments were carried out under light to determine the optimum pH for effective degradation. Optimum pH was found to be 6.5 at 200 mg/L phenol with or without TRIA. Phenol degradation was investigated in the 120.2–826.9 mg/L range. Although 377.4 mg/L phenol was completely degraded in hormone controls within 120 h, degradation was increased by TRIA, and the process was completed in 96 h. These data suggest that Synechocystis sp. has potential for use in the treatment of wastewaters containing phenol.     

Effects of peroxide crosslinking on the mechanical and morphological properties of poly(ethylene‐co‐vinyl acetate)/zeolite composites

Uncrosslinked and chemically crosslinked ethylene‐vinyl acetate copolymers (EVAs) with 5–25 volume percentages of zeolite were prepared in a melt‐mixing process and then compression‐molded on a hot‐press machine according to standard test specifications. The mechanical properties measured by tensile test showed a reduction in tensile strength and elongation at break with increasing zeolite content. However, an increasing trend was observed for tensile modulus with addition of zeolite. Experimental results for ultimate stress were compared with those from Pukanszky equation. The experimental data showed a good fit to the Pukanszky model. The improvement in the interfacial interaction for crosslinked composites was also confirmed by this model. Morphological changes of EVA/zeolite composites were analyzed by scanning electron microscopy (SEM). The fractured surface of the composites indicated more complex morphology at higher zeolite loading. The influence of crosslinking induced by 2 wt% of dicumyl peroxide on the properties of EVA/zeolite composites was also investigated. The crosslinked composites showed better tensile properties than the uncrosslinked ones, a result which might be an indication of enhanced interaction between the EVA and zeolite. Density measurements, gel content determinations, and Fourier transform infrared analyses were also performed to evaluate the crosslink content of the composites. The changes in the properties of chemically crosslinked EVA/zeolite composites were observed. Meanwhile, SEM micrographs of the crosslinked EVA/zeolite composites showed better interfacial strength between zeolite and the EVA matrix as compared to that of the uncrosslinked composites. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers