Modeling of a constant Voltage transformer

This paper presents a comprehensive nonlinear model of the controlled constant voltage transformer also known as the ferroresonant transformer. Saturation is a normal mode of operation for this device. This paper derives an equivalent electrical circuit that relates to the physical structure of a typical design. The level of detail includes winding resistances, continuously nonlinear magnetizing inductances, tapped windings, and leakage inductances. The paper describes methods to extract the winding resistances, leakage inductances, and hysteresis loops of the transformer and how to fit the latter into single-valued nonlinear functions. The paper compares computer simulation results of the model with those obtained analytically and experimentally. The results show that the derived circuit will be very useful for designers of the ferroresonant transformer, which is used in uninterruptible power supplies.     

Supercritical fluid extraction of daphne (Laurus nobilis L.) seed oil

Laurus nobilis L., commonly known as daphne tree, is an evergreen that belongs to the Lauraceae family. Daphne trees produce grape-sized shiny purplish berries having three parts: flesh, skin, and an inner kernel (single seed). This study examines supercritical CO₂ (SC-CO₂) extraction of oil from daphne seeds. The oil yield of ground seeds varied from 14 to 28% depending on the method and particle size used for oil recovery. Yields were similar for both petroleum ether and SC-CO₂ extraction. The extraction yield decreased significantly with increasing particle size. The amount of extract collected increased exponentially with increasing SC-CO₂ pressure. The highest extraction yield was obtained at the highest temperature studied, 75°C. More than 45% of the oil was lauric acid. SC-CO₂ is a viable technique to obtain high-purity L. nobilis L. seed oil, which is a potential ingredient for the cosmetic industry.     

Strength and fracture behaviour of diffusion bonded joints in Al-Li (8090) alloy

Peel strengths at room temperature and under superplastic forming conditions at 530 °C were measured for diffusion-bonded joints in Al-Li 8090 alloy sheet. The bonds were made in the solid state, or via a transient liquid phase using interlayers. The effect of strain rate, sheet thickness and heat treatment were investigated. The significance of these results for the testing of DB joints and for their use in DB/SPF structures is discussed.     

An experimental study on air window collector having a vertical blind for active solar heating

In this study, an air window collector having vertical black blinds was investigated experimentally under actual outdoor conditions. The vertical blind was installed between two 120 × 80 cm glass panes. It can rotate about the vertical axis. The fully open position makes a 90° angle with the vertical plane. A commercially available blind made of cloth and coated with black paint was tested. The air circulation in the system is provided by a fan parallel to blinds. Various parameters were measured and recorded using a data acquisition system. The effect of these parameters on the thermal performance of the system were determined experimentally.     

An experimental and three-dimensional numerical study of natural convection heat transfer between two horizontal parallel plates

In this study, experimental and three-dimensional numerical studies were performed to investigate the effects of plate spacing and temperature difference on natural convection between isothermally heated upward-facing lower horizontal plate and externally insulated horizontal upper plate. Air is used as the heat transfer medium. Rayleigh number varied in the 1108–2.339 × 10⁵ range. Several numerical simulations for three-dimensional steady laminar and turbulent flows heat transfer were carried out using a commercial CFD code Fluent 6.2. Results have shown that there is a good agreement between the numerical and present experimental results as well as with available data in literature.     

Critical strength criteria for DB/SPF processing of Al-Li 8090 alloy

Peel strengths are reported for solid state or transient liquid-phase diffusion-bonded (DB) joints between aluminium-lithium 8090 alloy sheets. The joints were tested under superplastic forming (SPF) conditions at 530 °C and with a progressively increasing peel angle,, in the range 0°–60°. The sheet deformed superplastically with or without peel fracture of the joints. A deformation model is proposed which predicts a critical combination of peel strength and superplastic flow stress for DB/SPF processing of the 8090 alloy and indicates peel fracture will occur when sheet thicknesses exceed 2 and 0.8 mm in solid state and transient liquid-phase diffusion-bonded joints, respectively.     

A comprehensive survey: artificial bee colony (ABC) algorithm and applications

Swarm intelligence (SI) is briefly defined as the collective behaviour of decentralized and self-organized swarms. The well known examples for these swarms are bird flocks, fish schools and the colony of social insects such as termites, ants and bees. In 1990s, especially two approaches based on ant colony and on fish schooling/bird flocking introduced have highly attracted the interest of researchers. Although the self-organization features are required by SI are strongly and clearly seen in honey bee colonies, unfortunately the researchers have recently started to be interested in the behaviour of these swarm systems to describe new intelligent approaches, especially from the beginning of 2000s. During a decade, several algorithms have been developed depending on different intelligent behaviours of honey bee swarms. Among those, artificial bee colony (ABC) is the one which has been most widely studied on and applied to solve the real world problems, so far. Day by day the number of researchers being interested in ABC algorithm increases rapidly. This work presents a comprehensive survey of the advances with ABC and its applications. It is hoped that this survey would be very beneficial for the researchers studying on SI, particularly ABC algorithm.     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part I. The Effects of Loading Rate, Test Temperature, Fiber Sizing and Global Strain Level

The effects of loading rate, fiber sizing, test temperature and global strain level on the adhesion strength between carbon fibers and a thermosetting epoxy (Epon 815) are studied using the single fiber fragmentation test procedure. Analytical methodology describing the viscoelastic behavior observed is also presented. The possibility of rate-temperature-interphase thickness superposition for the interfacial strength function is illustrated based on the analytical models discussed. Experimental data are discussed using Weibull statistics and also presented in the form of percent relative frequency histograms for the fiber fragments in a collective fashion. The use of histograms allows for interpretation of the skewness in the data population.     

A reservoir serves as refuge for adults of the endangered Macquarie perch

Home‐range estimates are an important input to species recovery plans. Our aim was to estimate the home‐range size of the endangered Macquarie Perch in the lower Cotter River catchment, Australia. In total, fourteen home‐range estimates were calculated from intensive radio‐tracking of adult individuals over a minimum of five diel periods in either autumn (n = 5) or spring (n = 9). Home‐range (95% Kernel) and core area (50% Kernel) were calculated by Kernel estimation and corrected for overlap with land. Seasonal estimates of home‐range and core area were not asymptotic in relation to cumulative number of radio‐fixes in four of fourteen cases. The mean within‐season home‐range of adult Macquarie perch was 5.5 ha ranging from 0.2 to 18.4 ha, based on 10 cumulative estimates that were asymptotic in relation to radio‐tracking effort. All five individuals radio‐tracked in autumn occupied a single core area, whereas in spring, six individuals occupied a single core area and three individuals each occupied three core areas. Despite individuals moving on a scale almost comparable to Cotter Reservoir (48.5 ha), only a single radio‐tagged individual was found to leave the reservoir and enter the river. Regional fisheries managers are generally aware of the requirement for Macquarie perch to access flowing water for spawning in south‐eastern Australia; however, in the Cotter River catchment, the protection of habitat for this species within Cotter Reservoir is also paramount. Our study highlights the importance of reservoirs for conserving a threatened aquatic species.