A self‐correction technique for real‐time simulation of regulated rivers

An automatic self‐correction scheme is presented for online adjustment of stream‐flow forecasts during simulation of river systems with regulating structures, when actual flow data for interior points are available in real time. Another scheme is presented which allows for the modelling of channel losses due to physical effects such as evapotranspiration, bank storage and diversions. A previously developed river simulation/reservoir management model has been modified to include both schemes. The model is particularly useful for real‐time, short‐term flood forecasting and reservoir operation. The model application is made to the Lower Colorado River in Texas.     

Multi-verse optimization algorithm- and salp swarm optimization algorithm-based optimization of multilevel inverters

Neural Computing and Applications - Renewable energy sources are installed into both distribution and transmission grids more and more with the introduction of smart grid concept. Hence, efficient...     

Aromatic products of 340 °C supercritical-toluene extraction of two Turkish lignites: an n.m.r. study

Fractions of Elbistan and Seyitomer (Turkish) lignites, extracted with supercritical toluene at 340 °C and 8 MPa, have been separated by solvent extraction and silica-gel chromatography. Analyses by n.m.r. and i.r. spectroscopies and other methods have been combined in structural-analysis schemes to yield information about the average molecule in aromatic extracts. Carbon aromaticities, f_a, derived from 22.63 MHz ¹H-decoupled pulse Fourier-transform (PFT) ¹³C-n.m.r. are more widely spread for Elbistan (0.34–0.56) than for Seyitomer (0.40–0.43), and are lower than for supercritical-gas (SCG) products from bituminous coals. ¹³C-n.m.r. also reveals the presence of aromatic ether-O in polar fractions. Narrow aromatic signals in 100 MHz ¹H-n.m.r. spectra suggest the presence of single-aromatic-ring average structures. In the hexane-soluble aromatics, 27% (Elbistan) and 29% (Seyitomer) of the available sites are substituted by alkyI groups, some of which are at least eight carbon atoms long; the hexane-soluble polar and asphaltene/asphaltol fractions contain fewer such groups.     

A two-phase variable neighbourhood search algorithm for assembly line worker assignment and balancing problem type-II: an industrial case study

The assembly line worker assignment and balancing problem type-II (ALWABP-2) occurs when workers and tasks (where task times depend on workers’ skills) are to be simultaneously assigned to a fixed number of workstations with the goal of minimising the cycle time. In this study, a two-phase variable neighbourhood search (VNS) algorithm is proposed to solve the ALWABP-2 due to the NP-hard nature of this problem. In the first phase of the algorithm, a VNS approach is applied to assign tasks to workstations with the aim of minimising the cycle time while in the second phase, a variable neighbourhood descent method is applied to assign workers to workstations. The performance of the proposed algorithm is tested on well-known benchmark instances. In addition, the proposed algorithm has been used to solve a real case study from a consumer electronics company that manufactures LCD TVs. The results show that the algorithm is superior to the methods reported in the literature in terms of its higher efficiency and robustness. Furthermore, the algorithm is easy to implement and significantly improves the performance of the final assembly line for the investigated LCD TV real case study.     

Eigenclassifiers for combining correlated classifiers

In practice, classifiers in an ensemble are not independent. This paper is the continuation of our previous work on ensemble subset selection [A. Ula?, M. Semerci, O.T. Y?ld?z, E. Alpayd?n, Incremental construction of classifier and discriminant ensembles, Information Sciences, 179 (9) (2009) 1298–1318] and has two parts: first, we investigate the effect of four factors on correlation: (i) algorithms used for training, (ii) hyperparameters of the algorithms, (iii) resampled training sets, (iv) input feature subsets. Simulations using 14 classifiers on 38 data sets indicate that hyperparameters and overlapping training sets have higher effect on positive correlation than features and algorithms. Second, we propose postprocessing before fusing using principal component analysis (PCA) to form uncorrelated eigenclassifiers from a set of correlated experts. Combining the information from all classifiers may be better than subset selection where some base classifiers are pruned before combination, because using all allows redundancy.     

Cost-conscious comparison of supervised learning algorithms over multiple data sets

In the literature, there exist statistical tests to compare supervised learning algorithms on multiple data sets in terms of accuracy but they do not always generate an ordering. We propose Multi²Test, a generalization of our previous work, for ordering multiple learning algorithms on multiple data sets from “best” to “worst” where our goodness measure is composed of a prior cost term additional to generalization error. Our simulations show that Multi²Test generates orderings using pairwise tests on error and different types of cost using time and space complexity of the learning algorithms.     

Preparation of dye sensitized titanium oxide nanoparticles for solar cell applications

A new method for synthesis of titanium dioxide (TiO₂)-dye nanoparticles is reported. TiO₂ nanocrystals were obtained at 150 and 200 °C by using chemically bonded TiO₂-sensitizer dye as a precursor. Titanium tetraisopropoxide was first modified with a dye molecule and then precipitated by dropping into acidic water. A strongly colored precipitate was obtained. Hydrothermal growth of a colloidal solution was carried out in a Teflon-lined stainless steel autoclave. Dye sensitized solar cell efficiencies obtained were comparable and fill factor values were close to the analogous cells prepared by the use of conventional TiO₂ paste techniques. This method allows the use of different substrates together with nanocrystalline TiO₂ for many technological applications.     

Transferrin-Decorated Niosomes with Integrated InP/ZnS Quantum Dots and Magnetic Iron Oxide Nanoparticles: Dual Targeting and Imaging of Glioma

The development of multifunctional nanoscale systems that can mediate efficient tumor targeting, together with high cellular internalization, is crucial for the diagnosis of glioma. The combination of imaging agents into one platform provides dual imaging and allows further surface modification with targeting ligands for specific glioma detection. Herein, transferrin (Tf)-decorated niosomes with integrated magnetic iron oxide nanoparticles (MIONs) and quantum dots (QDs) were formulated (PEGNIO/QDs/MIONs/Tf) for efficient imaging of glioma, supported by magnetic and active targeting. Transmission electron microscopy confirmed the complete co-encapsulation of MIONs and QDs in the niosomes. Flow cytometry analysis demonstrated enhanced cellular uptake of the niosomal formulation by glioma cells. In vitro imaging studies showed that PEGNIO/QDs/MIONs/Tf produces an obvious negative-contrast enhancement effect on glioma cells by magnetic resonance imaging (MRI) and also improved fluorescence intensity under fluorescence microscopy. This novel platform represents the first niosome-based system which combines magnetic nanoparticles and QDs, and has application potential in dual-targeted imaging of glioma.     

Effects of crushed clay brick aggregate on mortar durability

This paper reports an experimental study that aimed to investigate the effects of recycled clay brick, used as a part of fine aggregate, on mortar durability. The brick, in crushed form, was from a local brick manufacturer that salvages its off-standard products. It was used to replace 10% and 20% (by weight) of the river sand in mortar. Effects of the brick replacement on the mortar flow, compressive strength, shrinkage, freeze–thaw resistance, and alkali–silica reaction potential were investigated. The results showed that as the brick replacement level increased, the mortar flowability reduced. The 10% and 20% brick replacements had no negative effect on the mortar compressive strength and very limited effect on the mortar shrinkage. The freeze–thaw resistance of the mortar was improved by the brick replacement. However, the use of crushed brick as aggregate appeared not to reduce potential alkali–silica reaction. The microscopy study revealed the alkali–silica reaction product and associated cracking in the mortar. Additional study indicated that the brick aggregate used in the study had pessimum proportion, 30%, for the alkali–silica reaction expansion.