Analysis of corrosion resistance behavior of inhibitors in concrete using electrochemical techniques

Reinforced concrete is one of the most durable and cost effective construction materials. However, in high chloride environments, it can suffer from corrosion due to chloride induced breakdown of the normal passive layer protecting the reinforcing steel bars inside concrete. One means of protecting embedded steel reinforcement from chloride induced corrosion is the addition of corrosion inhibiting admixtures. In the present investigation, various inhibitors such as sodium nitrite, zinc oxide, mono ethanol amine, diethanolamine, and triethanol amine have been used in concrete in different percentages. Their effectiveness was then studied using various electrochemical techniques such as rapid chloride ion penetration test, open circuit potential measurement, electrochemical impedance measurement, potentiodynamic polarization measurement, and gravimetric weight loss measurement. The results thus obtained indicate that the addition of inhibitors enhances the corrosion resistance properties.     

Electrochemical capacitance of nanostructured ruthenium-doped tin oxide Sn<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Ru<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> by the microemulsion method

Synthesis of nanostructured Ru-doped SnO₂ was successfully carried out using the reverse microemulsion method. The phase purity and the crystallite size were analyzed by XRD. The surface morphology and the microstructure of synthesized nanoparticles were analyzed by SEM and TEM. The vibration mode of nanoparticles was investigated using FTIR and Raman studies. The electrochemical behavior of the Ru-doped SnO₂ electrode was evaluated in a 0.1 mol/L Na₂SO₄ solution using cyclic voltammetry. The 5% Ru-doped SnO₂ electrode exhibited a high specific capacitance of 535.6 F/g at a scan rate 20 mV/s, possessing good conductivity as well as the electrocycling stability. The Ru-doped SnO₂ composite shows excellent electrochemical properties, suggesting that this composite is a promising material for supercapacitors.     

Effect of ecofriendly sealing coat against corrosion protection of steel rebars in concrete

Phosphating is one of the most important chemical conversion treatments for steel, mainly to improve corrosion resistance and paint adhesion and as an absorbing layer for waxes, oils, lacquers, etc. However, phosphate coating are crystalline and porous and need a sealing treatment after phosphating. Chromate sealing is a well known practice, and due to its toxicity, development of an ecofriendly sealing treatment is very essential. This paper focuses on the effect of zinc phosphate chemical conversion coating with the addition of nano-SiO₂ to protect the mild steel rebars against corrosion in chloride contaminated concrete. The coated surfaces were characterised by scanning electron microscopy and X-ray diffraction. Corrosion resistances of coated and uncoated rebars were evaluated by anodic polarisation, linear polarisation resistance, Tafel and alternating current impedance spectroscopy and cyclic polarisation technique. The results indicated that the coated rebars have considerably reduced the corrosion rate even in the presence of 3% chloride environments.     

Evaluation of embeddable potential sensor for corrosion monitoring in concrete structures

Embeddable potential sensor based on MnO₂ was assembled and characterised in concrete. The stability, reversibility, polarisability and impedance characteristics have been studied with respect to known reference. The corrosion performance of reinforced steel with respect to MnO₂ sensor was monitored by different electrochemical techniques. Reversibility of MnO₂ sensor indicated that difference of ±5 mV between the forward and reverse scan indicates the better reversibility characteristics in concrete. The rebar potentials (E_R) of steel with respect to MnO₂ are −315 and −525 mV for passive and active conditions of rebar in concrete. The corrosion current from potentiodynamic polarisation and R_ct from a.c. impedance technique clearly differentiated the behaviour of steel embedded in chloride contaminated concrete (active condition) from uncontaminated concrete (passive condition) with respect to MnO₂ sensor. All these studies revealed that corrosion monitoring of steel in concrete using embedded MnO₂ as a better potential sensor for steel in concrete. In addition it is easy to fabricate for amenable miniaturisation, varied configuration as demanded for corrosion monitoring in concrete structures.     

A novel bio-inorganic bone implant containing deglued bone, chitosan and gelatin

With the aim of developing an ideal bone graft, a new bone grafting material was developed using deglued bone, chitosan and gelatin. Deglued bone (DGB) which is a by-product of bone glue industries and has the close crystallographic similarities of hydroxyapatite was used as main component in the preparation of bone implant. Chitosan was prepared from the exoskeleton of prawn (Pinaeus indicus, family Crustaceae) which is a by-product of seafood industries. Chitosan gives toughness to the product and do not allow the DGB particles to wither away when the implant is placed in the defect. Gelatin was used as binder for the preparation of DGB-chitosan composite. The DGB, chitosan and DGB-chitosan-gelatin composite, which were prepared in the laboratory, were analysed for their physicochemical properties by infrared spectroscopy, X-ray diffraction and scanning electron microscopy studies.     

THE CLOSTRIDIUM THERMOCELLUM-CLOSTRIDIUM THERMOSACCHAROLYTICUM ETHANOL PRODUCTION PROCESS: NUTRITIONAL STUDIES AND SCALE-DOWN

The Clostridium thermocellum-Clostridium thermosaccharolyticum mixed culture system has been scaled down into flasks in defined medium MJ with Solka Floe as carbon source. The best saccharolytic culture for use with the cellulolytic, anaerobic thermophile C. thermocellum ATCC 27405 was found to be C. thermosaccharolyticum HG-8 when compared to Clostridium thermo-hydrosulfuricum strain 39E or Thermoanaerobacter ethanolicus ATCC 31937. The defined medium was optimized for a high cellulose concentration by increasing the level of FeSO₄ and by replacing 3-[N-morpholino] propane sulfonic acid (MOPS) buffer by sodium bicarbonate.     

Internet of Things Big Data Security in Cloud via Stream Cipher and Clustering Model

Wireless Personal Communications - Big Data in IoT and Cloud Computing are two important developments over the years, enabling companies to provide efficient and effective IT services. To ensure...     

Development of polyurethane‐based sheets by phase inversion method for therapeutic footwear applications: Synthesis,fabrication, and characterization

It has been proved that polyurethane (PU) foam and viscoelastic PUs are offering better cushioning and shock absorption properties than other materials such as foam rubbers, polyethylene, ethylene vinyl acetate, and polyvinyl chloride which are used currently as insole materials in therapeutic footwear for diabetic and orthopedic patients to “offload” or redistribute high pressure under the foot. The aim of this research work was to prepare viscoelastic materials based on PUs having the highest degree of phase separation that provides for the elastomeric nature of these polymers. Polymer structures with a high concentration of amide groups can be made with the addition of hydrazine or a diacid hydrazide to a diisocyanate. We had prepared various PUs by chain extending the isocyanate‐terminated prepolymer with terepthalic dihydrazide, 5‐hydroxy isothalic dihydrazide, and 1,4‐butanediol. Polymers were developed into sheets by phase inversion method using dimethyl formamide as solvent and water as nonsolvent. To improve the mechanical properties of PU sheets the polymer solution was blended with polyester‐based PU Desmopan 8078 (CPU) in 1 : 1 ratio and the solution mixture was developed into sheet by the same method. Further PU sheets based on only CPU were also developed with various concentrations of PU. The synthesized PU and their blends with CPU were characterized by infrared spectroscopy, differential scanning calorimetry, thermo gravimetric analysis, gel permeation chromatography, and dynamic mechanical analysis. Morphological characteristics of PU sheets were studied by scanning electron microscopy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Role of alkaline nitrites in the corrosion performance of steel in composite cements

The influence of alkaline nitrites on the inhibition of corrosion of steel in binary and ternary cement environments was tested. pH measurements carried out for binary and ternary cement extracts showed that the alkalinity of the cement was not affected by making use of binary and ternary cements. Gravimetric measurements showed that the decrease in the corrosion rate of steel in different systems follows the order: Ternary > (OPC + PSC) > (OPC + PPC) > (PPC + PSC). Potential–time studies indicated that the ability to maintain the passivity of steel in different systems also follows the order as above. Potentiodynamic polarisation studies for steel in binary and ternary cement environments showed the favourable influence of the presence of higher amounts of chlorides. Nitrites of sodium, potassium and calcium act as anodic inhibitors and they compete with chloride ions for the ferrous ions at the steel to form a film of ferric oxide. An efficiency as high as 91% is obtained for the ternary system containing 1% chloride and 0.5% nitrite. The degree of surface coverage showed a maximum value for the ternary system (>0.9) even in the presence of a higher amount of chloride thereby indicating the better performance of the system.     

Chemical composition and in vitro antioxidant studies on Syzygium cumini fruit

Syzygium cumini, widely known as Jamun, is a tropical tree that yields purple ovoid fleshy fruit. Its seed has traditionally been used in India for the treatment of diabetes. Based on the available ethno‐pharmacological knowledge, further studies were extended to understand the chemical composition and antioxidant activities of three anatomically distinct parts of fruit: the pulp, kernel and seed coat. Fruit parts, their corresponding ethanol extracts and residues were evaluated for chemical composition. The alcoholic extract was evaluated for its antioxidant potential against DPPH^?, OH^?, O₂^?? and lipid peroxidation. The whole fruit consisted of 666.0 ± 111.0 g kg^?1 pulp, 290.0 ± 40.0 g kg^?1 kernel and 50.0 ± 15.0 g kg^?1 seed coat. Fresh pulp was rich in carbohydrates, protein and minerals. Total fatty matter was not significant in all three parts of fruit. Detailed mineral analysis showed calcium was abundant in all fruit parts and extracts. Total phenolics, anthocyanins and flavonoid contents of pulp were 3.9 ± 0.5, 1.34 ± 0.2 and 0.07 ± 0.04 g kg^?1, respectively. Kernel and seed coat contained 9.0 ± 0.7 and 8.1 ± 0.8 g kg^?1 total phenolics respectively. Jamun pulp ethanol extract (PEE), kernel ethanol extract (KEE) and seed coat ethanol extract (SCEE) showed a high degree of phenolic enrichment. DPPH radical scavenging activity of the samples and standards in descending order was: gallic acid > quercetin > Trolox > KEE > BHT > SCEE > PEE. Superoxide radical scavenging activity (IC₅₀) of KEE was six times higher (85.0 ± 5.0 µg mL^?1) compared to Trolox (540.0 ± 5.0 µg mL^?1) and three times compared to catechin (296.0 ± 11.0 µg mL^?1). Hydroxyl radical scavenging activity (IC₅₀) of KEE was 151.0 ± 5.0 µg mL^?1 which was comparable with catechin (188.0 ± 6.0 µg mL^?1). Inhibition of lipid peroxidation of the extracts was also studied and their activity against peroxide radicals were lower than that of standard compounds (BHT, 79.0 ± 4.0 µg mL^?1; quercetin, 166.0 ± 13.0 µg mL^?1; Trolox, 175.0 ± 4.0 µg mL^?1; PEE, 342.0 ± 17.0 µg mL^?1; KEE, 202.0 ± 13.0 µg mL^?1 and SCEE, 268.0 ± 13.0 µg mL^?1. Copyright © 2007 Society of Chemical Industry