Effect of temperature and cyclic heating on the structure and strength of glass textolite

The article established the regularities of change of the physicomechanical characteristics and strength of glass textolites in single and repeated thermal loading. It shows that under multiple loading the intense loss of strength of the investigated materials is due to increased porosity on account of the large number of microcracks appearing in the structure. A correlation is obtained between the elastic and strength characteristics and porosity in dependence on the temperature of multiple heating which in the first approximation is described by a polynomial of second degree with respect to temperature, multiplied by the reciprocal of porosity.Translated from Problemy Prochnosti, No. 6, pp. 53–58, June, 1991.     

Converting harmonic oscillations into chaos

A new simple model of a system with chaotic dynamics, based on the equations of bistable systems, is considered. The possibility of converting harmonic signals into chaotic oscillations, which represent intermittent irregular and switching quasi-regular motions, is demonstrated by numerical methods. The mechanism of chaotization is analyzed using the results of numerical calculations.     

Mechanism of displacement of electrolyte solutions from metal surface by inhibited oils

Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 5, 11–13, May, 1991.     

Activation of alphav beta3 integrin on human osteoclast-like cells stimulates adhesion and migration in response to osteopontin

Integrins mediate cell adhesion and can induce different cellular responses, including changes in intracellular pH, changes and oscillation in intracellular free calcium, and protein phosphorylation on tyrosine. During bone resorption, the integrin alphav beta3 regulates adhesion of osteoclasts to bone extracellular matrix proteins, such us osteopontin (Opn). Adhesion via alphav beta3 is followed by osteoclast polarization onto the bone surface and by the onset of bone resorption. To characterize these events at the molecular level, we investigated the state of activation of alphav beta3 on the human osteoclast-like cell line GCT23 using the monoclonal antibody AP5 which binds to and can induce, under low calcium conditions, activated alphav beta3. By flow cytometry, approximately 50% of alphav beta3 on the surface of the osteoclast-like cell line GCT23 was reactive with AP5 and was therefore in the activated state. Incubation with AP5 in the presence of low calcium concentrations increased activated alphav beta3 to 90-100%. Activation of alphav beta3 increased the efficiency of GCT23 adhesion to Opn by 2-fold. Furthermore, haptotactic migration on Opn was also enhanced about 40% compared to control. We propose that changes in the activation state of alphav beta3 may be a regulation point for osteoclasts during bone resorption.     

Composition of lithium aluminoborosilicate glass and abrasive

The properties of glasses of the lithium-aluminoborosilicate system were investigated, namely, the density, spreadability, thermal expansion, and nature of crystallized phases at various temperatures. A crystal-optical analysis was conducted. The glasses were used to prepare abrasive compositions. Their strength properties were studied as a function of the composition of the glass binder and the regime of heat treatment.Translated from Steklo i Keramika, No. 3, pp. 27–30, March, 1996.     

Test of the deterministic conjecture for the instantaneous time phase fluctuations of an oscillator

The fluctuations observed by recording the picosecond pulses of a mode-locked laser with a synchroscan streak camera are due to the laser jitter and to the variations of the zero crossing of the synchronization. By means of a simple model, it is shown that the dispersions measured when the synchronization is generated from the mode-locker oscillator reflect the instantaneous time phase fluctuations of this oscillator. From the study of the experimental recordings with methods of time series analysis it results that the phase noise of the electronic oscillator is consistent with an underlying low-dimensional strange attractor.     

A Study of the Dust Collection Process in the Production of Refractories

An experimental setup for studying filter-assisted dust collection is described. The role of various factors — hydraulic resistance, filtering velocity, dust concentration, pressure drop, efficiency of recovery — in the performance of filters intended for use in the production of refractory materials is considered. The dust removal method was tested under industrial conditions at the Semilukskii Refractory Plant and can be recommended for wider use in different branches of industry.     

Homogeneous Plastic Flow of Fully Amorphous and Partially Crystallized Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5) Bulk Metallic Glass

The homogeneous plastic flow of fully amorphous and partially crystallized Zr(41.2)Ti(13.8)Cu(12.5)Ni(10)Be(22.5) bulk metallic glass (Vitl) has been investigated by compression tests at high temperatures in supercooled liquid region. Experimental results show that at sufficiently low strain rates, the supercooled liquid of the fully amorphous alloy reveals Newtonian flow with a linear relationship between the flow stress and strain rate. As the strain rate is increased, a transition from linear Newtonian to nonlinear flow is detected, which can be explained by the transition state theory. Over the entire strain rate interval investigated, however, only nonlinear flow is present in the partially crystallized alloy, and the flow stress for each strain rate is much higher. It is found that the strain rate-stress relationship for the partially crystaltized alloy at the given temperature of 646 K also obeys the sinh law derived from the transition state theory, similar to that of the initial homogeneous amo