Thermal dependence of low-frequency noise in polysilicon thin film transistors

Thermal dependence of low frequency noise in low temperature (≤ 600 °C) polysilicon thin film transistors is studied in devices biased from weak to moderate inversion and operating in the linear mode. Drain current noise spectral density, measured in the temperature range from 260 K to 310 K, is thermally activated following the Meyer Neldel rule. Analysis of the thermal activation of noise, supported by the theory of trapping/detrapping processes of carriers into oxide traps located close to the interface, leads to the calculation of the deep state interface distribution in function of the Meyer Neldel characteristic energy.     

Cryogenic etching of n-type silicon with p doped walls with the TGZM process through the Al/Si eutectic alloy

The dry etching of n-type silicon with p⁺ doped walls was studied with the cryogenic etching directly after the thermomigration process. The selectivity between n-type silicon and p⁺ doped silicon was first considered in SF₆/O₂ plasma. No selectivity was observed between these two zones. Thereafter, the capacity of the Al/Si eutectic alloy covered with a thin film of Al₂O₃ to play the role of hard mask for the etching was confirmed, always in the case of SF₆/O₂ plasma. Finally, the etching of 50 μm deep trenches through the Al/Si alloy was performed using three different types of process.     

Interferometric characterization of subwavelength lamellar gratings

We propose a new, to our knowledge, method for determining the two main critical parameters of periodic one-dimensional lamellar structures, namely, linewidths and etched depths. The method is simple and requires only two measurements for the phase of the zero-transmitted order under two orthogonal polarizations. It is inspired by the analogy between subwavelength gratings and anisotropic homogeneous thin films. The method is tested with experimental data obtained with a Mach-Zehnder interferometer. Etched depths and linewidths derived from the interferograms and electromagnetic theory are compared with scanning-electron-microscope observations.     

Input impedance of arbitrarily shaped microstrip antennas

Deals with the analysis of arbitrarily shaped microstrip antennas. A powerful and flexible technique is obtained by combining a mixed potential integral equation, successfully used for rectangular patches, with a method of moments, using a division of the patch into triangular cells and overlapping basis functions, defined over cell couples. The resulting computer algorithm is validated by comparing its predictions with the measurements obtained from an equilateral triangular patch     

Co-tunneling enhancement of the electrical response of nanoparticle networks

A co-tunneling charge-transfer process dominates the electrical properties of a nanometer-sized "slice" in a nanoparticle network, which results in universal scaling of the conductance with temperature and bias voltage, as well as enhanced spintronics properties. By designing two large (10 μm) electrodes with short (60 nm) separation, access is obtained to transport dominated by charge transfer involving "nanoslices" made of three nanoparticles only. Magnetic iron oxide nanoparticle networks exhibit a magnetoresistance ratio that is not reachable by tunneling or hopping processes, thereby illustrating how such a size-matched planar device with dominant co-tunneling charge-transfer process is optimal for realizing multifunctional devices with enhanced change of conductance under external stimulus.     

Iron oxide magnetic nanoparticles used as probing agents to study the nanostructure of mixed self-assembled monolayers

Self-assembled monolayers (SAMs) of organic molecules are of exceptional technological importance since they represent a convenient, flexible, and simple system for tuning the chemical and physical properties of surfaces. The fine control of surface properties is directly dependent on the structure of mixed SAMs which is difficult to characterize at the nanoscale with usual techniques such as scanning probe microscopies. In this study, we report on a general method to investigate at the nanoscale the structure of molecular patterns which consist in SAMs of two components. Iron oxide nanoparticles (NPs) have been used as probing agents to study indirectly the structure of mixed SAMs. Mixed SAMs were prepared by the replacement of mercaptododecane (MDD) adsorbed by mercaptoundecanoic acid (MUA) molecules on gold substrates. Therefore, the SAM surface displays both chelating carboxylic terminal groups and non-chelating methylene terminal groups. As NPs have been previously demonstrated to specifically interact with carboxylic acid groups, the increasing density in NPs was correlated with the evolution of the COOH/CH(3) terminal groups ratio. Therefore the structure of mixed SAMs was studied indirectly as well as the kinetic of the replacement reaction and its mechanism. With this aim, we took advantage of the SPR properties of the gold substrate and of the high refractive index of iron oxide nanoparticles to follow their assembling on mixed SAMs as a time resolved study. The high sensitivity and tuning of the SPR signal over a wide range of wavelengths are correlated with the NP density. Furthermore, SEM combined with image analysis has allowed studying the replacement rate of MDD by MUA in SAMs. We took also advantages of the magnetic properties of NPs to evaluate qualitatively the replacement of thiol molecules.     

Improved properties of Ti6Al4V by means of nitrogen high temperature plasma based ion implantation

A stable heating source, providing steady temperatures in the range of 200 to more than 1000 °C, was used to perform high temperature plasma based ion implantation (PBII) on Ti6Al4V. The precise control of the heating of the samples in vacuum while performing PBII is accomplished by means of an efficient electron source, working independent of the conditions of the discharge.The electrons produced by a low work function (2.1 eV) barium, strontium and calcium oxide cathode help with the start-up of the discharge, with the increase of nitrogen ionization and heating of the samples. The large growth of the treated layer thickness was a result of the thermal diffusion of nitrogen, reaching up to 20 μm, in the total process time lasting only 100 min. Experiments were run by setting a constant substrate temperature during PBII to 800 °C but varying the pulse intensity and the duration of the process. Our results showed improvements of the mechanical and tribological properties, and also higher resistance to corrosion of the samples treated by high temperature PBII.     

An E3‐14.7K Peptide that Promotes Microtubules‐Mediated Transport of Plasmid DNA Increases Polyplexes Transfection Efficiency

Chemical vectors as cationic polymers and cationic lipids are promising alternatives to viral vectors for gene therapy. Beside endosome escape and nuclear import, plasmid DNA (pDNA) migration in the cytosol toward the nuclear envelope is also regarded as a limiting step for efficient DNA transfection with non‐viral vectors. Here, the interaction between E3‐14.7K and FIP‐1 to favor migration of pDNA along microtubules is exploited. E3‐14.7K is an early protein of human adenoviruses that interacts via FIP‐1 (Fourteen.7K Interacting Protein 1) protein with the light‐chain components of the human microtubule motor protein dynein (TCTEL1). This peptide is conjugated with pDNA and mediates interaction of pDNA in vitro with isolated microtubules as well as with microtubules in cellulo. Videomicroscopy and tracking treatment of images clearly demonstrate that P79‐98/pDNA conjugate exhibits a linear transport with large amplitude along microtubules upon 2 h transfection with polyplexes whereas control pDNA conjugate exhibits small non‐directional movements in the cytoplasm. Remarkably, P79‐98/peGFP polyplexes enhance by a factor 2.5 (up to 76%) the number of transfected cells. The results demonstrate, for the first time, that the transfection efficiency of polyplexes can be drastically increased when the microtubules migration of pDNA is facilitated by a peptide allowing pDNA docking to TCTEL1. This is a real breakthrough in the non viral gene delivery field that opens hope to build artificial viruses.     

Prognostic value of steroid receptors after long-term follow-up of 2257 operable breast cancers

The prognostic value of oestrogen receptor (ER) and progesterone receptor (PR) was estimated through a multicentric study of 2257 operable breast cancer patients followed up for a median of 8.5 years. None of the patients had received adjuvant therapy. The series included 33.3% stage I patients, 57.1% stage II, 5.7% stage IIIa and 2.4% stage IIIb. At the end point of the study 589 metastases and 537 deaths from cancer were recorded. Receptor measurements were performed by radiolgand assay according to a uniform protocol. A total of 68.8% of the tumous were ER positive and 54.0% PR positive ( > or = 10 fmol mg-1 cytosol protein). In univariate analysis, ER and PR status (positive/negative) were of prognostic value (P < 0.001) for the disease-free interval (DFI), the metastases-free interval (MFI) and the overall survival (OS). The OS of the patients after a first metastasis was also significantly different between ER-positive and -negative tumours (P < 0.001). In multivariate analysis (Cox proportional hazard model, 1665 patients), only the ER status showed a significant difference (P < 0.01) between positive and negative groups regarding the DFI, MFI and OS. By using Cox non-proportional, time-dependent models, we show that the predictive value of ER status of the primary tumour decreases by approximately 20% per year, losing its significance after 8 years of follow-up. Overall, when compared with TNM and histological grading, ER and PR status have a low prognostic value, their major interest remaining solely in the domain of therapeutic decision.