Low temperature crystallographic data on Kevlar 49 fibres

Using X-ray diffraction data, the behaviour of Kevlar 49 fibres at low temperatures, up to –100°C, has been analysed. During cooling, the basal plane of the monoclinic unit cell shrinks whereas the c- (unique, chain axis) length is not significantly affected. In contrast, in the return heating cycle to ambient temperature, the basal plane expands and contraction occurs along the chain direction. The unit cell registers a reduction in volume in both the cooling and heating cycles. Conspicuously, after a cycle of cooling and heating, the unit cell does not return to its initial volume.     

Phase Transformation Introduced by Mechanical and Chemical Surface Preparations of Tetragonal Zirconia Polycrystals

Cutting of Y₂O₃-doped TZP rods by a low-speed diamond saw introduces an unidentified, metastable phase X (x -ZrO₂) coexisting with the tetragonal ( t -ZrO₂) and the monoclinic ( m -ZrO₂) phases initially present in the sample. Further mechanical deformation of the cut surface by indentation or polishing sustains the x -ZrO₂. Chemical etching removes the x -ZrO₂ and increases the m -ZrO₂content.     

A study on development of cognitive support features in recent ontology visualization tools

Ontologies are currently emerging as representation techniques for overlapping compatibility context domains. The continuing need for more effective information retrieval has lead to the creation of the notions of the semantic web and personalized information management. Subsequently, the need for effective ontology visualization for design, management and browsing has arisen. Several ontology visualization tools have come out to strengthen the users’ cognitive support. The primary goal of this paper is to present a survey on recently implemented ontology visualization tools and their contributions in the enrichment of users’ cognitive support. This work also presents the preliminary results of an evaluation of three visualization tools to determine the suitability of each method for end user applications where ontologies are used as browsing aids.     

Bulk and interfacial physical properties of aqueous solutions of sodium lauryl sulphate and lauryl alcohol with air and benzene system: Part I: Aqueous solutions of sodium lauryl sulphate

Experimental measurements were made of the pH, density, bulk viscosity and electrical conductivity of aqueous solutions of sodium lauryl sulphate for a wide range of concentrations at 25°C. Also, the time-dependent interfacial tension data of this system with mutually saturated benzene phases are reported. Comparison of these data with literature values shows fair agreement in the majority of the cases and further reveals the lack of data in the earlier investigations below the critical micelle concentration of sodium lauryl sulphate in water. A detailed compilation of the data, reported in the literature since 1937, of the pH, density, bulk viscosity, electrical conductivity, surface tension, interfacial tension with benzene, surface excess concentration, surface shear viscosity, diffusivity and critical micelle concentration of the sodium lauryl sulphate system is given. The importance of this anionic surfactant system together with the various factors which influence the physical properties is examined.     

Product beamforming and nested array in tandem for enhanced sonar performance

Multidimensional Systems and Signal Processing - High-performance sonar systems mostly combine a large sensor array and an efficient beamformer for enhancing the overall detection capabilities and...     

Evaluation of Crop Models for Simulating and Optimizing Deficit Irrigation Systems in Arid and Semi-arid Countries Under Climate Variability

The variability of fresh water availability in arid and semi-arid countries poses a serious challenge to farmers to cope with when depending on irrigation for crop growing. This has shifted the focus onto improving irrigation management and water productivity (WP) through controlled deficit irrigation (DI). DI can be conceived as a strategy to deal with these challenges but more knowledge on risks and chances of this strategy is urgently needed. The availability of simulation models that can reliably predict crop yield under the influence of soil, atmosphere, irrigation, and agricultural management practices is a prerequisite for deriving reliable and effective deficit irrigation strategies. In this context, this article discusses the performance of the crop models CropWat, PILOTE, Daisy, and APSIM when being part of a stochastic simulation-based approach to improve WP by focusing primarily on the impact of climate variability. The stochastic framework consists of: (i) a weather generator for simulating regional impacts of climate variability; (ii) a tailor-made evolutionary optimization algorithm for optimal irrigation scheduling with limited water supply; and (iii) the above mentioned models for simulating water transport and crop growth in a sound manner. The results present stochastic crop water production functions (SCWPFs) that can be used as basic tools for assessing the impact on the risk for the potential yield due to water stress and climate variability. Example simulations from India, Malawi, France and Oman are presented and the suitability of these crop models to be employed in a framework for optimizing WP is evaluated.     

Thermal and structural properties of spray pyrolysed CdS thin film

Using photo acoustic technique, the thermal properties of CdS thin films grown by spray pyrolysis are measured. Thermal diffusivity and conductivity in these films decrease at least two orders compared with bulk. These results are compared with our study on nano CdS and the other available literature. The comparison is good. The dependence of thermal diffusivity on the thickness of the layer or the size of the particles on the glass substrate are analysed from the present measurement and discussed. The dependence of thermal diffusivity on the thickness of the layer on the glass substrate is discussed.     

Effect of the surface roughness of conducting polypyrrole thin-film electrodes on the electrocatalytic reduction of nitrobenzene

Conducting polypyrrole (PPy) thin-film electrodes were prepared by the electropolymerization of pyrrole on gold-coated glass plates. Films of various roughnesses were obtained by the variation of the scan rates during electropolymerization. These thin films were modified by doping with 6mM of the dopant NiCl₂. The surface morphology of the films was studied by scanning electron microscopy and atomic force microscopy (AFM), which suggested films prepared with a high scan rate were rougher in nature than the films produced with a low scan rate. The electrocatalytic reduction of nitrobenzene was carried out with these electrodes with the cyclic voltammetry technique in acetonitrile containing 0.1M HClO₄ as a supporting electrolyte. The various results obtained show that the conducting PPy thin-film electrodes were catalytically active toward the electroreduction process. The modified PPy film electrodes doped with NiCl₂ were more active toward nitrobenzene electroreduction than the PPy film alone. The results indicate that the roughness of the films played a very important role in determining their catalytic activity. The PPy films that were more rough in nature were catalytically more active than the smooth films; this may have been due to the availability of more reactive sites in the case of rough films. The apparent diffusion coefficients of the PPy film electrodes were also calculated. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Polyaniline–13X zeolite composite‐supported platinum electrocatalysts for direct methanol fuel cell applications

We successfully synthesized 13X zeolite using a hydrothermal method. Then, composites of polyaniline (PANI) with 13X zeolite and PANI–13X with platinum were prepared by chemical oxidative polymerization and chemical reduction, respectively. Field emission scanning electron microscopy, X‐ray diffraction, Raman spectroscopy and Brunauer–Emmett–Teller techniques were used to characterize the PANI–Pt and PANI–Pt–13X composites. Further, the electrocatalytic activity towards methanol oxidation of the synthesized catalysts was explored using cyclic voltammetry in 1 mol L^?1 CH₃OH + 0.5 mol L^?1 H₂SO₄ solution. From the obtained results, PANI–Pt–13X shows superior performance compared to PANI–Pt towards methanol oxidation and electrical conductivity. Hence, the 13X zeolite‐incorporated PANI–Pt composite could be an efficient catalyst for direct methanol fuel cell applications. © 2019 Society of Chemical Industry