The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy

Metallurgical and Materials Transactions A - The effect of 0.03 and 0.08 at. pct Fe additions on the formation of secondary phases in an Al–1.1Mg–0.5Cu–0.3Si at. pct alloy was...     

Interfacing remote transaction services using UPnP

Transaction execution in mobile environments needs to be flexible, not only to support typical mobile computing characteristics, like movement, disconnections and limited resources, but also to support the variety of transactional properties that might be required by different applications. Existing models for mobile transaction management solve different aspects of transaction execution, but are not flexible enough to solve all required aspects. Instead of designing a new transaction model, we propose a middleware (MobileTSe) which utilize existing transaction models to handle various requirements for mobile transaction execution. This paper presents an approach for flexible transaction processing in mobile applications, and describes how MobileTSe makes transaction services with different properties available on mobile units. We suggest a solution with transaction service discovery and control using UPnP.     

一种多视点视频系统中随机访问的解码路径计算新方法

在多视点视频系统中,用户端的随机访问性能是表征交互能力的一个重要指标。当用户进行随机访问时,需要快速确定相应的解码路径,以快速有效地获得相应视点与时刻的图像帧。针对H.264多视点视频系统中随机访问效率不高这个情况,分析了传统多视点视频系统随机访问解码路径的计算方法,讨论了其中存在的非最优解码路径问题,提出帧等级矩阵的概念。然后,提出针对HBP（hierarchical B pictures) 这种具有代表性的多视点视频编码预测结构的解码路径计算快速算法。实验结果表明,所提算法能获得较优解码路径,从而有效地提高随机访问性能,降低解码复杂度。     

Process yields for laser repair of aged, stiction-failed, MEMSdevices

Stiction, the adhesion of micromachined components to each other or the substrate, decreases production yields and operational lifetimes for MEMS devices. A recent study demonstrated the feasibility of using a Nd:YAG, 1063 nm laser to repair 2 μm thick polycrystalline silicon microcantilevers with lengths up to 1000 μm which had adhered to the substrate. This investigation examines the influence of sample age at the time of laser irradiation on the repair of stiction-failed MEMS structures. The operating conditions for the 1064 nm, Nd:YAG laser included a fluence of 70 mJ/cm², a repetition rate of 20 Hz, a pulse duration of 20 ns, and an exposure time of 60 s. For samples irradiated on the same day of release, repair yields were 100% for beams up to 500 μm in length. For 1000 μm long beams, the 10- and 30-μm-wide cantilevers had same-day repair yields of 56% and 71%, respectively. The experimental results show that increasing the amount of time the microstructures are adhered to the substrate before laser irradiation decreases the ability to repair stiction-failed devices with delays of longer than 1 month resulting in a decreased repair yield     

Fungal products. Part XVII. Microbiological hydroxylation of gibberellin A9 and its methyl ester

Angiotensin II (A II) and analogues were tested for their ability to restore electrical and mechanical activity to cardiac muscle preparations in which the fast Na+ channels had been inactivated by partial depolarization (22-27 mM K+) or by tetrodotoxin (TTX). The partially depolarized or TTX-blocked preparations were chosen because under these conditions electrical and mechanical responses are primarily Ca2+ -dependent. In depolarized rabbit right atria, A II restored spontaneous mechanical and electrical activity (measured by both intracellular and extracellular recording techniques). The frequency of action potential discharge was concentration-dependent; the threshold concentration of A II was 10(-10) M, the ED50 was 8 X 10(-9) M, and the maximum effect was observed at 5 X 10(-8) M. In contrast, depolarized guinea pig atria were insensitive to A II, Sar1-angiotensin II, and des-Asp1-angiotensin II, even at concentrations as high as 10(-5) M. Rabbit papillary muscle (TTX-blocked), embryonic (18-day) chick heart (partially depolarized) and chick heart reaggregates (TTX-blocked) responded similarly to rabbit atria in that A II (9.6 X 10(-7) M) restored both electrical and mechanical activity. We found that in these preparations the action of A II was unaffected by propranolol (5.0 X 10(-6) M to 5.0 X 10(-5) M) but was blocked by Mn2+ (10(-3) M), D-600 (1 X 10(-7) g/ml) and the specific A II antagonists Sar1-Ala8-angiotensin II (P-113) (5.0 X 10(-5) M) and Sar1-Ile8-angiotensin II (5.28 X 10(-5) M). We conclude that the positive inotropic effect of A II on the myocardium is due to its ability to increase transmembrane ion movements in or through the cell membrane. The ability of Mn2+ and D-600 to block this effect suggests that this ion movement is via the so-called "slow channels."     

Effectiveness of Rinse Water during In‐Place Cleaning of Stainless Steel Pipe Lines

The 1st step of any Clean‐In‐Place (CIP) operation is a prerinse with water. The purpose of this step is to remove the bulk of food material remaining in the processing lines after production period has ended. It is known that this prerinse step can be a very water intensive process. The objective of this investigation was to measure the influence of CIP parameters (flow characteristics, water temperature, and contact time) on the effectiveness of prerinse water in removing dairy‐based deposits from stainless steel pipe surfaces and to compare the rinse effectiveness of unused to reused rinse water. A pilot‐scale CIP system was operated to rinse 304 stainless steel pipe sections of 3 different pipe diameters. The velocity of the rinse water was varied from 0.72 to 2.26 m/s. The rinse water temperatures were 22 °C, 45 °C, and 67 °C. The contact times between rinse water and deposited film were 20 and 60 s. Rinse effectiveness was expressed as the ratio of the amount of protein residue removed from the pipe surface during rinsing, as compared to the magnitude of the initial protein deposit. The rinse effectiveness varied from 73.1% to 94.9% for the range of the CIP parameters investigated. High velocities of rinse water provided a higher level of rinse effectiveness. Increasing the rinse water temperature from 23 °C to 45 °C improved rinse effectiveness significantly (P < 0.05). This impact was not significant when the water temperature was increased from 45 °C to 67 °C and at higher rinse water velocities. Similarly, longer contact time provided less improvement in rinse effectiveness at higher temperatures and velocities as compared to lower temperatures and velocities. There were no significant differences in rinse effectiveness when comparing reused and unused water (normal tap water) within the range of velocities evaluated.     

Using the community health assessment to screen for continued driving

This project used the interRAI based, community health assessment (CHA) to develop a model for identifying current elder drivers whose driving behavior should be reviewed. The assessments were completed by independent housing sites in COLLAGE, a non-profit, national senior housing consortium. Secondary analysis of data drawn from older adults in COLLAGE sites in the United States was conducted using a baseline assessment with 8042 subjects and an annual follow-up assessment with 3840 subjects. Logistic regression was used to develop a Driving Review Index (DRI) based on the most useful items from among the many measures available in the CHA assessment. Thirteen items were identified by the logistic regression to predict drivers whose driving behavior was questioned by others. In particular, three variables reference compromised decision-making abilities: general daily decisions, a recent decline in ability to make daily decisions, and ability to manage medications. Two additional measures assess cognitive status: short-term memory problem and a diagnosis of non-Alzheimers dementia. Functional measures reflect restrictions and general frailty, including receiving help in transportation, use of a locomotion appliance, having an unsteady gait, fatigue, and not going out on most days. The final three clinical measures reflect compromised vision, little interest or pleasure in things normally enjoyed, and diarrhea. The DRI focuses the review process on drivers with multiple cognitive and functional problems, including a significant segment of potentially troubled drivers who had not yet been publicly identified by others. There is a need for simple and quickly identified screening tools to identify those older adults whose driving should be reviewed. The DRI, based on the interRAI CHA, fills this void. Assessment at the individual level needs to be part of the backdrop of science as society seeks to target policy to identify high risk drivers instead of simply age-based testing.     

Relative dominance of physical versus chemical effects on the transport of adhesion-deficient bacteria in intact cores from South Oyster, Virginia

Bacterial transport experiments were conducted using intact sediment cores collected from sites on the Delmarva Peninsula near South Oyster, VA, to delineate the relative importance of physical and chemical heterogeneity in controlling transport of an adhesion-deficient bacterial strain. Electron microscopy revealed that the sediments consisted of quartz and feldspar with a variable amount of clay and iron and aluminum hydroxide coatings on the grains. A nonmotile, gram-negative indigenous groundwater strain, designated as Comamonas sp. DA001, was injected into the cores along with a conservative tracer bromide (Br). DA001 cells were 1.2 x 0.6 microm in size with a hydrophilic surface and a slightly negative surface charge. Bacterial breakthrough preceded that of Br. This differential advection phenomenon can be accounted for by reduction of the effective porosity for the bacteria relative to Br. The distribution of cells remaining in the core as determined by scintillation counting and phosphor imaging techniques was variable, ranging from nearly uniform concentrations throughout the core to exponentially decreasing concentrations with distance from the point of injection. The fraction of bacterial retention in the core was positively correlated with the abundance of the metal hydroxides and negatively correlated with grain size. Because grain size was inversely correlated with the abundance of the metal hydroxide coatings, it was necessary to separate the effects of grain size and mineralogy. The fraction of the bacterial retention accounting for the effect of grain size, the collision efficiency, exhibited no correlation with the abundance of the metal hydroxides, indicating that the bacterial retention was primarily controlled by grain size. Reasons for the lack of influence of mineralogy on bacterial transport include (i) the slightly negatively charged bacterial surfaces; (ii) an insufficient heterogeneity of sediment surface properties; and (iii) the masking of the positive charge of the metal hydroxide surfaces by adsorbed organic carbon (up to 1180 ppm). This study demonstrates that the laboratory-based bacterial transport experiments are effective in delineating physical versus chemical controlling factors and provide an important link to field-based bacterial transport studies.     

Oxygen isotopic measurements by secondary ion mass spectrometry in uranium oxide microparticles: a nuclear forensic diagnostic

To exploit oxygen isotopic measurement by SIMS as a diagnostic tool in nuclear forensics, the magnitude and reproducibility of 0-isotope instrumental mass discrimination for O-isotope standards in the SIMS laboratory at the Institute for Transuranium Elements has been evaluated. Tests for matrix-dependent discrimination effects on three different O-isotope standards with substantially different matrix compositions have been performed. The results were checked by an interlaboratory comparison of O-isotope discrimination with those obtained in the SIMS laboratory at the Lawrence Livermore National Laboratory on two standards. The results from the two laboratories are in very good agreement, indicating statistically indistinguishable instrumental mass discrimination factors for 180/160 ratios on the Cameca 6f and 3f, when the analyses are performed under the experimental conditions described. The 2sigma(mean) uncertainties of these factors are in the range of 0.3-0.9%. In accordance with the tested methodology, 0-isotope compositions were measured in three particulate uranium oxide samples of nuclear forensics interest.