Different glazing systems and their impact on human thermal comfort—Indian scenario

In the present communication, fifteen different glazing systems ranging from 3 mm single glazed clear glass to double glazed with low-e and solar control coating, have been analysed in terms of their human thermal comfort impact. Thermal comfort is measured in term of PMV (predicted mean vote) and PPD (predicted percentage of dissatisfied). Study encompasses all the six climatic zones of India. By using OPTICS 5.0 and WINDOW 5.0, U-values, solar heat gain coefficient, inside glazing surface temperatures and inside solar radiation have been computed. Depending upon different climatic zones, six sets of different design conditions, in terms of ambient temperatures, solar radiation and wind velocity, have been chosen. Typical values of metabolic rate and clothing insulation taken are 1.2 met and 0.5 clo for summer and 1.0 met and 1.0 clo for winter, respectively. Inside room air velocity is taken as 0.15 m s⁻¹ round the year. Room temperature is taken as 20 °C in winter and 25 °C in summer. It is found that for cold station (e.g. Leh) all glazings except solar control glazings, ensure thermal comfort and total PPD is less than 10% (|PMV|?0.5). For warm and hot climates, solar control glazings are thermally suitable. Results for winter night of Delhi shows that all the 15 glazings are inadequate for thermal comfort and PPD, due to cold feeling, varies between 27% and 33% approximately.     

Pressure Drop Studies on Flow of Viscoelastic Fluid Through a Packed Bed

In the present study, pressure drop-flow rate behavior for the flow of viscoelastic fluid through porous media has been investigated. Aqueous solutions of polyacrylamide (PAM) and water in the concentration range of 0.02 to 0.1% wt/vol were used to elucidate the effect of fluid elasticity on bed pressure drop. Based on the observed data, the existing pore model was extended to predict the bed pressure drop for viscoelastic fluid flowing through a porous media. A statistical comparison between the existing models and the present model was made. The proposed correlation based on modified pore model predicts the data well to within a reasonable accuracy of ±10% with arithmetic relative error (%ARE) and mean relative quadratic error (MRQE) of 8.3% and 0.122, respectively.     

Growth of a liquid film accompanied by a zero-order reaction

The growth of a thin liquid film surrounded by gas pocket(s), undergoing absorption with a zero-order chemical reaction, has been simulated by an apt mathematical model in order to study the influence of various parameters involved. The solution has been obtained semi analytically using Goodman's integral method and solving the resulting differential equation by a fourth-order Runge-Kutta numerical integration algorithm. The computations reveal the strong dependence of film growth on reaction rate, diffusivity, and molar volume whereas the effect of gas-pocket volume and initial film thickness are moderate.     

Measurement of focal length with phase-shifting Talbot interferometry

Phase-shifting interferometry with a Fourier fringe analysis technique is implemented to analyze Talbot interferometric fringes and to evaluate the focal length of a lens. A four-step algorithm is used to obtain the phase map of the lens. The slope of the phase map is related to the focal length, and it is from this relationship that we evaluate the focal length. Experimental results are presented. Our experimental study suggests that phase-shifting Talbot interferometry combined with a Fourier fringe analysis technique can be advantageously used to improve the accuracy of measurement.     

Spatial phase shifting for pure in-plane displacement and displacement-derivative measurements in electronic speckle pattern interferometry (ESPI)

Hitherto no method, to our knowledge, was known to incorporate spatial phase shifting for the measurement of pure in-plane displacements. We demonstrate that the modified Duffy two-aperture configuration [Opt. Lett. 22, 1958 (1996)], which is sensitive to only the in-plane displacement component and offers increased sensitivity, lends itself to measurement with spatial phase shifting. The configuration can also be used for obtaining displacement derivatives by the introduction of shear with the tilt of a mirror.     

Observation of self-diffraction effect in acid blue 7 dye soaked gelatin films

Abstract

Permanent self-diffraction gratings are formed in red sensitive Acid blue 7 dye soaked gelatin films under illumination of an interference pattern by two linearly polarized beams from a He-Ne laser at 632.8 nm. Growth of the self-diffraction grating is monitored by measuring intensities of various diffraction orders. Systematic studies are carried out to investigate the influence of various parameters involved in diffraction efficiency of the grating such as time of exposure, concentration of dye in the gelatin-coated plate, intensity of interfering beams and intensity ratio of interfering beams. Efficient gratings with ten diffracted orders are formed. Several interesting observations are made by blocking one of the writing beams and an attempt is made to analyse these results.     

Modeling of Cadmium Removal from Domestic Wastewater in Constructed Wetlands Using STELLA Simulation Program

A mathematical model was developed to simulate cadmium removal from wastewater in free water surface (FWS) and subsurface flow (SF) constructed wetlands using STELLA simulation program. The model simulated the accumulation of cadmium in soil (Cds), uptake by plants (Cdp), and residual concentration in effluent (Cdww_eff). The model was calibrated using one-half of the experimental data for the adjustment of the coefficients and the remaining data for model verification. The comparison of simulated and experimental values of Cds, Cdp, and Cdww_eff showed good agreement. The results indicated that the developed mathematical model could be useful for predicting the fate of cadmium when treating domestic effluents in constructed wetlands.     

Amplitude checker grating from one-dimensional Ronchi grating and its application to array generation

The Ronchi grating is well known for its many applications in areas such as spectroscopy, grating interferometry, and Talbot interferometry. On the other hand, the checker grating has attracted very little attention. A checker grating also self-images at equidistant planes; the separation between these planes is a quarter of the Talbot distance of a Ronchi grating of the same period. To understand this and several other features, a transition from Ronchi grating (a one-dimensional grating) to checker grating (a two-dimensional grating) has been both theoretically and experimentally studied and results are presented. Because the checker grating self-images closer to the grating and its transmittance is higher than that of a Ronchi grating, the use of its self-image planes for array generation is also emphasized.