Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Enterococcal bacteremia in a medical center

BACKGROUND: The enterococci have become important nosocomial pathogens. They can cause multiple site infections and enterococcal bacteremia becomes more frequently associated with a high mortality rate. Previous studies of enterococcal bacteremia showed a variety of results. To establish the significance and importance of enterococci as nosocomial pathogens in this hospital, to characterize their clinical pictures and to search for the risk factors for mortality, this retrospective study was performed. METHODS: There were 208 cases of enterococcal bacteremia which occurred from 1988 to 1992. Twenty-seven cases had no medical charts, dismissing possibility of evaluation. Finally, 181 cases of enterococcal bacteremia were analysed. RESULTS: One hundred and eighteen episodes were nosocomial infections. Polymicrobial bacteremia occurred in 68.5% of the patients and the most common co-isolate was Pseudomonas aeruginosa. Those patients (78.5%) with underlying diseases and malignancies were the most common underlying problems. The portal of entry could be found in 69.6 percent of patients, with the gastrointestinal tract the most common sources. Antimicrobial susceptibility testing showed high gentamicin resistance rate (89.5%), and ampicillin still had about 80 percent sensitivity rate. The group who received specific antibiotic therapy for enterococcus showed lower mortality (36.4% versus 47.6%). Only one case had infective endocarditis. Forty-nine patients suffered from septic shock, the cause of 30 deaths. Totally 75 patients died during hospitalization. Besides sepsis, another major cause of death was their underlying diseases itself. CONCLUSIONS: Enterococci have no doubt become important nosocomial pathogens and enterococcal bacteremia were associated with high mortality, especially in elderly patients with underlying diseases such as malignancy or diabetes. When clinically dealing with sepsis from the gastrointestinal or biliary tract, especially when previous cephalosporins therapy showed no response, the possibility of enterococcal bacteremia should always be considered.     

Anti-D in a D-positive renal transplant patient

PURPOSE: We report a case of postoperative reparalysis in the recovery room, following nebulized epinephrine. The patient was pharmacologically reversed with edrophonium after paralysis with rocuronium. CLINICAL FINDINGS: A 12-yr-old girl developed postoperative reparalysis following the intraoperative administration of rocuronium. A total of 0.92 mg.kg-1 rocuronium was administered. After surgery, pharmacological reversal was achieved with 20 mg edrophonium with 0.15 mg atropine sulfate iv 35 min after the last administration of rocuronium. Muscular relaxation was monitored using an ulnar peripheral nerve stimulator (PNS). After reversal, a full train-of-four and sustained tetanus at 50 Hz were present. In the recovery room, following nebulized epinephrine, the patient became apneic. The patient was paralyzed and an ulnar PNS demonstrated only one faint twitch. The paralysis was reversed with 1.5 mg neostigmine with 0.3 mg glycopyrrolate. CONCLUSION: Postoperative reparalysis following rocuronium may be a cause of postoperative respiratory distress. The definitive diagnosis is made using PNS and observing the response to pharmacological reversal. Nebulized epinephrine may have a previously undescribed role in the development of postoperative reparalysis.     

点阴极电场辅助阳极连接中的紧密接触面积和电流

用等效电路的方法研究了点阴极情况下的电场辅助阳极连接效应，计算了连接电流，连接孕育期和紧密接触面积，本文结果表明，连接初期电流迅速衰减，随后缓慢变小，直至某一稳定值，孕育期随温度上升指数下降，连接温度高时，孕育期将难以观察到；待连接表面之间紧密接触面积随时间延长而非线性扩展，紧密接触区域增大时，其边界向外推进速度渐小，而接触面积增加渐快。     

Using Web resources to construct multilingual medical thesaurus for cross-language medical information retrieval

Due to the language barrier, non-English users are unable to retrieve the most updated medical information from the U.S. authoritative medical websites, such as PubMed and MedlinePlus. However, currently, there is no any cross-language medical information retrieval (CLMIR) system that can help Chinese-speaking consumers cross the language barrier in finding useful English medical information. A few CLMIR systems utilize MeSH (Medical Subject Headings) to help overcome the language barrier. Unfortunately, the traditional Chinese version of MeSH is currently unavailable.In this paper, we employ a semi-automatic term translation method to construct a Chinese–English MeSH by exploiting abundant multilingual Web resources, including Web anchor texts and search–result pages. Through this method, we have developed a Chinese–English Mesh Compilation System to assist knowledge engineers in compiling a Chinese–English medical thesaurus with more than 19,000 entries. Furthermore, this thesaurus has been used to develop a prototypical system for cross-language medical information retrieval, MMODE, which can help consumers retrieve top-quality English medical information using Chinese terms.