Effect of cellulose acetate/cellulose triacetate ratio on reverse osmosis blend membrane performance

Surface functionalization and modification including the grafting process are effective approaches to improve and enhance the reverse osmosis (RO) membrane performance. This work is aimed to synthesize grafted/crosslinked cellulose acetate (CA)/cellulose triacetate (CTA) blend RO membranes using N-isopropylacrylamide (N-IPAAm) as a monomer and N,N-methylene bisacrylamide (MBAAm) as a crosslinker. The morphology of these membranes was analyzed by scanning electron microscopy and their surface roughness was characterized by atomic force microscopy. The performance of these membranes was evaluated through measuring two major parameters of salt rejection and water flux using RO unit at variable operating pressures. It was noted that the surface average roughness obviously decreased from 148 nm for the pure CA/CTA blend membrane with 2.5% CTA to 110 nm and 87 nm for the grafted N-IPAAm and grafted/crosslinked N-IPAAM/MBAAm/CA/CTA-RO membranes, respectively. Moreover, the contact angle decreased from 51.98° to 47.6° and 43.8° after the grafting and crosslinking process. The salt rejection of the grafted CA/CTA-RO membrane by 0.1% N-IPAAm produced the highest value of 98.12% and the water flux was 3.29 L/m²h at 10 bar.     

Reflectarray research at the communications research centre Canada

It has been a decade since a research program began on reflectarray technology at the Communications Research Centre Canada (CRC). This endeavor has demonstrated the advantages and shortcomings of this technology, the issues that ought to be addressed, and future opportunities. This paper summarizes the outcome of this research in the context of projects that have been carried out, and the resulting insight into reflectarray technology. Design methodology, fabrication process, and measurements results will be briefly discussed for each particular development.     

Code generation for a family of executable modelling notations

We are investigating semantically configurable model-driven engineering (MDE). The goal of this work is a modelling environment that supports flexible, configurable modelling notations, in which specifiers can configure the semantics of notations to suit their needs and yet still have access to the types of analysis tools and code generators normally associated with MDE. In this paper, we describe semantically configurable code generation for a family of behavioural modelling notations. The family includes variants of statecharts, process algebras, Petri Nets, and SDL88. The semantics of this family is defined using template semantics, which is a parameterized structured operational semantics in which parameters represent semantic variation points. A specific notation is derived by instantiating the family’s template semantics with parameter values that specify semantic choices. We have developed a code-generator generator (CGG) that creates a suitable Java code generator for a subset of derivable modelling notations. Our prototype CGG supports 26 semantics parameters, 89 parameter values, and 7 composition operators. As a result, we are able to produce code generators for a sizable family of modelling notations, though at present the performance of our generated code is about an order of magnitude slower than that produced by commercial-grade generators.     

Hydrodesulfurization of model diesel using Pt/Al2O3 catalysts prepared by supercritical deposition

Pt/Al₂O₃ catalysts with Pt loadings ranging from 0.5 to 11 wt.% were synthesized by supercritical carbon dioxide (scCO₂) deposition method. Transmission electron microscopy (TEM) images showed that the synthesized catalysts contained small Pt nanoparticles (1–4 nm in diameter) with a narrow size distribution, no observable agglomeration, and uniformly dispersed on the alumina support. The catalysts were found to be active for hydrodesulfurization of dibenzothiophene (DBT) dissolved in n-hexadecane (n-HD) without sulfiding the metal phase. The reaction proceeded only via the direct hydrogenolysis route in the temperature range 310–400 °C and at atmospheric pressure. The activity increased with increasing the metal loading. Increasing [H₂]₀/[DBT]₀ by either increasing [H₂]₀ or decreasing [DBT]₀, increased the DBT conversion. At a fixed weight hourly space velocity and feed concentration, conversion did not increase with increasing temperature beyond 330 °C. The presence of toluene inhibited the catalyst activity presumably due to competitive adsorption between DBT and toluene. Under the operating conditions, the reaction was far from equilibrium.     

Effect of substrate bias on the properties of plasma deposited organosilicone (pp-HMDSN) thin films

Organosilicone thin films have been deposited by plasma polymerization (pp) in a plasma enhanced chemical vapor deposition (PECVD) system using hexamethyldisilazane (HMDSN:C6H19Si2N) as a monomer precursor, at different biases of the stainless-steel substrate holder. The substrate bias affected film thickness, surface morphology, chemical composition and photoluminescence (PL) emission. For a negatively biased substrate, it is found that the film thickness is the minimum, while the porosity and PL emission are the maximum. For a positively biased substrate, the thickness and the ratio of Si/N are the maximum which correspond to a blue shift of the PL emission in comparison with the case of non-biased grounded substrate. In addition, the characterization of the plasma using a single cylindrical Langmuir probe has been performed to obtain information about both the electron density and the positive ion energy, where it can be concluded that the ion energy plays a major role in determining film thickness.     

Polyaniline/akaganéite nanocomposite for detoxification of noxious Cr(VI) from aquatic environment

In this work, a removal of toxic hexavalent chromium Cr(VI) ion from aqueous solution was investigated and studied using nanocomposite of polyaniline (PANI) and akaganéite nanoparticles (NP). HCl doped PANI, and akaganéite NPs were prepared by chemical oxidative polymerization and co-precipitation techniques, respectively. The synthesized materials were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), and high-resolution transmission electron microscope (HRTEM). It was indicated that the formed oxide NPs were consisted of akaganéite as dominant phase plus minor phases of hematite, magnetite, and/or maghemite. HRTEM images of the prepared nanocomposite demonstrated that the phases of oxide NPs embedded in the nanocomposite had the same crystallinity and morphology of pristine oxide NPs. It was found that size of nanocomposite particles has diameter ranged from 8.95 to 16.21 nm. Cr(VI) removals in a wide pH range from 2 to 9 were appropriated for prepared nanocomposite. The nanocomposite has demonstrated high removal percentage of 99.2 % and removal capacity of 17.36 mg/g for 7.0 mg/L Cr(VI) polluted aqueous solution at pH 2.0 for 5-min contact time. The synthesized nanocomposite was applied to remove Cr(VI) from a leather tanning wastewater sample with efficiency of 93.4 %.     

The Plasminogen–Activator Plasmin System in Physiological and Pathophysiological Angiogenesis

Angiogenesis is a process associated with the migration and proliferation of endothelial cells (EC) to form new blood vessels. It is involved in various physiological and pathophysiological conditions and is controlled by a wide range of proangiogenic and antiangiogenic molecules. The plasminogen activator–plasmin system plays a major role in the extracellular matrix remodeling process necessary for angiogenesis. Urokinase/tissue-type plasminogen activators (uPA/tPA) convert plasminogen into the active enzyme plasmin, which in turn activates matrix metalloproteinases and degrades the extracellular matrix releasing growth factors and proangiogenic molecules such as the vascular endothelial growth factor (VEGF-A). The plasminogen activator inhibitor-1 (PAI-1) is the main inhibitor of uPA and tPA, thereby an inhibitor of pericellular proteolysis and intravascular fibrinolysis, respectively. Paradoxically, PAI-1, which is expressed by EC during angiogenesis, is elevated in several cancers and is found to promote angiogenesis by regulating plasmin-mediated proteolysis and by promoting cellular migration through vitronectin. The urokinase-type plasminogen activator receptor (uPAR) also induces EC cellular migration during angiogenesis via interacting with signaling partners. Understanding the molecular functions of the plasminogen activator plasmin system and targeting angiogenesis via blocking serine proteases or their interactions with other molecules is one of the major therapeutic strategies scientists have been attracted to in controlling tumor growth and other pathological conditions characterized by neovascularization.     

Effect of Atmospheric Ageing on the Properties of Organosilicon (Pp-HMDSO) Thin Films

Silicon - This study reports the effect of ageing on plasma polymerized hexamethyldisiloxane (pp-HMDSO) thin films properties during 90 days storage in the atmosphere. The monitoring of...     

Inactivation of Enterobacter sakazakii in infant milk formula by gamma irradiation: determination of D10-value

ABSTRACT:  Enterobacter sakazakii is an emerging foodborne pathogen that has caused several cases of meningitis and necrotizing entercolitis in infants and has been associated with infant formulas. Five strains of E. sakazakii were inoculated individually into brain heart infusion broth and rehydrated or dehydrated infant milk formula and exposed to ionizing radiation. E. sakazakii strains in brain heart infusion broth and rehydrated infant milk formula (RIMF) were exposed to irradiation dose of up to 1 kGy while strains in dehydrated infant milk formula (DIMF) were exposed to irradiation dose of up to 9 kGy. The D₁₀-values were determined by using a linear regression model. Average calculated D₁₀-values ranged from 0.21 to 0.29 kGy, 0.24 to 0.37 kGy, and 1.06 to 1.71 kGy in brain heart infusion broth, RIMF, and DIMF, respectively. The results obtained from this study will be useful for powdered infant milk formula industries to reduce the risk associated with E. sakazakii .     

Prediction of warp and weft yarn crimp in cotton woven fabrics

The aim of this study was to develop statistical models for the prediction of warp and weft crimp percentage of cotton woven fabrics. The developed models are based on the empirical data obtained from carefully developed 60 fabric samples with different yarn linear densities, fabric densities, and weave designs. The predictability and accuracy of the developed models was assessed by correlation analysis of the predicted and actual crimp values of another set of eight fabric samples which was not used for the development of models. The results show fairly good capability and accuracy of the prediction models.