Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry     

Characterisation and modelling of VBR video traffic

The impact of VBR video traffic characteristics on broadband network performance is analysed. In particular, the authors compare in a queue the behaviour of several models that adjust different statistical parameters of actual MPEG traces. It is proved that a good fit of the probability density function (PDF) is essential to approximate queuing behaviour while the effects of short range dependence (SRD) are of secondary importance and those of long range dependence (LRD) could be neglected for practical purposes if realistic scenarios, with strict QoS requirements, are considered     

Low molecular weight heparins. Implications in anesthesia and resuscitation

Low molecular weight heparins are a group of drugs that have only recently been introduced in clinical practice. The are widely used for prophylaxis in thromboembolic disease and are being employed increasingly to treat established venous thrombosis. One way in which these drugs are often used is for prophylaxis in the perioperative period for patients at high risk of developing venous thromboembolism, and the anesthesiologist must therefore be familiar with the main aspects of this application. We review pharmacological characteristics of these drugs as well as the literature on low molecular weight heparins, stressing points of main interest to the anesthesiologist and intensive care recovery unit specialist, namely adverse effects (mainly bleeding) and the implications that use of low molecular weight heparin will have on choice of anesthetic (in particular the dilemma of whether to use local/regional anesthesia).     

Optical properties of Nd-doped Ca3(VO4)2 single crystal fiber

Optical absorption and photoluminescence of Ca₃(VO₄)₂ single crystal grown by a floating-zone technique and containing Nd³⁺ ions were investigated. High absorption coefficients and broadening of most absorption bands are present at 300 K, while substructures in some of the same bands can be evidenced at 12 K. Most features of measured spectra are characteristic of random occupation of more than a single Ca²⁺ site by the Nd³⁺ ion and of distortions provoked by different charge compensation mechanisms involving oxygen vacancies promotion in the crystal lattice. Nd³⁺ optical properties were studied by using the Judd-Ofelt theory to calculate the spectral parameters relevant for laser applications.     

Kinetic study of the decompositions involved in the thermal degradation of commercial azodicarbonamide

The transitions and reactions involved in the thermal treatment of several commercial azodicarbonamides (ADC) in an inert atmosphere have been studied by dynamic thermogravimetry analysis (TGA), mass spectrometry and Fourier transform infrared (FTIR) spectroscopy. A pseudo‐mechanistic model, involving several competitive and non‐competitive reactions, has been suggested and applied to the correlation of the weight loss data. The model applied is capable of accurately representing the different processes involved, and can be of great interest in the understanding and quantification of such phenomena, including the simulation of the instantaneous amount of gases evolved in a foaming process. In addition, a brief discussion on the methodology related to the mathematical modeling of TGA data is presented, taking into account the complex thermal behaviour of the ADC. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Tissue fixation security in transosseous rotator cuff repairs: a mechanical comparison of simple versus mattress sutures

The primary purpose of this investigation was to compare tissue fixation security by simple sutures versus mattress sutures in transosseous rotator cuff repair. These two repair techniques were each performed in 17 human cadaver shoulders, with two bone tunnels being used for the repair by two simple sutures and two other bone tunnels being used for the repair by one mattress suture. The repairs were loaded to failure in a servohydraulic materials test system. Rotator cuff repair by simple sutures was found to be significantly stronger than repair by mattress sutures (P = .0007). The average ultimate load to failure for the simple suture construct (189.62 N) was 39.72% greater than that for the mattress suture construct (135.71 N). Most of the failures occurred by suture breakage at the knot. Load-sharing by multiple suture tails and multiple knots in the simple suture configuration likely contributed to its superior strength characteristics compared with the mattress suture configuration.     

Biochemical changes in cerebrospinal fluid associated with the neurotoxic action of HIV-1]

Different intravascular ultrasound (IVUS) systems vary in their image presentation. The purpose of this study was to compare four IVUS systems in vitro to determine the accuracy of tissue characterization of atherosclerotic plaque compared with histology. Ninety-eight plaque segments from 23 formalin-fixed human iliac arteries were imaged in saline at room temperature with four different IVUS systems. To assess the accuracy of IVUS in describing plaque, three types of analysis were performed: (1) the ability to identify the presence and extent of lumen or plaque boundary; (2) sensitivity, specificity, and interobserver variability of IVUS in qualitatively identifying plaque components compared with histology; and (3) quantification of calcification. The synthetic aperture device had a lower sensitivity in identifying lumen and plaque boundaries (87%, 38% respectively) compared with other machines (96%-100%, 95%-100%). All three mechanically rotating systems had fair to good sensitivities for identifying calcification (57%-73%) or lipid filled areas (50%-83%). The sensitivity of discriminating fibrous tissue from fatty areas was low (39%-52%). The synthetic aperture system had a significantly lower sensitivity for identifying all three tissue types (4%-21%). There was significant interobserver variability (kappa value = 0.47-0.68) as well as machine to machine variability (kappa value = 0.52) for tissue characterization. Calcified areas were underestimated by System 1 (p < .05) and System 4 (p < .01) because of weaker echo reflections or poor image quality. There are significant differences in image representation among these four IVUS systems in the diagnosis of tissue components of complex atherosclerotic plaque. These variabilities should be considered when interpreting studies performed with different machines.     

Job postings and the decision to interview: A verbal protocol analysis.

Investigated the process of deciding whether or not to apply for jobs, using the verbal protocol analysis (VPA) technique. Verbal reports provided by participants as they evaluated job postings and decided whether or not to interview for jobs were analyzed to assess what information was heeded, the impact of incomplete or unusual information, and the role of inferences regarding job characteristics and probability of hire. Results indicated that location and compensation received the most attention and that participants also responded to the amount of information provided. In addition, participants made inferences about unobserved characteristics and probability of hire, although the latter played little role in the decision to interview. The study also provided support for the usefulness of VPA by demonstrating that neither the verbal protocol process nor the use of prompts significantly influenced participants' decisions (as compared with the decisions of control groups). (PsycINFO Database Record (c) 2010 APA, all rights reserved)