Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

Endogenous and copper-induced lipid peroxidation and antioxidant activity of serum in hypercholesterolemic subjects

In order to observe the transport ability of peritoneum to small molecular substances, peritoneal equilibration test (PET) was performed in 52 CAPD patients. By analysing the relationship between peritoneal transport function and dialysis adequacy, we found the average urea KT/V and Cr were significantly lower in high and low transport groups (n = 6 and n = 2) than in high average and low average groups (n = 35 and n = 9). According to the results of PET, we adjusted the dialysis program of 11 patients and the dialysis adequacy was markedly improved. We concluded that PET was helpful for selecting and adjusting CAPD program, and discussed some questions which should be payed more attention in PET operation.     

Robust autoregressive predictive power control method for mobile CDMA systems

A closed-loop power control (CLPC) scheme with a multistep (indicating multiple prediction steps) linear autoregressive predictor is presented. The proposed CLPC relies on low-rate sample vector based autoregressive prediction. Compared to currently available predictive CLCP schemes, it demonstrates particularly robust performance in the presence of large loop delays and channel estimation errors.     

Lipid peroxides, glutathione, gamma-glutamylcysteine synthetase and gamma-glutamyltranspeptidase activities in several tissues of rats following water-immersion stress

The effects of water-immersion restraint (WIR) stress on lipid peroxide, glutathione (GSH), glutathione peroxidase (GSH-Px), gamma-glutamylcysteine synthetase (gamma-GCS) and gamma-glutamyltranspeptidase (gamma-GT) activities in several tissues of rats were investigated. Hepatic and intestinal lipid peroxide levels were increased significantly in the WIR stress group. In both tissues, GSH levels were significantly decreased and gamma-GCS activity was significantly increased. In addition, gamma-GT activities remained unchanged in both tissues following WIR stress. However, lipid peroxide and GSH levels did not change in the stomach and brain in the WIR stress group compared to the control group. These results suggest that lipid peroxidation, but not the depression of GSH synthesis and/or the increase of GSH breakdown may be a factor in hepatic and intestinal GSH reduction following WIR stress.     

Effects of dowels produced from various materials on withdrawal strength in MDF and Pb

Wood dowels are commonly used in the construction furniture, but little information is available about the additive effects of dowels on the ultimate withdrawal strength of single or multidowel joints. This study was carried out to determine the tensile strength of 10‐mm‐diameter dowels produced from medium‐density fiberboard (MDF), plywood, scotch pine (Pinus sylvestris L.), and beech (Fagus orientalis lipsky), bonded parallel and vertical to the surface of MDF and particleboard (Pb) with poly(vinyl acetate) (PVAc) and Desmodur‐VTKA (D‐VTKA). Tensile strength was applied to the dowels according to the procedure in the ASTM‐D 1037 standard. The effects of dowel species, direction of tensile, composite material, and type of adhesive on tensile strength were determined. The results showed that the highest tensile strength was obtained in beech dowels bonded vertically with PVAc adhesive to the surface of MDF at 7.91 N/mm². If the dowels used in furniture production are subjected to great tensile strength, beech dowels bonded with PVAc adhesive on MDF should be used. However, when dowels produced from MDF and plywood waste are used, they also can produce positive results. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 531–535, 2003     

HYDRODYNAMIC STUDIES IN A HALF SLOT-RECTANGULAR SPOUTED BED COLUMN

Experiments were carried out in a half slot-rectangular spouted bed to investigate the effects of slot width and lower section basal angle on column hydrodynamics. Flow regimes, minimum spouting velocity, spouting and maximum pressure drops, and maximum spoutable bed height were determined for 4 mm diameter polyethylene particles. The results are compared with those for conventional cylindrical and rectangular spouted beds. Correlations for each hydrodynamic parameter are developed and compared with equations available in the literature.     

A polyphenolic biomacromolecule prepared from a flavonoid: Catechin as degradable microparticles

Catechin (CAT) was crosslinked with trimethylolpropane triglycidyl ether (TMPTGE) to obtain degradable poly(CAT) particles in a single step. Spherical p(CAT) particles with tens of micrometer size range and an isoelectronic point at pH 1.2 were obtained. The hydrolytic degradation of p(CAT) particles provided sustainable and extended release with 264 mg/g CAT release within 10 days at pH 7.4. The antioxidant capacity of 55.0 ± 0.9 μg/ml gallic acid equivalent in terms of total phenol content, and 0.88 ± 0.3 μmol/g trolox equivalent were estimated for p(CAT) particles displaying strong radical scavenging capability. Blood clotting and hemolysis assays demonstrated dose-dependent blood compatibility revealing higher blood compatibility for p(CAT) particles up to 10 μg/ml concentration. The cytotoxicity results show that p(CAT) particles have almost no toxicity for CCD841 normal colon cells at 250 μg/ml concentration in 24 h incubation time giving ~97% cell viability, whereas CAT molecules only provide ~34% cell viability.     

Supplier selection with an integrated methodology in unknown environment

This paper proposes an integrated methodology and its solution for supplier selection problem. A two-stage stochastic programming model and fuzzy TOPSIS methods are consolidated in this methodology. After pre-research phase, in the second part of the methodology, fuzzy TOPSIS is used for ranking potential suppliers considering qualitative data under fuzzy environment. In the third part of the methodology a group of ranked potential suppliers are included in a two-stage stochastic programming model for evaluation. In the two-stage stochastic programming model demand is assumed as uncertain and different scenarios are generated for this parameter. With this methodology, supplier evaluation procedure can be done in unknown environment. Our methodology is interested with a problem in multi-product, multi-period and multi-sourcing environment.     

Instance-Based Regression by Partitioning Feature Projections

A new instance-based learning method is presented for regression problems with high-dimensional data. As an instance-based approach, the conventional method, KNN, is very popular for classification. Although KNN performs well on classification tasks, it does not perform as well on regression problems. We have developed a new instance-based method, called Regression by Partitioning Feature Projections (RPFP) which is designed to meet the requirement for a lazy method that achieves high levels of accuracy on regression problems. RPFP gives better performance than well-known eager approaches found in machine learning and statistics such as MARS, rule-based regression, and regression tree induction systems. The most important property of RPFP is that it is a projection-based approach that can handle interactions. We show that it outperforms existing eager or lazy approaches on many domains when there are many missing values in the training data.     

Application of ion implantation for synthesis of copper nanoparticles in a zinc oxide matrix for obtaining new nonlinear optical materials

We have obtained a layered composite material by implantation of single crystal zinc oxide (ZnO) substrates with 160-keV Cu⁺ ions to a dose of 10¹⁶ or 10¹⁷ cm⁻². The composite was studied by linear optical absorption spectroscopy; the nonlinear optical characteristics were determined by means of Z-scanning at a laser radiation wavelength of 532 nm. The appearance of the optical plasmon resonance bands in the spectra indicated that ion implantation to the higher dose provides for the formation of copper nanoparticles in a subsurface layer of ZnO. The new nonlinear optical material comprising metal nanoparticles in a ZnO matrix exhibits the phenomenon of self-defocusing and possesses a high nonlinear absorption coefficient (β=2.07×10⁻³ cm/W).