Liquid phase sintering and characterization of SiC ceramics

The present study focuses on the sintering of silicon carbide-based ceramics (SiC) by liquid phase sintering (LPS) followed by characterization of the produced ceramics. AlN/Re₂O₃ mixtures were used as additives in the LPS process. In the first step, the LPS-SiC materials were produced in a graphite resistance furnace in the form of discs at different temperatures. The conditions with the best results regarding real density and relative density were taken as reference for sintering in the form of prismatic bars. In the second step, these samples were evaluated regarding fracture toughness (K_IC), by the Single Edge V Notch Beam – SEVNB – method, and flexural strength. K_IC behavior was evaluated according to the depth and curvature radius of the notches. Reliable K_IC values were presented when the ceramic displayed a small curvature radius at the notch tip. When the radius was large, it did not maintain the square root singularity of the notch tip. Tests were carried out to determine K_IC values in atmospheric air and water. K_IC results were lower in water than air, with a decrease ranging between 2.56% and 11.26%. The observations indicated a direct grain size correlation between K_IC values and fracture strength of the SiC ceramics.     

Wetting behaviour of silicon nitride ceramics by Ti–Cu alloys

The wetting of Ti–Cu alloys on Si₃N₄ was analyzed by the sessile drop method, using an imaging system with a CCD camera during the heating under argon flow. The contact angle was measured as a function of temperature and time. The samples were cut transversally and characterized by scanning electron microscopy and energy dispersive spectrometry (SEM/EDS). Wettability of the Ti–Cu alloy on Si₃N₄ is influenced by the reaction between the Ti and the ceramic. The TC1 and TC2 alloys presented low final contact angle values around 2° and 26°, respectively, indicating good wetting on Si₃N₄.     

A p‐version,first order shear deformation,finite element for geometrically non‐linear vibration of curved beams

A p‐version, hierarchical finite element for curved, moderately thick, elastic and isotropic beams is introduced. The convergence properties of the element are analysed and some results are compared with results published elsewhere or calculated using a commercial finite element package. It is verified that, with the proposed element, shear locking does not affect the computation of the natural frequencies and that low dimensional, accurate models are obtainable. Geometrically non‐linear vibrations due to finite deformations, which occur for harmonic excitations with frequencies close to the first three natural frequencies of vibration, are investigated using Newmark's method. The influence of the thickness, longitudinal inertia and curvature radius on the dynamic behaviour of curved beams are studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Combined time and wavelength multiplexing technique of optical fiber grating sensor arrays using commercial OTDR equipment

The use of a commercial optical time domain reflectometry device for simultaneous wavelength and time domain multiplexing of fiber-optic Bragg grating sensors is proposed and demonstrated. The realization of such systems provides an inexpensive way of interrogating several hundreds of sensors in a single fiber. Strain resolution of 30 /spl mu/m/m over a strain measuring range of 0.5% was obtained.     

A case-mix classification system for medical rehabilitation

Dissatisfaction with Medicare's current system of paying for rehabilitation care has led to proposals for a rehabilitation prospective payment system, but first a classification system for rehabilitation patients must be created. Data for 36,980 patients admitted to and discharged from 125 rehabilitation facilities between January 1, 1990, and April 19, 1991, were provided by the Uniform Data System for Medical Rehabilitation. Classification rules were formed using clinical judgment and a recursive partitioning algorithm. The Functional Independence Measure version of the Function Related Groups (FIM-FRGs) uses four predictor variables: diagnosis leading to disability, admission scores for motor and cognitive functional status subscales as measured by the Functional Independence Measure, and patient age. The system contains 53 FRGs and explains 31.3% of the variance in the natural logarithm length of stay for patients in a validation sample. The FIM-FRG classification system is conceptually simple and stable when tested on a validation sample. The classification system contains a manageable number of groups, and may represent a solution to the problem of classifying medical rehabilitation patients for payment, facility planning, and research on the outcomes, quality, and cost of rehabilitation.     

Vitek system antimicrobial susceptibility testing of O1, O139, and non-O1 Vibrio cholerae

Vibrio cholerae causes epidemic diarrhea throughout the world. Fluid replacement is the primary therapy for cholera; however, high mortality rates often necessitate the use of antibiotics. V. cholerae, like most bacteria, has developed resistance to some antibiotics. In the early 1990s a new serotype strain, Bengal 0139, began a new wave of cholera epidemics. Bengal isolates showed unique trends in antimicrobial resistance. Many clinical laboratories use automated antibiotic susceptibility testing for V. cholerae. It is important to know if automated susceptibility test results for V. cholerae coincide with reported trends in antibiotic susceptibility. In the present study, we used the Vitek automated susceptibility system to determine the susceptibilities of 79 V. cholerae O1 isolates, 100 O139 isolates, and 112 non-O1 isolates. Vitek susceptibilities for V. cholerae showed a good correlation with preestablished epidemiological data. Although the new O139 serogroup showed a trend of increased resistance to trimethoprim-sulfamethoxazole and nitrofurantoin, it was more susceptible to ampicillin than previous serogroup O1 and non-O1 strains. Regardless of serogroup, > or = 98% of the V. cholerae isolates tested were susceptible to most antibiotics tested by us. It is important to continue susceptibility testing of all new isolates of V. cholerae because of emerging resistant strains. However, V. cholerae remains susceptible to most of the available antibiotics.     

Pharmacokinetics of hyperimmune anti-human immunodeficiency virus immunoglobulin in persons with AIDS

Hyperimmune anti-human immunodeficiency virus immunoglobulin (HIVIG) is an intravenous immunoglobulin prepared from HIV-infected asymptomatic donors with a CD4 cell count greater than 400 cells/microl and a high titer of antibody to HIV-1 p24 protein. Twelve persons with AIDS received four doses of HMG (two at 50 mg/kg of body weight and then two at 200 mg/kg) every 28 days. Pharmacokinetics were evaluated by measurement of anti-p24 antibody. HIVIG was well tolerated, and all participants completed the study. Three subjects who were not receiving Pneumocystis carinii pneumonia (PCP) prophylaxis developed PCP. The mean value for HIVIG clearance was 3.02 ml/kg/day at 50 mg/kg and 3.65 ml/kg/day at 200 mg/kg (P = 0.027); the mean trough antibody titers (reciprocal units) were 1,442 and 4,428, respectively. This study indicates that high titers of anti-p24 antibody can be maintained with a monthly administration schedule of HIVIG and that short-term safety is acceptable. Comparisons to evaluate the therapeutic potential of HIVIG are justified.     

Interlaboratory ring test of time-resolved fluoroimmunoassays for zeranol and alpha-zearalenol and comparison with zeranol test kits.

Many zeranol immunoassay test kits cross-react with toxins formed by naturally occurring Fusarium spp. fungi, leading to false-positive screening results. This paper describes the evaluation and application of recently published, dry reagent time-resolved fluoroimmunoassays (TR-FIA) for zeranol and the toxin alpha-zearalenol. A ring test of bovine urine fortified with zeranol and/or alpha-zearalenol in four European Union National Reference Laboratories demonstrated that the TR-FIA tests were accurate and robust. The alpha-zearalenol TR-FIA satisfactorily quantified alpha-zearalenol in urine fortified at 10-30 ng ml(-1). The specificity-enhanced zeranol TR-FIA accurately quantified zeranol in the range 2-5 ng ml(-1) and gave no false-positive results in blank urine, even in the presence of 30 ng ml(-1) alpha-zearalenol. Zeranol TR-FIA specificity was demonstrated further by analysing incurred zeranol-free urine samples containing natural Fusarium spp. toxins. The TR-FIA yielded no false-positive results in the presence of up to 22 ng ml(-1) toxins. The performance of four commercially available zeranol immunoassay test kits was more variable. Three kits produced many false-positive results. One kit produced only one potential false-positive using a protocol that was longer than that of the TR-FIA. These TR-FIAs will be valuable tools to develop inspection criteria to distinguish illegal zeranol abuse from contamination arising from in vivo metabolism of Fusarium spp. toxins.