Cross spectral iris recognition for surveillance based applications

Multimedia Tools and Applications - Human iris has been explored as one of the most promising biometric traits since last many years. This paper presents a new ingenious feature extraction approach...     

Design of a wideband microstrip antenna and the use of artificial neural networks in parameter calculation

This paper deals with the design of a multi-slot hole-coupled microstrip antenna on a substrate of 2 mm thickness that gives multi-frequency (wideband) characteristics. The Method of Moments (MoM)-based IE3D software was used to simulate the results for return loss, VSWR, the Smith chart, and the radiation patterns. A tunnel-based artificial neural network (ANN) was also developed to calculate the radiation patterns of the antenna. The radiation patterns were measured experimentally at 10.5 GHz and 12 GHz. The experimental results were in good agreement with the simulated results from IE3D and those of the artificial neural network. A new method of using a genetic algorithm (GA) in an artificial neural network is also discussed. This new method was used to calculate the resonant frequency of a single-shorting-post microstrip antenna. The resonant frequency calculated using the genetic-algorithm-coupled artificial neural network was compared with the analytical and experimental results. The results obtained were in very good agreement with the experimental results.     

Polymers from renewable resources. I. Castor oil-based interpenetrating polymer networks: Thermal and mechanical properties

A number of polyurethanes (PUs) were synthesized by reacting castor oil with toluene-2,4-diisocyanate and hexamethylene diisocyanate and varying the NCO/OH ratio. All these polyurethanes were reacted with some acrylic monomers like ethyl acrylate, n-butyl acrylate, ethyl methacrylate, and butyl methacrylate using a crosslinker ethylene glycol dimethyl-acrylate and benzoyl peroxide as the initiator. The physicochemical properties of interpenetrating polymer networks (IPNs) are reported. Thermogravimetric analysis was used to study the thermal behavior of IPNs and the evaluation of kinetic parameters. Degradation mechanism has also been investigated. Some of the mechanical properties viz. tensile strength, shore-A hardness, elongation at break, etc. are also reported. © 1993 John Wiley & Sons, Inc.     

An efficient new method for the detection of QRS in electrocardiogram

A simple and efficient new method for QRS detection in Electrocardiogram (ECG) is proposed in this paper. Initially data is preprocessed using two stage median filter for removing baseline drift. The second stage enhances the peaks of ECG wave components by using sixth power of signal. The next stage identifies the QRS complex by taking a variable window size. The detection sensitivity (Se) and positive predictivity (+P) of CSE (Common Standards for Quantitative Electrocardiography) measurement database, MIT/BIH (Massachusetts Institute of Technology/Beth Israel Hospital) Arrhythmia database, European ST-T database and QT database are Se 99.51 & +P 99.69%, Se 99.21 & +P 99.34%, Se 99.53 & +P 99.72% and Se 99.87 & +P 99.95% respectively. These four standard databases used to perform QRS detection considered 368 cases, tested 1,006,168 beats and achieved overall average sensitivity 99.52% and positive predictivity 99.69%. The MIT/BIH Noise Stress Test Database also tested by proposed method.     

Dielectric Properties of the "Twinned" 8H-Hexagonal Perovskite Ba8Nb4Ti3O24

The dielectric properties of dense ceramics of the "twinned" 8H-hexagonal perovskite Ba₈Nb₄Ti₃O₂₄ are reported. Single-phase powders were obtained from the mixed-oxide route at 1325°C and ceramics (>92% of the theoretical X-ray density) by sintering in air or flowing O₂ at 1400°–1450°C. The ceramics are dc insulators with a band gap >3.4 eV that resonate at microwave frequencies with relative permittivity, ɛ_r∼44–48, quality factor, Q × f _r∼21 000–23 500 GHz (at f _r∼5.5 GHz) and temperature coefficient of resonant frequency, TC _f,∼+115 ppm/K.     

A single-solenoid pulsed-magnet system for single-crystal scattering studies

We present a pulsed-magnet system that enables x-ray single-crystal diffraction in addition to powder and spectroscopic studies with the magnetic field applied on or close to the scattering plane. The apparatus consists of a single large-bore solenoid, cooled by liquid nitrogen. A second independent closed-cycle cryostat is used for cooling samples near liquid helium temperatures. Pulsed magnetic fields close to ~30 T with a zero-to-peak-field rise time of ~2.9 ms are generated by discharging a 40 kJ capacitor bank into the magnet coil. The unique characteristic of this instrument is the preservation of maximum scattering angle (~23.6°) on the entrance and exit sides of the magnet bore by virtue of a novel double-funnel insert. This instrument will facilitate x-ray diffraction and spectroscopic studies that are impractical, if not impossible, to perform using split-pair and narrow-opening solenoid magnets. Furthermore, it offers a practical solution for preserving optical access in future higher-field pulsed magnets.     

Physicochemical Characterization of Interaction of Ibuprofen by Solid-State Milling with Aluminum Hydroxide

This present study is a preliminary exploration of the affinity between a carboxylic model drug ibuprofen and aluminum hydroxide. Ibuprofen was comilled with aluminum hydroxide in different weight ratios in the solid state and was characterized by scanning electron microscopy (SEM), X-ray powder diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), and in vitro dissolution studies. XRD and SEM studies indicated complete interaction of ibuprofen with aluminum hydroxide and complete amorphization of aluminum hydroxide–ibuprofen complexed salt as well, on comilling with aluminum hydroxide at 1:2 ratio. FTIR data showed the disappearance of acid carbonyl peak with the appearance and the corresponding increase in absorbance of new signal at 1,682 cm^?1 in the 1:1 and 1:2 ibuprofen–aluminum hydroxide-comilled powder. The accompanied increase in the absorbance of carboxylate peak in the ibuprofen–aluminum hydroxide physical mixture, and 1:0.1, 1:0.5, 1:1, and 1:2 (IBA_pm, and IB₁A_0.1, IB₁A_0.5, IB₁A₁, and IB₁A₂, respectively) comilled powder indicated an acid–base reaction between ibuprofen and aluminum hydroxide. On storage at 40°C and 75% relative humidity (RH) for 10 weeks, XRD study showed the absence of reversion to the crystalline state and FTIR data revealed continued increase of new signal at 1,682 cm^?1 relative to carboxylic acid peak and no reappearance of carboxylic acid peak. In vitro dissolution studies revealed that the percent release of ibuprofen from the aluminum hydroxide-comilled powder is in the following order: IB₁A₂ < IB₁A₁ < ibuprofen crystal < ibuprofen milled alone < IB₁A_0.1 < IB₁A_0.5. Aluminum metal cation might have interacted to form a complex through the carboxyl and carbonyl groups of ibuprofen. Improved dissolution of drug associated with IB₁A_0.1 and IB₁A_0.5 is because of the absence of a new signal at 1,682 cm^?1 and improved amorphization of the drug to some extent. Dissolution of drug affected in IB₁A₂ and IB₁A₁ may be because of the insoluble stable complex formation.     

Dry machining of aluminum for proper selection of cutting tool: tool performance and tool wear

Machining of aluminum and its alloy is very difficult due to the adhesion and diffusion of aluminum, thus the formation of built-up edge (BUE) on the surface. The BUE, which affects the surface integrity and tool life significantly, affects the service and performance of the workpiece. The minimization of BUE was carried out by selection of proper cutting speed, feed, depth of cut, and cutting tool material. This paper presents machining of rolled aluminum at cutting speeds of 336, 426, and 540 m/min, the feeds of 0.045, 0.06, and 0.09 mm/rev, and a constant depth of cut of 0.2 mm in dry condition. Five cutting tools WC SPUN grade, WC SPGN grade, WC + PVD (physical vapor deposition) TiN coating, WC + Ti (C, N) + Al₂O₃ PVD multilayer coatings, and PCD (polycrystalline diamond) were utilized for the experiments. The surface roughness produced, total flank wear, and cut chip thicknesses were measured. The characterization of the tool was carried out by a scanning electron microscope (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) pattern. The chip underface was analyzed for the study of chip deformation produced after machining. The results indicated that the PCD tool provides better results in terms of roughness, tool wear, and smoother chip underface. It provides promising results in all aspects.