Influence of series resistance in oxide parameter extraction data from accelerated tests

Accelerated reliability tests on thin oxide capacitors can be affected by series resistance effects at high stress conditions. The purpose of this work is to point out such problems both with measurements and simulations. It is shown that breakdown electric field is overestimated. Due to the resulting nonuniform stress, charge to breakdown density is underestimated if the test structure layout is not accurately designed. In any case the series resistance effects can have an undesirable impact on the reliability evaluation of thin dielectrics.     

Ascitic fluid analysis in hepatocellular carcinoma

BACKGROUND: Ascites in patients with hepatocellular carcinoma (HCC) is a poorly characterized subgroup of malignancy-related ascites. Not only the underlying liver disease, but also the tumor growth and spread contributes to the ascites formation. The authors differentiated ascites in HCC from other types of ascites. METHODS: The authors analyzed the ascitic fluid of 185 consecutive patients (89 liver cirrhosis, 33 HCC, 31 peritoneal carcinomatosis, 22 liver metastases, 10 spontaneous bacterial peritonitis). RESULTS: Each subgroup showed a typical pattern. Compared with the cirrhotic patients, those with HCC showed a higher frequency of positive cytologic findings (4 of 33 versus 0/89, P < 0.004), elevated fibronectin concentration (10/33 versus 8/89, P < 0.004), and elevated polymorphonuclear cell count (10/33 versus 5/89 P < 0.004). CONCLUSIONS: A significant number of patients with ascites and HCC patients showed signs of peritoneal infiltration with positive cytologic findings and increased concentration of fibronectin. Moreover, neutrocytic ascites without signs of superinfection is relatively common (30%).     

Physical map of the D6S149-D6S193 region on chromosome 6Q27 and its involvement in benign surface epithelial ovarian tumours

A detailed long range restriction map of the region defined by markers D6S149 and D6S193 on chromosome 6q27 has been constructed. This was achieved by YAC cloning and contig assembling of the same region. Seven YAC clones were found to span the almost 1000 Kb region flanked by the two markers which on the genetic map resulted to be 1.9 cM apart. With some of the characterized YAC clones we undertook a molecular cytogenetic analysis of 20 benign ovarian tumors. The rationale for this was the recent mapping to a region of chromosome 6q27, flanked by markers D6281 and D6S133, of a locus for the SV40-mediated immortalization of human cells (SEN6 gene). Noteworthy we found that the the D6S149-D6S193 region (comprised in the larger D6S281-D6S133 physical interval) was altered in all samples analysed adding support to the occurrence of a immortalization step in this type of tumors.     

Crystallization,morphology, structure and thermal behaviour of nylon-6/rubber blends

An experimental study was carried out in order to investigate the morphological, kinetic, structural and thermodynamic properties of nylon-6/rubber (namely ethylene-propylene copolymer (EPM) and ethylene-propylene copolymer functionalized by inserting along its backbone succinic anhydride groups (EPM-g-SA)) blends. The morphology and the overall kinetics of crystallization of the blends strongly depend on the type of copolymer added to nylon and on the blend composition. The EPM-g-SA acts as a nucleating agent for the Ny spherulites and at the same time causes a drastic depression of the overall kinetic rate constant. This decrease is related to the increase of the melt viscosity observed in Ny/EPM-g-SA blends. The crystalline lamella thickness of the Ny phase in the blends is lower than that of pure Ny crystallized at the same T_c suggesting that the presence in the melt of an elastomeric phase disturbs the growth of the Ny crystals. The rubber does not influence the thermal behaviour of the nylon. The results found lead to the conclusion that in the melt nylon-6 is incompatible with both EPM and EPM-g-SA copolymers.     

Novel poly(etheraroyl-co-terephthal) hydrazides with liquid crystalline behaviour

Novel poly(etheraroyl-co-terephthal)hydrazides with liquid crystalline (LC) behaviour, synthesized by solution polycondensation followed by non-solvent coagulation in water, have been characterized by means of Fourier Transform infrared (FT-i.r.), differential scanning calorimetry (DSC) and wide angle X-ray scattering (WAXS) techniques. DSC thermograms and WAXS intensity profiles of as polymerized and coagulated homo- and copolymers are strongly dependent upon the molecular structure and constitution of the polymers: the poly(etheraroyl-hydrazide) homopolymer shows an LC behaviour and such a characteristic is maintained in copolymers with low content of terephthaloyldichloride comonomer, while a further increase in comonomer content attenuates this LC attitude. Annealing treatments on as polymerized and coagulated copolymers are able to transform the LC phase metastable at room temperature into crystalline and/or amorphous phases.     

Sensitivity of SAR data to post-fire forest regrowth in Mediterranean and boreal forests

Disturbed forests may need decades to reach a mature stage and optically-based vegetation indices are usually poorly suited for monitoring purposes due to the rapid saturation of the signal with increasing canopy cover. Spaceborne synthetic aperture radar (SAR) data provide an alternate monitoring approach since the backscattered microwave energy is sensitive to the vegetation structure. Images from two regions in Spain and Alaska were used to analyze SAR metrics (cross-polarized backscatter and co-polarized interferometric coherence) from regrowing forests previously affected by fire. TerraSAR-X X-band backscatter showed the lowest sensitivity to forest regrowth, with the average backscatter increasing by 1-2 dB between the most recent fire scar and the unburned forest. Increased sensitivity (around 3-4 dB) was observed for C-band Envisat Advanced Synthetic Aperture (ASAR) backscatter. The Advanced Land Observing Satellite (ALOS) Phased Array-type L-band Synthetic Aperture Radar (PALSAR) L-band backscatter presented the highest dynamic range from unburned to recently burned forests (approximately 8 dB). The interferometric coherence showed low sensitivity to forest regrowth at all SAR frequencies. For Mediterranean forests, five phases of forest regrowth were discerned whereas for boreal forest, up to four different regrowth phases could be discerned with L-band SAR data. In comparison, the Normalized Difference Vegetation Index (NDVI) provided reliable differentiation only for the most recent development stages. The results obtained were consistent in both environments.     

Analysis of Nodular Cast Iron Microstructures for Micromechanical Model Development

Abstract:  One of the main factors in determining the different grades of ductile iron is the matrix structure. In the as-cast condition, the matrix will consist of varying proportions of pearlite and ferrite, and as the amount of pearlite increases, the strength and hardness of the iron also increase. Three different nodular cast irons are here considered and their microstructure characterised in detail using metallographic methods. Then micromechanics models based on the unit cell approach and the finite element method are introduced to describe the actual constitutive response of the materials and the predicted behaviours are compared with experiments.     

From toys to brain: Virtual reality applications in neuroscience

While many virtual reality (VR) applications have emerged in the areas of entertainment, education, military training, physical rehabilitation, and medicine, only recently have some research projects begun to test the possibility of using virtual environments (VEs) for research in neuroscience, neurosurgery and for the study and rehabilitation of human cognitive and functional activities. Virtual reality technology could have a strong impact on neuroscience. The key characteristic of VEs is the high level of control of the interaction with the tool without the constraints usually found in computer systems. VEs are highly flexible and programmable. They enable the therapist to present a wide variety of controlled stimuli and to measure and monitor a wide variety of responses made by the user. However, at this stage, a number of obstacles exist which have impeded the development of active research. These obstacles include problems with acquiring funding for an almost untested new treatment modality, the lack of reference standards, the non-interoperability of the VR systems and, last but not least, the relative lack of familiarity with the technology on the part of researchers in these fields.