Failed Neuroprotection of Combined Inhibition of L-Type and ASIC1a Calcium Channels with Nimodipine and Amiloride

Effective pharmacological neuroprotection is one of the most desired aims in modern medicine. We postulated that a combination of two clinically used drugs—nimodipine (L-Type voltage-gated calcium channel blocker) and amiloride (acid-sensing ion channel inhibitor)—might act synergistically in an experimental model of ischaemia, targeting the intracellular rise in calcium as a pathway in neuronal cell death. We used organotypic hippocampal slices of mice pups and a well-established regimen of oxygen-glucose deprivation (OGD) to assess a possible neuroprotective effect. Neither nimodipine (at 10 or 20 µM) alone or in combination with amiloride (at 100 µM) showed any amelioration. Dissolved at 2.0 Vol.% dimethyl-sulfoxide (DMSO), the combination of both components even increased cell damage (p = 0.0001), an effect not observed with amiloride alone. We conclude that neither amiloride nor nimodipine do offer neuroprotection in an in vitro ischaemia model. On a technical note, the use of DMSO should be carefully evaluated in neuroprotective experiments, since it possibly alters cell damage.     

Finite‐Element Implementation of a Self‐consistent Texture Model with a Hardening Law Based on Dislocation Densities

A self‐consistent texture model is implemented in the finite‐element code ABAQUS/Explicit®. Hardening of the slip systems is described by evolution laws for dislocation densities, and the Bauschinger effect is included. With these ingredients the cold rolling of an IF‐steel is simulated and the evolution of texture and anisotropy is examined. The use of the dislocation based hardening law is found to have a significant effect on the evolution of the anisotropic yield surface, but only very little influence on the texture. Furthermore, the hardening model is used to investigate the evolution of dislocation densities in differently oriented grains during plane strain compression. It is found that the dislocation density varies greatly depending on orientation, an observation which can help to explain the orientation dependence of recrystallization.     

Zu einem Phänomen der Lochkorrosionsbegrenzung bei hochlegierten Sonderedelstählen und NiCrMo-Legierungen in Chloridlösungen

On a phenomenon of the limitation of pitting corrosion at high alloyed special stainless steels and NiCrMo-alloys in chloride solutions Testing the pitting corrosion resistance of high alloyed special stainless steels and NiCrMo-alloys in chloride solutions there was observed a limitation of the pitting corrosion range toward more positive potentials. Above this limitation, the so-called pitting corrosion limitation potential, the pit initiation by all means is prevented, but the growth of pits which had been initiated before in the pitting corrosion range not necessarily comes to a stop. Therefore current density-potential curves which are obtained by downward polarization after an initial potential jump into the transpassive region and chronopotentiostatic tests are more suitable to investigate this phenomenon than cyclic polarization measurements and potentiostatic alteration tests. There is indicated a dependence of this phenomenon on temperature. The phenomenon of a limitation of the pitting corrosion range toward more positive potentials has been found until now at alloy 926, alloy 31, alloy 28, alloy 59 and alloy C-276.     

Crystallization of Polymer-Derived Silicon Carbonitride at 1873 K under Nitrogen Overpressure

The chemical stability of an amorphous silicon carbonitride ceramic, having the composition 0.57SiC·0.43Si₃N₄·0.49C is studied as a function of nitrogen overpressure at 1873 K. The ceramic suffers a weight loss at p _N2 < 3.5 bar (1 bar = 100 kPa), does not show a weight change from 3.5 to 11 bar, and gains weight above 11 bar. The structure of the ceramic changes with pressure: it is crystalline from 1 to 6 bar, amorphous at ∼10 bar, and is crystalline above ∼10 bar. The weight-loss transition, at 3.5 bar, is in excellent agreement with the prediction from thermodynamic analysis when the activities of carbon, SiC, and Si₃N₄ are set equal to those of the crystalline forms; this implies that the material crystallizes before decomposition. The amorphous to crystalline transition that occurs at ∼10 bar, and which is accompanied by weight gain, is likely to have taken place by a different mechanism. A nucleation and growth reaction with the atmospheric nitrogen is proposed as the likely mechanism. The supersaturation required to nucleate α-Si₃N₄ crystals is calculated to be 30 kJ/mol.     

An investigation of seated postural stability

Results of tests undertaken to identify which measures of seated posture control are most effective in two areas, distinguishing differences in the x and y direction control strategies for a given task and distinguishing differences in overall control strategies for pairs of different tasks, are presented. The test platform, calibration tests, test protocol, and data analysis method are described. The results of statistical analyses performed on the data are summarized     

Sparking at cathode tools during electrochemical machining in flow-through cells

The current density used in electrochemical machining can be increased only up to a certain value, above which the formation of electric sparks on the cathode (tool) is observed, whereby the latter is damaged and the anode surface becomes rough. The present work is devoted to the measurement of this critical density for small metal cathodes placed on the wall of a flow-through channel for Reynolds numbers from 1265 up to 5902 and static pressures ranging from 0.1 up to 1.0 MPa. The results are correlated by criterion equations which gave values of critical (sparking) cathodic current density,j _s, with an average error of 7.1 % for laminar flow and 4.1 % for turbulent flow. The equations can be used for the calculation of the sparking current density for industrial flow-through cells for electrochemical machining.     

Active disks for large-scale data processing

As processor performance increases and memory cost decreases, system intelligence continues to move away from the CPU and into peripherals. Storage system designers use this trend toward excess computing power to perform more complex processing and optimizations inside storage devices. To date, such optimizations take place at relatively low levels of the storage protocol. Trends in storage density, mechanics, and electronics eliminate the hardware bottleneck and put pressure on interconnects and hosts to move data more efficiently. We propose using an active disk storage device that combines on-drive processing and memory with software downloadability to allow disks to execute application-level functions directly at the device. Moving portions of an application's processing to a storage device significantly reduces data traffic and leverages the parallelism already present in large systems, dramatically reducing the execution time for many basic data mining tasks     

Identification of metal ion solutions using acoustic plate mode devices and pattern recognition

The temperature dependence of acoustic plate mode (APM) devices used as probes for dilute electrolytes is described. Specifically, the probe responses that consist of the frequency change and device loss were studied for dilute aqueous solutions of alkali metal ions. It is shown that by integrating the temperature dependence of the APM probe responses with pattern recognition techniques, valuable information about the solutions can be obtained that include identification and quantification. A preliminary investigation of the feasibility of identifying binary mixtures of the alkali metal ion solutions using only the temperature responses showed good results.