Blind digital watermarking in PDF documents using Spread Transform Dither Modulation

In this paper, a blind digital watermarking scheme for Portable Document Format (PDF) documents is proposed. The proposed method is based on a variant Quantization Index Modulation (QIM) method called Spread Transform Dither Modulation (STDM). Each bit of the secret message is embedded into a group of characters, more specifically in their x-coordinate values. The method exhibits experiments of two opposite objectives: transparency and robustness, and is motivated to present an acceptable distortion value that shows sufficient robustness under high density noises attacks while preserving sufficient transparency.     

Mixed convective heat transfer enhancement in a ventilated cavity by flow modulation via rotating plate

The present study numerically explores the mixed convection phenomena in a differentially heated ventilated square cavity with active flow modulation via a rotating plate. Forced convection flow in the cavity is attained by maintaining external fluid flow through an opening at the bottom of the left cavity wall while leaving it through another opening at the right cavity wall. A counter-clockwise rotating plate at the center of the cavity acts as an active flow modulator. Moving mesh approach is used for the rotation of the plate and the numerical solution is achieved using arbitrary Lagrangian-Eulerian finite element formulation with a quadrilateral discretization scheme. Transient parametric simulations have been performed for various frequency of the rotating plate for a fixed Reynolds number (Re) of 100 based on maximum inlet flow velocity while the Richardson number (Ri) is maintained at unity. Heat transfer performance has been evaluated in terms of spatially averaged Nusselt number and time-averaged Nusselt number along the heated wall. Power spectrum analysis in the frequency domain obtained from the fast Fourier transform analysis indicates that thermal frequency and plate frequency start to deviate from each other at higher values of velocity ratio (>4).     

Influence of bunch maturation and chemical precursors on acrylamide formation in starchy banana chips

The present study investigated the effect of ripening stages and chemical precursors on acrylamide formation in deep-fried chips of five plantains and one cooking banana. The highest level of acrylamide was found in the cooking banana, followed by False Horn plantain and French plantain, respectively. French plantain hybrids exhibited a significantly lower (P < 0.05) level of acrylamide when compared to French plantain. The ripening stage demonstrated a positive Pearson correlation (P < 0.05, r = 0.57) with acrylamide formation. As ripening progressed, the levels of glucose and fructose significantly increased (P < 0.05) and showed a positive correlation with acrylamide formation (r = 0.85 and 0.96, respectively). The level of the amino acid asparagine during ripening was not correlated with acrylamide formation. In contrast, the level of histidine, arginine, iso-leucine and cystine during ripening was positively correlated (P < 0.05, r > 0.60) with acrylamide formation in fried chips. The higher level of TP was significantly related (P < 0.05) to the lower level of acrylamide (r = −0.62). The reduced levels of carotenoid isomers, except lutein, during fruit ripening were positively correlated (P < 0.05) with acrylamide formation, especially trans-BC (r = 0.72) and 9-cis-BC(r = 0.64).     

Arsenic pollution at the industrial site of Reppel-Bocholt (north Belgium)

An industrial site, polluted with As and heavy metals, was investigated by combining chemical (sequential extractions and pHstat leaching tests), physical and mineralogical characterization of soil samples and slag fragments, and by the analysis of soil porewater aimed at assessing the distribution, speciation and mobility of heavy metals and As. On the site itself, arsenic concentrations up to 3.6% in surficial soil samples and up to 22% in slag fragments were found, together with elevated concentrations (percentage level) of Cu, Co, Ni, Zn and Pb. High concentrations of arsenic (up to 38,000 microg/l) and heavy metals (up to 1700 microg/l Cu and 4700 microg/l Zn) were also found in the in situ sampled soil porewater, highlighting the considerable availability of As, Zn and Cu for uptake by plants and leaching to the ground water. Sequential extractions also indicated a high availability of arsenic and copper in most samples and slag fragments of the industrial site, although poorly reactive phases were encountered as well. pHstat leaching tests confirmed that the present leaching of contaminants is alarming. Moreover, soil acidification will enhance the leaching of contaminants, emphasizing that remediation of the industrial site is urgent. Small scale variability of total metal concentrations and metal speciation, both in the horizontal and vertical direction, and the occurrence of a camouflage layer underline the importance of elaborate sampling for pollution assessment on an industrial site.     

Solution calorimetry: A novel perspective into the dissolution process of food powders

The enthalpy of dissolution of two food powders, maltodextrin and skim milk, was studied by means of isothermal solution calorimetry. The effects of the moisture content and the physical state of the samples were investigated. A reduced exothermic response was found as the moisture content of the samples increased. It was shown that this effect is reversible upon re-drying of the solid, unless crystallization occurs. In the skim milk powder, crystallization of lactose occurred, leading to a less exothermic response. In addition, the dissolution kinetics of single particles was followed in situ with real time video acquisition and a novel image analysis technique. The data showed a significant effect of the physical state of the powder on the dissolution kinetics. Fully amorphous skim milk powder dissolved significantly faster than the recrystallized counterpart. A clear relation was observed between the physical state of the powders, their thermodynamic response and the dissolution kinetics.     

THE HYDROCARBON POTENTIAL OF LEBANON: NEW INSIGHTS FROM REGIONAL CORRELATIONS AND STUDIES OF JURASSIC DOLOMITIZATION

This paper presents an updated review of the petroleum prospects of Lebanon. We briefly describe the known hydrocarbon shows in Lebanon and compare them with adjacent countries, leading to the construction of a model for hydrocarbon migration which takes into account regional facies and reservoir correlations. The oldest exposed rocks in Lebanon are the Jurassic carbonates of the Kesrouane Formation (over 1,000m thick). This formation can be divided into a basal unit dominated by seepage‐reflux stratabound dolostones (the Chouane Member,) and an overlying limestone‐prone unit (the Nahr Ibrahim Member). A two‐stage dolomitisation model for the Jurassic carbonates in Lebanon has recently been proposed by the authors. According to this model, second‐stage Late Jurassic hydrothermal dolomitisation is believed to have occurred as a result of the circulation of mixed dolomitising fluids along faults. Hence, the resulting dolostones are fault‐controlled and strata‐discordant, and may occur at any level within the Kesrouane Formation, locally redolomitising the Chouane Member dolostones and replacing the Nahr Ibrahim Member limestones. In this paper, we discuss the implications of diagenesis (especially dolomitisation) on the petroleum prospects of the Kesrouane Formation in Lebanon. The hydrothermal fault‐related dolostones possess porosities of up to 20%, which result from intercrystalline and mouldic porosity enhancement. Porosities in the stratabound reflux dolostones (Early Jurassic) and limestones are much lower. The fact that most of the Jurassic system in onshore Lebanon was affected by meteoric diagenesis during the Late Jurassic ‐ Early Cretaceous and the Cenozoic may downgrade hydrocarbon prospectivity. However, offshore areas far from the meteoric realm may have been less (or not at all) affected by meteoric invasion. If effective seals are present there, these areas may host promising Jurassic reservoir units. We also review the prospectivity of unexposed Triassic potential reservoir units in onshore Lebanon (e. g. the “Qartaba” structure). By analogy with the Syrian portion of the Palmyride Basin, Triassic strata here may include both reservoir units and evaporite seals.     

Effects of dietary inclusion of xylooligo‐ saccharides,arabinoxylooligosaccha‐ rides and soluble arabinoxylan on the microbial composition of caecal contents of chickens

BACKGROUND: Arabinoxylan (AX)‐derived preparations have raised particular interest by the suggestion that they exert prebiotic properties. Therefore an in vivo experiment was conducted to study the effects of xylooligosaccharides (XOS), arabinoxylooligosaccharides (AXOS) and soluble AX (S‐AX) on several groups of gut bacteria of chickens. Chickens were fed a control diet or the same diet supplemented with 2.5 g kg^?1 of XOS (average degree of polymerisation (avDP) of 3, average degree of arabinose substitution (avDS) of 0.09), wheat bran‐derived AXOS (avDP 9, avDS 0.34) or wheat endosperm alkali‐solubilised AX (S‐AX, avDP > 6000, avDS 0.5). RESULTS: All treatment groups showed an increase in the number of caecal bifidobacteria after 2 weeks of feeding (P < 0.05), while the treatments did not impact numbers of Enterobacteriaceae and aerobic lactobacilli in the caeca relative to the control. XOS led to a tremendous increase in caecal bifidobacteria counts (10⁸ g^?1 for the XOS treatment versus 10³ g^?1 for the control treatment) after only 1 week of supplementation, while AXOS and S‐AX led to similar strong increases in bifidobacteria counts after 2 weeks of supplementation. Addition of S‐AX to the diet, but not of AXOS or XOS, led to a significantly decreased (P < 0.05) body weight gain after 2 weeks of feeding relative to animals on the control diet, consistent with its known viscosity‐related antinutritive effects in chickens. CONCLUSION: Similar to XOS, AXOS selectively stimulate the presence of bifidobacteria in the caeca of chickens, establishing their bifidogenic effect as a first indicator for prebiotic potential. Copyright © 2008 Society of Chemical Industry     

Similarity based image selection with frame rate adaptation and local event detection in wireless video sensor networks

Wireless Video Sensor Networks (WVSNs7unding environmental information. Those sensor nodes can locally process the information and then wirelessly transmit it to the coordinator and to the sink to be further processed. As a consequence, more abundant video and image data are collected. In such densely deployed networks, the problem of data redundancy arises when information are gathered from neighboring nodes. To overcome this problem, one important enabling technology for WVSN is data aggregation, which is essential to be cost-efficient. In this paper, we propose a new approach for data aggregation in WVSN based on images and shot similarity functions. It is deployed on two levels: the video-sensor node level and the coordinator level. At the sensor node level the proposed algorithms aim at reducing the number of frames sensed by the sensor nodes and sent to the coordinator. At the coordinator level, after receiving shots from different neighbouring sensor nodes, the similarity between these shots is computed to eliminate redundancies and to only send the frames which meet a certain condition to the sink. The similarity between shots is evaluated based on their color, edge and motion information. We evaluate our approach on a live scenario and compare the results with another approach from the literature in terms of data reduction and energy consumption. The results show that the two approaches have a significant data reduction to reduce the energy consumption, thus our approach tends to overcome the other one in terms of reducing the energy consumption related to the sensing process, and to the transmitting process while guaranteeing the detection of all the critical events at the node and the coordinator levels.

     

Magnetron sputtered tungsten oxide films activated by dip-coated platinum for ppm-level hydrogen detection

Platinum-activated tungsten oxide (Pt-WO₃) films are prepared for hydrogen (H₂) sensing applications. In this study, WO₃ films were fabricated by reactive magnetron sputtering and Pt clusters were deposited on them by dip-coating. The microstructure, chemical composition and phase structure of Pt-WO₃ films were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction, respectively. It was observed that a reconditioning period is required after a rest period of the sensor for obtaining a stable signal. A thermal treatment at 450 °C for 24 h is proposed to solve this problem.     

Topology optimization of heat and mass transfer problems in two fluids—one solid domains

Abstract

Among various topology optimization methods used in fluid flow problems, density approach has gained more interest compared to other techniques as level set approach, topological derivative technique, and phase field method. The key part of density approach is the penalized interpolation function, which forces progressively porous cells made of fluid and solid simultaneously to belong discretely to fluid or solid sub-domains. However this type of problem was only solved in mono-fluid domains, in which the method accounts for the distribution of a single fluid and a single solid. The actual work aims to extend topology optimization in fluid flow problems to bi-fluid domain. A new interpolation function was developed for this purpose. Furthermore a penalization function was integrated in the multiobjective function, which ensure that each fluid takes its own path in the device, while maintaining a minimal required solid thickness between the channels of different fluids. The results showed the capacity of the proposed method to deal with multiple fluid phases in minimizing the pressure drop while maximizing heat exchange between different flows. The main conclusion is the potential of density approach to be applied on optimization of heat exchangers.