Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

A concept for the generation of out-of-plane distortion from tailored FRP laminates

The phenomenon of thermally induced distortions in unsymmetrical laminates is well understood, and it may be shown that a square, unsymmetrical 0.90 laminate will tend to form two stable geometries with a snap-through phenomenon between them. This paper discusses laminates in which at each point the lay-up is symmetrical across the laminate mid-plane, but which still exhibit multiple stable geometries. The number of stable geometries can be controlled by the details of the lay-up from the minimum of two to, in principle, an unlimited number. In addition it will be shown how a similar process can be used to generate multiple stable stress states and geometries in unidirectional laminates. This paper represents a very preliminary experimental investigation of the design space available for such composite laminates. Possible applications of composites with multiple stable geometries are noted.     

Perspectives on Design and Innovation

A series of studies of top European and other firms has revealed patterns of design management associated with commercial success. Firms that invest resources and professional expertise in product and industrial design in traditional and new industries have been commercially more successful than firms that pay less attention to these aspects of design. As an industry matures there is a shift in emphasis from design associated with technological innovation, to designs supporting technical improvements, and then to supporting user needs, fashion and product variants. These issues are illustrated through the history of the evolution of the bicycle.     

A small-angle X-ray scattering study of powder compaction

This work demonstrated a novel and potentially important application of two-dimensional small-angle X-ray scattering (2D-SAXS) to investigate powder compaction. SAXS from powder compacts of three materials commonly used for pharmaceutical tabletting exhibited azimuthal variations, with stronger intensity in the direction of the applied compaction force, relative to the transverse direction. This implied that compaction of a (macroscopic) powder could also produce changes on the molecular (nanometre) scale, which can be probed by 2D-SAXS. Two possible explanations for this effect were suggested. A combination of anisometric (i.e. elongated or flattened) granules with anisotropic morphologies could result in azimuthal variation in X-ray scattering due to granule orientation. It is expected that this mechanism would require relatively low packing density, so may operate during die filling. Granule re-orientation appeared less likely at higher packing densities and compaction pressures, however. Under these conditions, the changes in the 2D-SAXS patterns would be consistent with the powder granules becoming relatively flattened in the compression direction, with corresponding changes in their nano-scale morphology. The magnitude of this effect was found to vary between the materials used and increased with compaction pressure. This suggested that 2D-SAXS studies could provide useful information on force-transmission within a compressed powder. Further analysis of the data also suggested differences in the compaction mechanisms (i.e. granule re-orientation, deformation or fragmentation) between the materials studied.     

Knowledge, data, and models

The object-oriented approach to integrating knowledge data, and models is examined. Under the object-oriented paradigm, everything is an object, which is itself an encapsulation of data and methods to manipulate and access the data within the object. Thus knowledge, data, and models can be defined as special kinds of objects. Active knowledge/data language (KDL), a functional object-oriented database system is considered, covering the active-KDL-type system and functions, and query-driven simulation     

Outcomes related to burn-related child abuse: a case series

Nationally, approximately 10% of child abuse cases involve burning, and up to 20% of pediatric burn admissions involve abuse or neglect. Historically, these cases have been more difficult to prosecute than nonburn cases for multiple reasons. Between 1995 and 1999, there were 285 pediatric (under 18) patients admitted to the Spectrum Health Regional Burn Center. Of these cases, 18 of the alleged perpetrators were legally investigated for suspicion of child abuse, and 7 received punitive sentences. We found that men tended to be prosecuted and convicted more often than women and that cases involving multiple instances of injury tended to be prosecuted more frequently. Similarly, we found that cases involving more severe injuries tended to be prosecuted more successfully. There are many psychological and social factors involved in handling burn abuse cases. However, by successful prosecution of these crimes, victims tend to fare better both socially and psychologically.     

Stability of formal thought disorder and referential communication disturbances in schizophrenia.

This study examined the degree to which different types of communication disturbances in the speech of 48 schizophrenia patients and 28 controls were variable and state related versus stable and traitlike. Clinically rated formal thought disorder and 5 types of referential disturbance showed substantial stability within participants over time. The sixth type of referential disturbance, the vague reference, was not stable over time. Formal thought disorder was associated with the severity of core psychotic symptoms in patients, whereas referential disturbances showed little or no association with positive or negative symptom severity. Furthermore, changes in psychotic symptoms over time were accompanied by corresponding changes in formal thought disorder but not referential disturbances. These results support the idea that some types of referential disturbances are traitlike and may be reflective of vulnerability as well as manifest illness. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Plateletapheresis with a next generation blood cell separator

Baeyer-Villiger monooxygenases (BVMOs) are enzymes able to perform highly regio-plus steroselective nucleophilic and electrophilic biooxygenations on various substrates. The resultant chiral products (lactones and sulfoxides) can be valuable for the chemoenzymatic synthesis of a wide range of useful compounds. Recent studies have provided a number of alternative active-site models that attempt to explain the exquisite and unusual selectivity of BVMOs. This article reviews some of the established applications, and considers the merits of the various predictive models.