Reactive wetting phenomena of MgO-C refractories in contact with CaO-SiO2 slag

Wetting phenomena between MgO C and CaO SiO2 slags were investigated by varying carbon content.A sessile drop technique was adopted to study the wetting phenomena in conjunction with a high speed camera for the observation of intrinsic wetting phenomena.The results show that the high content of SiO2 and the presence of Al2O3 in slags enhance the diffusion of Mg2+,leading to the promotion of reactive wetting.The carbon in MgO C refractory impedes the penetration of slags by repelling the slag and slowing the diffusion of Mg2+.This accounts for the non-wetting behavior of the slag on MgO C refractory with 17% (mass fraction) carbon similar to that of graphite.     

Effects of honing treatment on AIP-TiN and TiAlN coated end-mill for high speed machining

The objective of this work is to compare the tool performance of TiN and TiAlN coated carbides end-mills deposited by an arc ion plating (AIP) method, using honing treatment to polish the cutting edge surface sleekly. The curve of surface roughness versus honing time showed a rapid improvement initially and thereafter became steady, manifesting a saturation effect. The optimal honing time related to surface roughness was determined to be approximately 20 s. As the surface roughness increased, the critical loads reduced. At an average surface roughness (Ra) of 0.028 μm, the highest critical loads of TiN and TiAlN coating layers were 98 and 114 N, respectively. Tool performances of uncoated and coated tools were conducted under high speed machining (HSM) of AISI D2 cold-worked die steel (62 HRC). Consequently, the TiAlN coated end-mill using honing treatment showed excellent tool life under HSM conditions.     

ANTIGENOTOXIC, FIBRINOLYTIC AND IMMUNOMODULATING ACTIVITY OF TRADITIONALLY FERMENTED SOY PRODUCT, CHUNGKUKJANG

Fibrinolytic, antigenotoxic and immunomodulating properties of chungkukjang were evaluated. The purified fibrinolytic enzyme was characterized as an alkaline serine protease with molecular weight of 22 kDa determined by fibrin zymography and stable over pH range 6.0–10.0 below 50C. The comet assay showed that N-methyl-N ' -nitro-N-nitrosoguanidine (MNNG)-induced DNA damage level (190.8 AU) in 3T3 cells was considerably decreased to 121.2 AU with chungkukjang extracts (CB) showing 49.7% of protection. Incubation of the 3T3 cells with CB significantly reduced the cytotoxicity of MNNG. [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] (MTT) assay revealed that the addition of CB enhanced the proliferation of RAW 264.7 (mouse leukemic monocyte macrophage cell line) macrophages up to about 150% of the control levels. RAW 264.7 macrophages incubated with CB induced a strong increase in nitric oxide (NO), tumor necrosis factor -α (TNF-α) and interleukin-1α (IL-1α) with a dose-dependent manner. After 24 h incubation with 1 mg/mL of CB, NO, TNF-α and IL-1α showed the highest production of 511, 2.46 and 0.258 ng/mL, respectively.     

Ceramic-metal package for high power LED lighting

High power light-emitting diodes (LEDs)lighting has drawn a great interest in the field of street light system in recent years.Key parameters for successful launching of LED street light in the commerc...     

Prediction of fatigue crack growth path in mechanical joints using a weight function approach

Cracks often initiate from the mechanical joints which are widely used in structural components. It has been reported that cracks in mechanical joints are under mixed‐mode condition and there is a critical angle at which mode I stress intensity factor becomes maximum. The crack propagates in an arbitrary direction and the prediction of fatigue crack growth path is needed to provide against crack propagation and examine safety. In this study, mixed‐mode fatigue crack growth tests are performed for horizontal and critical inclined cracks in mechanical joints. Fatigue crack growth paths are predicted using a weight function approach and maximum tangential stress criterion.     

Effects of honing treatment on AIP-TiN and TiAlN coated end-mill for high speed machining

The objective of this work is to compare the tool performance of TiN and TiAlN coated carbides end-mills deposited by an arc ion plating (AIP) method, using honing treatment to polish the cutting edge surface sleekly. The curve of surface roughness versus honing time showed a rapid improvement initially and thereafter became steady, manifesting a saturation effect. The optimal honing time related to surface roughness was determined to be approximately 20 s. As the surface roughness increased, the critical loads reduced. At an average surface roughness (R_a) of 0.028 (m, the highest critical loads of TiN and TiAlN coating layers were 98 and 114 N, respectively. Tool performances of uncoated and coated tools were conducted under high speed machining (HSM) of AISI D2 cold-worked die steel (62 HRC). Consequently, the TiAlN coated end-mill using honing treatment showed excellent tool life under HSM conditions.