感应电机无速度传感器矢量控制系统的定子电阻在线辨识

该文针对利用磁通观测器推算转子磁通的感应电机无速度传感器矢量控制系统，提出了定子电阻在线辨识法。在利用q轴磁通推算转速的基础上，该系统利用d轴磁通误差实现定子电阻在线辨识，该方案的优点是系统简单，解决了低速运行时电压模型的定子电阻变化对系统稳定性和速度控制精度的影响问题。数字仿真和实验结果验证了定子电阻在线辨识的必要性和该方案的有效性。     

Diagnosis Criterion of Abnormality of Transformer Winding by Frequency Response Analysis (FRA)

Frequency response analysis (FRA) is a powerful technique to detect internal abnormalities within power transformers. However, diagnosis criteria of power transformers by FRA have not been fully established yet. In this paper, a new evaluation method of degree of identification between two transfer functions is proposed. In the proposed method, a frequency window is employed and cross‐correlation factor is calculated with moving the window. Furthermore, the proposed method is applied to transfer functions of real transformers with or without some abnormalities. Based on this discussion, objective criteria for diagnosis of abnormalities of transformer windings by FRA are proposed. The proposed criteria are based on a few data of transformers with some abnormalities. Therefore, the proposed criteria are tentative and they would be improved by accumulation of further data.     

广色域印刷

一、广色域印刷产生的背景是什么呢: 1.时代发展的需要 当前,利用数码相机进行原稿输入的普及,喷墨打印机的广泛使用,以及随着RGB数字工作流程体系的构筑,为了适应这佯的印刷环境,使得广色域的印刷开始并将得到广泛的应用.     

Switched-capacitor discrete Fourier analyser with window function circuit

An analogue window function circuit is realized by using switched-capacitor techniques. In order to verify the effect of this window, a novel switched-capacitor analogue discrete Fourier analyser is proposed. The window function circuit is included in this analyser as the ratios of capacitances. This switched-capacitor discrete Fourier analyser is very simple in construction, namely, only two elemental circuits based on the integral feedback capacitance circuit are connected in series. Agreement between the experimental and the theoretical values is confirmed.     

A LRT Control Method Using Sensor Information in Distribution Systems with a Large Amount of PVs and EVs

It is of prime importance to maintain voltage profile within the proper range in distribution systems with a large amount of photovoltaics and electric vehicles (EVs). In particular, there is a possibility that line drop compensation (LDC) logic, which is utilized for the control of load ratio tap transformer (LRT) does not work properly when reverse power flow is included partially. Hence, in this paper, we have developed a new LRT control method based on the sensor information supposing that some section switchgears with sensors are introduced in the future distribution systems. Specifically, the extreme value of voltage profile is estimated by convergence calculation in the section between the section switchgear with sensor and LRT. Moreover, the voltage at the end node can be estimated by LDC method using sensor information of section switchgear. The proposed method was tested using a distribution system model and its effectiveness was shown.     

On the stability of an active gyrator operating at high frequencies

A basic method for obtaining a stable two-port operation of a gyrator is proposed. It can be applied in a region higher than several MHz. The circuit conditions for the stable twO-port operation are determined by a computer simulation. It is shown by experiments that the stable two–port operation can be realized at frequencies as high as 88 MHz. The present method is very useful for the design of a gyrator resonator in which the circuit parameters depend on the frequency.     

Switched-capacitor DFT and IDFT circuit

The switched-capacitor realization of the discrete Fourier transform (DFT) is treated in this paper as well as the inverse discrete Fourier transform (1DFT). The output of the DFT has a sinusoidal waveform including the amplitude and phase information of the required spectra. These spectra are given simultaneously and almost in real time. The output of the 1DFT is given merely by adding DFT outputs. Furthermore, the circuit configuration of this system-from input to DFT, from DFT to 1DFT, and from 1DFT to output-is a very simple configuration constructed by a non-recursive filter circuit.     

Integral-equation approach to parameter identification without consideration of initial conditions

The widely used integral-equation approach for identification of continuous systems is investigated. Attention is focused on the initial condition problem which has been puzzling many researchers. A new calculation procedure for the multiple integrations of the system signal derivatives is proposed and a new integral-equation approach is proposed for which the initial conditions need not be identified as unknown parameters. Therefore, the burden of the identification algorithms can be greatly reduced compared to conventional methods. Discussions on the unification of the integral-equation approach with the other methods are also provided.     

Comprehensive evaluation of new urban transportation systems by AHP

Many different kinds of transportation systems such as ‘group rapid transit’, etc., have recently been presented as ideal urban public transportation systems. When planning to introduce such a new transportation system into a city, it is necessary to select the most desirable system for that city from those that have been proposed. The comprehensive evaluation of transportation systems must reflect various aspects such as the costs of construction and maintenance and the viewpoints or both the system users and the local inhabitants. This makes it one of the most difficult and yet vitally important problems in public transportation planning. The analytic hierarchy process (AHP) developed by T. L Saaty is straightforward and has the feature that it can deal with both qualitative and quantitative factors at the same time, and it is suitable for applying to complex evaluation problems, In this paper, three transportation systems are proposed for one of the newly planned towns in Kansai Cultural and Academic Research Complexes, and a comprehensive evaluation of these systems is performed by applying the AHP. It has been proved through the process of evaluation that information which is very useful in reaching a consensus for choosing a system can be obtained.     

Deformation behaviors of magnesium alloy AZ31 sheet in cold deep drawing

To investigate how the popular magnesium alloy AZ31 sheet （aluminum 3%, zinc 1%） behaves in cold working, deep drawing experiments at room temperature, along with finite element（FE） simulation, were performed on the cold forming sheet of the AZ31 alloy after being annealed under various conditions. The activities were focused on the fracture pattern, limit drawing ratio（LDR）, deformation load, thickness distribution, anisotropic effect, as well as the influences of the annealing conditions and tool configuration on them. The results display that punch shoulder radius instead of die clearance, has much influence on the thickness distribution. The anisotropy is remarkable in cold working, which adversely impacts the LDR. The fracture often happens on the side wall at an angle to axis of the deformed specimen. The results also imply that the LDR for the material under present experimental conditions is 1.72, and annealing the material at 450 ℃ for 1 h may be preferable for the cold deep drawing.