A New Comb Circular Polarizer Suitable for Millimeter‐Band Application

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter‐band application because of its simple structure and low fabrication cost. In our experiments the dual‐band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.     

The function of bleaching earths in the processing of palm,palm kernel and coconut oils

The results presented in the literature, which attempt to elucidate the mechanisms by which triglyceride oils are bleached by earths, are reviewed. The impact of this work and how the mechanistic proposals affect changes in oil properties are considered, with particular emphasis on the needs of the palm oil processor. Important properties include color, metals and phosphorus content and oxidative stability of the oil. Investigations made in our own laboratories have been aimed at elucidating the effect of varying physical and chemical properties of the bleaching earth on the quality of bleached and deodorized oils. Techniques used in this work are pore-size distribution, surface area, scanning and transmission electron microscopy and a variety of chemical and X-ray analysis methods. The ability to vary such parameters in montmorillonite clays by alteration of process conditions to give materials with specific performance characteristics is demonstrated. Comparisons are made between acid-activated montmorillonites and other clay types.     

Ice-slurry production using direct contact heat transfer

An ice slurry generation system was developed using direct contact heat transfer between water and the coolant, Fluroinert FC-84. The location of the coolant nozzle is an important design consideration to avoid clogging due to freezing of water. An ice fraction of up to about 40 percent was obtained with the nozzle located at the bottom of the ice slurry tank and the jet directed upwards into the water. Two simplified model were developed to extract the heat transfer coefficient between the coolant drops and the water. The first model requires as input the average drop diameter and the residence time while the second model uses the measured drop diameter distribution. The estimated heat transfer coefficients are much smaller than those computed using single-sphere correlations.     

Classification and prediction of the critical heat flux using fuzzy theory and artificial neural networks

A new method to predict the critical heat flux (CHF) is proposed, based on the fuzzy clustering and artificial neural network. The fuzzy clustering classifies the experimental CHF data into a few data clusters (data groups) according to the data characteristics. After classification of the experimental data, the characteristics of the resulting clusters are discussed with emphasis on the distribution of the experimental conditions and physical mechanism. The CHF data in each group are trained in an artificial neural network to predict the CHF. The artificial neural network adjusts the weight so as to minimize the prediction error within the corresponding cluster. Application of the proposed method to the KAIST CHF data bank shows good prediction capability of the CHF, better than other existing methods.     

Groups of algebraic integers used for coding QAM signals

Linear block codes over Gaussian integers and Eisenstein integers were used for coding over two-dimensional signal space. A group of Gaussian integers with 2²ⁿ elements was constructed to code quadrature amplitude modulation (QAM) signals such that a differentially coherent method can be applied to demodulate the QAM signals. This paper shows that one subgroup of the multiplicative group of units in the algebraic integer ring of any quadratic number field with unique factorization, modulo the ideal (Pⁿ), can be used to obtain a QAM signal space of 2p^2n-2 points, where p is any given odd prime number. Furthermore, one subgroup of the multiplicative group of units in the quotient ring Z[ω]/(pⁿ) can be used to obtain a QAM signal space of 6p^2n-2 points; one subgroup of the multiplicative group of units in the quotient ring Z[i](pⁿ) can be used to obtain a QAM signal space of 4p^2n-2 points which is symmetrical over the quadrants of the complex plane and useful for differentially coherent detection of QAM signals; the multiplicative group of units in the quotient ring Z[ω]/(2ⁿ) can be used to obtain a QAM signal space of 3·2^2n-2 points, where i=√-1, ω=(-1+√-3)/2=(-1+i√3)/2, p is any given odd prime number, Z[i] and Z[ω] are, respectively, the Gaussian integer ring and the Eisenstein integer ring. These multiplicative groups can also be used to construct block codes over Gaussian integers or Eisenstein integers which are able to correct some error patterns     

Observation of magneto-thermal instabilities in (YxTm1−x)Ba2Cu3O7 single crystals in pulsed magnetic field magnetization measurements

The understanding of flux jumps in the high temperature superconductors is of importance since the occurrence of these jumps may limit the perspectives of the practical use of these materials. In this work we present the experimental study of the role of heavy ion irradiation in stabilizing the HTSC against flux jumps by comparing un-irradiated and 7.5 · 10¹⁰ Kr-ion/cm² irradiated (Y_xTm_1–x)Ba₂Cu₃O₇ single crystals. Using pulsed field magnetization measurements, we have applied broad range of field sweep rates from 0.1T/s up to 1800 T/s to investigate the behavior of the flux jumps. The observed flux jumps, which may be attributed to thermal instabilities, are incomplete and have different amplitudes. The flux jumps strongly depend on the magnetic field, on the magneto-thermal history of the sample, on the magnetic field sweep rate, on the critical current density j_c, on the temperature and on the thermal contact with the bath in which the sample is immersed.     

Hybrid pulse position modulation/ultrashort light pulse code-division multiple-access systems .I. Fundamental analysis

We propose a hybrid pulse position modulation/ultrashort light pulse code-division multiple-access (PPM/ULP-CDMA) system for ultrafast optical communications. The proposed system employs spectral CDMA encoding/decoding and PPM with very short pulse separation. The statistical properties of the encoded ULP are investigated with a general pulse model, and the performance of the proposed PPM/ULP-CDMA system is investigated. It is shown that we can improve upon the performance of other ULP-CDMA systems, such as those using on-off keying, by employing PPM. It is also shown that we can improve the performance of the proposed system by increasing the effective number of chips, by increasing the number of PPM symbols, and by reducing the ULP duration. The performance analysis shows that the aggregate throughput of the proposed PPM/ULP-CDMA system could be over 1 Tb/s.