A faster branch-and-bound algorithm for the earliness-tardiness scheduling problem

This paper addresses the one-machine scheduling problem with earliness-tardiness penalties. We propose a new branch-and-bound algorithm that can solve instances with up to 50 jobs and that can solve problems with even more general non-convex cost functions. The algorithm is based on the combination of a Lagrangean relaxation of resource constraints and new dominance rules.     

Comparative morphology of leaf epidermis in eight populations of Atlas Pistachio (Pistacia atlantica Desf., Anacardiaceae)

A comparative analysis was undertaken to conduct a micromorphological study of Pistacia atlantica leaves by comparing different populations grown under different climatic conditions. Leaf epidermis of eight wild populations was investigated under scanning electron microscope. Micromorphological characteristics (epidermis ornament, stomata type, waxes as well as trichomes) of the adaxial and abaxial leaf surfaces were examined. The epidermis ornament varied among populations and leaf surface, the abaxial leaf surface is reticulate with a striate surface. Messaad site shows a smooth uneven surface. The adaxial leaf surface is smooth but several ornamentations can be seen. The leaflet is amphistomatic; the stomata appeared to be slightly sunken. A variety of stomatal types were recorded; actinocytic and anomocytic types are the most frequent. The indumentum consisted of glandular and nonglandular trichomes. Unicellular glandular trichomes are recorded for P. atlantica leaves in this study. Their density is higher in Oued safene site, located at the highest altitude in comparison with the other populations. The wax occurred in all the sites and its pattern varied according to the populations studied, particularly between Berriane and Messaad. The morphological variability exhibited by the eight populations of P. atlantica may be interpreted as relevant to the ecological plasticity and the physiological mechanisms involved are discussed in this report.     

Research Advancement in High-Performance Polyamides and Polyamide Blends Loaded with Layered Silicate

Polyamide comprises one of the major classes of polymers. Layered silicates (nanofiller) may enhance properties of polyamide-based hybrids even at very low content. Aliphatic polyamides (nylons) have often been chosen for commercial applications because of excellent physical and chemical properties. Aromatic polyamides (aramids) and aliphatic-aromatic polyamides have been predominantly useful as high-performance materials due to stiffness, low density, and low cost. Recently polyamide blends have become an important route to high-performance materials. Binary blends of polyamide/polypropylene, polyamide/polystyrene, polyamide/polymethyl methacrylate, polyamide/polyurethane, and others have been reported for nanocomposite formation with organoclay. However, ternary blend nanocomposite with nanoclays (PA6/mSEBS, PA6/EPDM-g-MA/H-HDPE) is rarely explored.     

Adsorptive removal of nitrate and phosphate anions from aqueous solutions using functionalised SBA‐15: Effects of the organic functional group

Adsorption of nitrate and monovalent phosphate anions from aqueous solutions on mono, di‐ and tri‐ammonium‐functionalised mesoporous SBA‐15 silica was investigated. The adsorbents were prepared via a post‐synthesis grafting method, using either 3‐aminopropyltrimethoxysilane (N‐silane) or [1‐(2‐aminoethyl)‐3‐aminopropyl]trimethoxysilane (NN‐silane) or 1‐[3‐(trimethoxysilyl)‐propyl]‐diethylenetriamine (NNN‐silane), followed by acidification in HCl solution to convert the attached surface amino groups to positively charged ammonium moieties. The nominal loading of amino moieties on the SBA‐15 surface was varied from 5% to 20% as organoalkoxysilane/silica molar ratio. The adsorption experiments were conducted batchwise at room temperature. Results showed that adsorption capacity increased with increasing the concentration of monoammonium groups on the SBA‐15 adsorbent. Nitrate adsorption capacity increased from 0.34 to 0.66 mmol ${\rm NO}_{3}^{{-} } /{\rm g}$ adsorbent while phosphate adsorption capacity increased from 0.34 to 0.63 mmol ${\rm H}_{2} {\rm PO}_{4}^{{-} } /{\rm g}$ adsorbent when the molar ratio organoalkoxysilane/silica was varied from 5% to 20%, respectively. Also, for the same organoalkoxysilane/silica molar ratio of 10%, the adsorption capacity increased with the increase of the number of protonated amines in the functional groups. Therefore, maximum adsorption capacities of 0.80, 1.16 and 1.38 mmol ${\rm NO}_{3}^{{-} } /{\rm g}$ adsorbent and 0.72, 0.82 and 1.17 mmol ${\rm H}_{2} {\rm PO}_{4}^{{-} } /{\rm g}$ adsorbent were obtained using mono‐, di‐ and triammonium functionalised SBA‐15 adsorbents, respectively. © 2011 Canadian Society for Chemical Engineering     

Overview on Polystyrene/Nanoclay Composite: Physical Properties and Application

This article reviews the research and progress on polystyrene and nanoclay-based nanocomposite. Polystyrene is one of the most extensively used commercial polymers in the world. This review is designed to be an expansive source for polystyrene–clay nanocomposite research, including synthesis, characterization, structure/property relationship, manufacturing techniques, and applications considering thermal, mechanical, barrier, electrical conductivity, non-flammability, and biodegradability. The frequently used clays with polystyrene are montmorillonite, bentonite, hectorite, and kaolinite. The polystyrene–clay nanocomposite has several interesting commercial significances in packaging, automotive, fuel cell, construction, and electrical materials. Finally, future challenges toward the technical applications of these advance materials have been discussed.     

WIRE3: Driving Around the Information Super-Highway

Interactive voice browsers offer an alternative paradigm that affords ubiquitous mobile access to the WWW using a wide range of consumer devices. This technology can facilitate a safe, “hands-free” browsing environment that is of importance both to car drivers and various mobile and technical professionals. This paper describes the challenges of architecting an interactive voice browser that combines digital audio with the features of a speech synthesizer to make structural elements of the document explicit to the listener. The aesthetics of the audio rendition can simultaneously help reduce the monotony factor and enhance comprehension. The evolution of the voice browser gave rise to a new conceptual model of the HTML document structure and its mapping to a 3D audio space. A number of novel features are discussed for improving both the user’s comprehension of the HTML document structure and their orientation within it. These factors, in turn, can improve the effectiveness of the browsing experience.     

Growth and characterization of Ni:DLC composite films using pulsed laser deposition technique

The structure and surface morphology of Ni-incorporated diamond like carbon (Ni:DLC) films have been investigated. These films were deposited on Si substrates using pulsed laser deposition (PLD) technique. A KrF Excimer laser (λ = 248 nm) was used for co-ablation from multi component Ni–graphite target. The concentration of Ni was varied by ablating the Ni part of the target with various numbers of laser pulses. The SEM and AFM analysis reveals that the surface is composed of segregates of Ni which increases with the increase in Ni content during the growth process. The structural investigations by XRD and Raman spectroscopy provided information about the orientation of the incorporated constituent and the ordering of the carbon species. Maximum height of the nano structures which were observed on the surface was ∼50 nm. The G-peak of the graphite was shifted towards higher wave number due to enhancement in SP² sites which have been increased due to the increase in the Ni concentration. A small change in the surface roughness ranging from 7.78 nm to 13.1 nm due to increased Ni concentration was also observed.     

Enhancement of solar cells parameters by periodic nanocylinders

Optical absorption in thin-film solar cells can be improved by using surface plasmons for guiding and confining the light on the nanoscale. We report theoretical and simulation studies of a-Si thin-film solar cells with silver nanocylinders on the surface. We found that surface plasmons increased the cells'' spectral response over almost the entire studied solar spectrum. In the ultraviolet range and at wavelengths close to the Si band gap we observed a significant enhancement of the absorption for both thin-film and wafer-based structures. We also performed optimization studies of particle size, inter-particle distance, and dielectric environment, for obtaining maximal absorption within the substrate. A blue-shift of the resonance wavelength with increasing inter-particle distance was observed in the visible range. Cell performance improved at optimal spacing, which strongly depended on the nanoparticle size. Increasing the nanocylinder size was accompanied by the widening of the plasmon resonance band and a red-shift of the plasmon resonance peaks. A weak red-shift and plasmon peak enhancement were observed in the reflectance curve with increasing refractive index of the dielectric spacer.     

Toluene depletion in produced oil contributes to souring control in a field subjected to nitrate injection

Souring in the Medicine Hat Glauconitic C field, which has a low bottom-hole temperature (30 °C), results from the presence of 0.8 mM sulfate in the injection water. Inclusion of 2 mM nitrate to decrease souring results in zones of nitrate-reduction, sulfate-reduction, and methanogenesis along the injection water flow path. Microbial community analysis by pyrosequencing indicated dominant community members in each of these zones. Nitrate breakthrough was observed in 2-PW, a major water- and sulfide-producing well, after 4 years of injection. Sulfide concentrations at four other production wells (PWs) also reached zero, causing the average sulfide concentration in 14 PWs to decrease significantly. Interestingly, oil produced by 2-PW was depleted of toluene, the preferred electron donor for nitrate reduction. 2-PW and other PWs with zero sulfide produced 95% water and 5% oil. At 2 mM nitrate and 5 mM toluene, respectively, this represents an excess of electron acceptor over electron donor. Hence, continuous nitrate injection can change the composition of produced oil and nitrate breakthrough is expected first in PWs with a low oil to water ratio, because oil from these wells is treated on average with more nitrate than is oil from PWs with a high oil to water ratio.