Trade-offs in cycle time management: hot lots

In manufacturing, higher priority is given to hot lots to reduce their cycle time. The impact of hot lots on the cycle time of other lots in the system is studied here. Object-oriented simulation experiments of a wafer fabrication model were run to investigate the above impact. The simulation results showed that as the proportion of hot lots in the work-in progress increases, both the average cycle time and the corresponding standard deviation for all other lots increase dramatically. Thus, it is argued that hot lots induce either a deterioration in service level for regular lots or an increase in inventory costs. Sound management accounting would require that these costs be estimated, possibly using an approach outlined here     

Plasma Internal Inductance in the Presence of External Resonant Fields in IR-T1 Tokamak

In this paper we presented experimental investigation of effects of local limiter biasing (V_biasing = +200 v, V_biasing = +320 v) on the plasma parameters as plasma current, loop voltage, poloidal beta, plasma pressure, plasma energy, plasma resistance, plasma temperature, plasma displacement, Shafranov parameter and plasma internal inductance in IR-T1 tokamak. For these purposes, array of magnetic probes and also a diamagnetic loop have been used. The results show that applied biased voltage V_biasing = +200 v causes to decrease of about 40 % in plasma internal inductance. The plasma resistance and the plasma displacement have been decreased by V_biasing = +200 v. The main result of the application of V_biasing = +200 v is flatting the plasma parameters profiles. In other words, the addition of biasing voltage V_biasing = +200 v to plasma could be effective for improving the quality of tokamak plasma discharge by creating the steady state plasma. The plasma current, plasma pressure, plasma energy, plasma temperature and shift parameter have increased after the application of limiter biasing with V_biasing = +320 v but they decrease rapidly.     

Castor oil-based polyurethane coatings containing benzyl triethanol ammonium chloride: synthesis,characterization, and biological properties

In the present work, benzyl triethanol ammonium chloride (BTEAC) was employed as a reactive bactericidal additive for preparing of polyurethane coatings. In this regard, castor oil as a renewable resource-based polyol, polyethylene glycol (PEG1000), and BTEAC were reacted with toluene diisocyanate. Physical, mechanical, and thermal characteristics as well as biocompatibility and antibacterial properties of polyurethanes were evaluated. The prepared polyurethanes showed two-phase structure with soft and hard segments glass transition temperature transitions in the range of 18–70 and 85–153 °C, respectively. Initial modulus and tensile strength were improved for coatings with higher BTEAC content, while elongation at break and thermal stability were decreased. Hydrophilicity of coatings was increased for polyurethanes based on higher content of BTEAC and PEG1000. Polyurethanes with higher BTEAC content showed better cytocompatibility for mouse L929 fibroblast cells. Moreover, coatings with higher hydrophilicity and BTEAC content displayed superior antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria.     

Palladium nanoparticles as reusable catalyst for the synthesis of N-aryl sulfonamides under mild reaction conditions

An efficient palladium nanoparticles-catalyzed N-arylation of sulfonamides and sulfonyl azides is described. This procedure serves as an active protocol for intermolecular C–N bond formation using Pd(OAc)₂ in PEG-400 under air. Aryl bromides and triflates react at 35°C, while aryl chlorides require heating to 50°C and give the desired products only in low yields. This reaction proceeds smoothly in acceptable yields using low catalyst loading.     

Modified carbon paste electrodes for Cu(II) determination

A new Cu²⁺ carbon paste electrode (CPE) using 2,2′-(1E,1′E)-1,1′-(2,2′-azanediylbis (ethane-2,1-diyl)bis(azan-1-yl-1-ylidene))bis(ethan-1-yl-1-ylidene)diphenol (ADEZEDP) has been prepared. The influence of variables including sodium tetraphenylborate (NaTPB), ionophore, and amount of multiwalled carbon nanotubes (MWCNT), CdO nanowires, CdS nanoparticles and palladium nanoparticles loaded on ADEZEDP and Nujol on the electrodes response were studied and optimized. At optimum values of all variables, for each nanomaterial the electrode response was linear in concentration range of 1.0 × 10^? 8 to 1.0 × 10^? 1 mol L^? 1 for ADEZEDP with Nernstian slope. The good performance of electrode viz. Wide applicable pH range (2.0–5.0), fast response time (≈ 6 s), and adequate life time (3 months) indicate the utility of the proposed electrodes for evaluation of Cu²⁺ ion content in various situations. Finally, these electrodes have been successfully applied for the determination of Cu²⁺ ions content in various real samples. The selectivity of proposed electrode was evaluated by separation solution method and fixed interference method.     

Effect of sodium selenite on the bacteria growth,selenium accumulation,and selenium biotransformation in <Emphasis Type="Italic">Pediococcus acidilactici</Emphasis>

In this study, the effect of low selenium concentrations on bacteria growth, selenium bioaccumulation, and selenium speciation in Pediococcus acidilactici was investigated. Six different sodium selenite (Na₂SeO₃) solutions with concentrations of 0, 0.5, 1, 2, 3, and 4 mg/L were added in MRS broth for 24 h. Then, the obtained bacterial pellets were weighed. The contents of total selenium and selenium species in the bacterial pellets were measured via optimized enzymatic hydrolysis and HPLC-ICP-MS. The maximum dried P. acidilactici biomass of 1.44 g/L was achieved by utilizing 1 mg/L Na₂SeO₃. By increasing sodium selenite concentrations, total selenium contents were significantly increased from 0.14 to 1.45 mg/g dry weight (p < 0.05). The findings indicated that selenium was favorably incorporated into the bacteria protein fraction and mainly formed selenocysteine. Therefore, selenium-enriched lactic acid bacterium P. acidilactici can deliver a less-toxic, more bioavailable selenium source for human and animal nutrition.     

A green,chemoselective, and efficient protocol for Paal–Knorr pyrrole and bispyrrole synthesis using biodegradable polymeric catalyst PEG-SO3H in water

In water and in the presence of 1 mol % of Poly(ethylene glycol)-bounded sulfonic acid, amines undergo smooth condensation with 2,5-hexadione at room temperature to afford the corresponding pyrroles in good to excellent yields. The sole products were solidified as the reaction proceeded and separated by simple filtration. In addition, bispyrroles were synthesized in excellent yields via this eco-friendly protocol. The method is easy, simple, cost-effective, chemoselective, and environmentally benign that introduces a beautiful example of click chemistry in water. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Modification of poly acrylic acid using calix[4]arene derivative for the adsorption of toxic heavy metals

Poly acrylic acid (PAA) was grafted with p‐t‐butyl calix[4]arene diamine (distal cone) (2) to adsorb toxic heavy metal and alkali metal cations. The grafting method includes the amidation reaction of PAA with calixarene diamine derivative 2 which was carried out in N,N‐dimethylformamide (DMF) and N–methyl‐2‐pyrrolidone (NMP) as solvents. The modified PAAs (PAA‐C1 and PAA‐C2) were characterized by FTIR, ¹H‐NMR, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). PAA‐C1 and PAA‐C2 were used to evaluate the sorption properties of some toxic heavy metal cations (Co²⁺, Cu²⁺, Cd²⁺, Hg²⁺), alkali metal cations (Na⁺, K⁺, Cs⁺), and Ag⁺. Results showed that the modified PAAs were good sorbents for heavy metal and alkali metal cations. The main goal of this project is to design hydrophobically modified PAA that is suitable for ion selective membranes and chemical sensor devices for adsorption of toxic heavy metals. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010