Low‐temperature synthesis of hierarchical structures of copper oxide and their superior biological activity

In this work, the authors report a facile low‐temperature wet‐chemical route to prepare morphology‐tailored hierarchical structures (HS) of copper oxide. The preparation of copper oxide collides was carried out using varying concentrations of copper acetate and a reducing agent at a constant temperature of 50°C. The prepared HS of CuO were characterised by powdered X‐rays diffraction that indicates phase pure having monoclinic structures. The morphology was further confirmed by field‐emission scanning electron microscope. It reveals a difference in shape and size of copper oxide HS by changing the concentration of reactants. In order to evaluate the effect of H₂ O₂ on CuO NPs, the prepared CuO are modified by treatment with H₂ O₂. In general trend, CuOH₂ O₂ collide showed enhanced protein kinase inhibition, antibacterial (maximum zone 16.34 mm against Staphylococcus aureus) and antifungal activities in comparison to unmodified CuO collides. These results reveal that CuO HS exhibit antimicrobial properties and can be used as a potential candidate in pharmaceutical industries.Inspec keywords: molecular biophysics, antibacterial activity, X‐ray diffraction, microorganisms, copper compounds, nanofabrication, nanoparticles, narrow band gap semiconductors, field emission scanning electron microscopy, enzymes, nanomedicine, particle size, semiconductor growthOther keywords: unmodified CuO collides, low‐temperature synthesis, morphology‐tailored hierarchical structures, copper acetate, reducing agent, monoclinic structures, copper oxide HS, CuO NPs, Staphylococcus aureus, biological activity, copper oxide, powdered X‐ray diffraction, field‐emission scanning electron microscopy, facile low‐temperature wet‐chemical method, protein kinase inhibition, antibacterial activity, antifungal activity, antimicrobial properties, pharmaceutical industries, temperature 50.0 degC, CuO     

Combined effect of microwave and ultrasonication treatments on the quality and stability of sugarcane juice during cold storage

The main objective of this study was to investigate the combined effect of microwave (MW) treatment (2450 MHz for 120 s), ultrasonication (US) (24 KHz, 20 °C for 20 min) and combined treatment (MW-US) on the quality and stability of sugarcane juice (SCJ) during 21 days of storage at 4 °C. The effect of the treatments and storage time on physicochemical, bioactive compounds (total phenolic, flavonoids and ascorbic acid content) and microbial analysis of SCJ. No significant (P < 0.05) changes were observed in °Brix, while there was an increase in pH and a decrease in titratable acidity in all treatments. Compared to US and MW, MW-US treatments was more effective in preserving colour attributes, total phenolic and flavonoids contents, ascorbic acid and antioxidant capacities of the SCJ during storage. The results regarding the microbial count indicate that more microbial safety and longer shelf life was achieved by MW-US. MW-US treatment is an effective technology for improving the safety and shelf life of SCJ by minimising quality changes, retaining bioactive compounds and reducing microbial growth during storage.     

Novel inorganic precursors [Co4.32Zn1.68(HCO2)18(C2H8N)6]/SiO2 and Co4.32Zn1.68(HCO2)18(C2H8N)6]/Al2O3 for Fischer–Tropsch synthesis

The silica- and alumina-supported Co–Zn catalysts were synthesized by thermal decomposition of new inorganic precursors [Co_4.32Zn_1.68(HCO₂)₁₈(C₂H₈N)₆]/SiO₂ or Al₂O₃. A novel coordination polymer formulated as [Co_4.32Zn_1.68(HCO₂)₁₈(C₂H₈N)₆] (1) was prepared using the solvothermal technique and characterized by elemental analysis, FT-infrared spectroscopy. Thermal stability of the complex 1 was investigated by thermogravimetric analysis and differential scanning calorimetry, and its structure was determined by single-crystal X-ray diffraction. Characterization of catalysts was carried out using powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and BET specific surface area. The catalysts were evaluated for Fischer–Tropsch synthesis (FTS) in the temperature range 200–300 °C. The results revealed that the synthesized catalysts have higher selectivity to the desired products at 260 °C. The performance of the catalysts was compared to those of catalysts constructed via impregnation method and the fabricated catalysts show higher activity and selectivity than the reference catalysts.     

The effects of food essential oils on cardiovascular diseases: A review

Essential oils (EO) are complex secondary metabolites, which are produced by aromatic plants and identified by their powerful odors. Present studies on EO and their isolated ingredients have drawn the attention of researchers to screen these natural products and evaluate their effect on the cardiovascular system. Some EO, and their active ingredients, have been reported to improve the cardiovascular system significantly by affecting vaso-relaxation, and decreasing the heart rate and exert a hypotension activity. Several mechanisms have been proposed for the role of EO and their main active components in promoting the health of the cardiovascular system. The objective of this review is to highlight the current state of knowledge on the functional role of EO extracted from plants for reducing the risk of cardiovascular diseases and their mechanisms of action. Research on EO has the potential to identify new bioactive compounds and formulate new functional products for the treatment of cardiovascular diseases such as arterial hypertension, angina pectoris, heart failure, and myocardial infarction.     

The effects of encoding task on age-related differences in the functional neuroanatomy of face memory.

Age-related differences in brain activity mediating face recognition were examined using positron emission tomography. Participants encoded faces using a pleasant-unpleasant judgement, a right-left orientation task, and intentional learning. Scans also were obtained during recognition. Both young and old groups showed significant effects of encoding task on recognition accuracy, but older adults showed reduced accuracy overall. Increased brain activity in older adults was similar to that seen in young adults during conditions associated with deeper processing, but was reduced during the shallow encoding and recognition conditions. Differential correlations of brain activity and behavior were found that suggest older adults use unique neural systems to facilitate face memory. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Abrasive water jet machining and mechanical behavior of banyan tree saw dust powder loaded polypropylene green composites

Banyan tree saw dust powder (BSD) filled Polypropylene (PP) green composites have been fabricated with varying amounts viz., 0%, 20%, and 40% of BSD particulate filler by using a co‐rotating twin screw extruder followed by injection molding. The mechanical properties such as surface hardness, tensile behavior, and impact strength of the fabricated PP/BSD green composites have been studied in order to standardize the composites. Abrasive water jet (AWJ) machining has been reported mainly for ceramics, concrete, and glass but not much literature is available on AWJ machining of polymer composites. This research is aimed at examining the AWJ machining of green polymer composites. The effect of BSD loading on the AWJ machining behavior of the PP/BSD green composites has been investigated. Furthermore, the effect of addition of 4% maleic anhydride grafted PP (coupling agent) and 4% talc (mineral filler) on the machining behavior of PP/BSD composites has also been evaluated. Surface roughness and optical micrographs of the AWJ cut composite specimens were examined to assess the effect of BSD content, AWJ traverse speed and pressure on the machining behavior of the composites. In order to probe the mechanism of AWJ machining behavior of PP/BSD composites, the kerf width and taper have been measured and results are correlated. POLYM. COMPOS., 37:1754–1764, 2016. © 2014 Society of Plastics Engineers     

Determination of surface-induced platelet activation by applying time-dependency dissipation factor versus frequency using quartz crystal microbalance with dissipation

Platelet adhesion and activation rates are frequently used to assess the thrombogenicity of biomaterials, which is a crucial step for the development of blood-contacting devices. Until now, electron and confocal microscopes have been used to investigate platelet activation but they failed to characterize this activation quantitatively and in real time. In order to overcome these limitations, quartz crystal microbalance with dissipation (QCM-D) was employed and an explicit time scale introduced in the dissipation versus frequency plots (Df–t) provided us with quantitative data at different stages of platelet activation. The QCM-D chips were coated with thrombogenic and non-thrombogenic model proteins to develop the methodology, further extended to investigate polymer thrombogenicity. Electron microscopy and immunofluorescence labelling were used to validate the QCM-D data and confirmed the relevance of Df–t plots to discriminate the activation rate among protein-modified surfaces. The responses showed the predominant role of surface hydrophobicity and roughness towards platelet activation and thereby towards polymer thrombogenicity. Modelling experimental data obtained with QCM-D with a Matlab code allowed us to define the rate at which mass change occurs (A/B), to obtain an A/B value for each polymer and correlate this value with polymer thrombogenicity.     

Theoretical framework for estimating a product's reliability using a variable‐amplitude loading spectrum and a stress‐based approach

An innovative approach for predicting the reliability of a structure that is subject to a variable‐amplitude dynamic load is presented. In this approach, a Gassner durability curve with its scatter is modelled using a 2‐parametric Weibull's probability density function (PDF). The trend of the Gassner durability curve is modelled with a general hyperbola equation in a log‐log scale. The hyperbola equation is applied to represent the durability curve for the 63.2% probability of fatigue failure that describes the dependency of the Weibull's scale parameter on the loading spectrum's maximum stress. Equations are derived to link the parameters of the hyperbola curve to the material's S‐N curve and the loading spectrum. The Weibull's shape parameter is estimated from the scatter of the material's S‐N curve. The proposed Gassner‐curve model is applied to calculate the fatigue reliability from the PDF of the loading spectrum's maximum stress and the PDF of the durability‐curve's amplitude stress for the selected number of loading‐cycles‐to‐failure.     

Tensile rupture of short fibre filled thermoplastic elastomer

Tensile rupture in short silk fibre filled thermoplastic elastomer blends from low-density polyethylene and natural rubber (NR) containing pre-cuts of different lengths has been studied. _b, the tensile strength of the blends, was found to decrease with increase in the cut length in accordance with the Griffith's theory of fracture. However, unlike in the case of vulcanized NR, no critical cut length (at which the strength drops abruptly) was found in the case of both blends and unvulcanized NR. The energy to fracture per unit volume,W _b, also varied inversely with the length of the pre-cut. Values of inherent flaw size,I _O, of the composites, determined by extrapolation ofW _b to the value obtained when no initial pre-cut was present, were found to increase with fibre loading. Blends with longitudinally oriented fibres showed higherI _O values than those with transversely oriented fibres.     

Cottonseed,protein and oil yields and oil properties as affected by nitrogen and phosphorus fertilization and growth regulators

Two experiments were carried out at our research center during the 1981 and 1982 seasons on cotton cultivar Giza 75 (Gossypium barbadense L.) to investigate the influence of nitrogen fertilization rates (72, 144 or 216 kg/ha.), phosphorus levels (36 or 72 kg P₂O₅/ha.) and three growth regulators (IAA, IBA or NAA) applied to cotton plants at 10 ppm and sprayed three times (70, 85 and 100 days after sowing) on protein and oil yields, and oil properties. A randomized complete block design with four replications treatment combinations was used. The combined analysis of the results of the two seasons revealed that yields of cottonseed, oil and protein increased by raising nitrogen and phosphorus levels and under the application of growth regulators. Seed index increased by raising the added nitrogen and the applied growth regulants. No detectable effect of phosphorus levels was observed. The seed oil percentage decreased, although the protein percentage increased, when the nitrogen application rate was raised. Application of growth regulators and a high phosphorus level increased the seed oil percentage, but the seed protein percentage was not affected. The seed oil properties, i.e., acidity, saponification and iodine values, tended to decrease slightly by increasing the nitrogen application rate and the application of growth substances, but the trend reversed when the phosphorus level was raised. The mean values of oil specific gravity and refractive index did not show any definite responses.