In-tube condensation of mixture of R134a and ester oil: empirical correlations

This paper presents a comparative study of the condensation heat transfer coefficients in a smooth tube when operating with pure refrigerant R134a and its mixture with lubricant Castrol “icematic sw”. The lubricant is synthetic polyol ester based oil commonly used in lubricating the compressors. Two concentrations of R134a-oil mixtures of 2% and 5% oil (by mass) were analysed for a range of saturation temperatures of refrigerant R134a between 35 °C and 45 °C. The mass flow rate of the refrigerant and the mixtures was carefully maintained at 1 g/s, with a vapour quality varying between 1.0 and 0. The effects of vapour quality, flow rate, saturation temperature and temperature difference between saturation and tube wall on the heat transfer coefficient are investigated by analysing the experimental data. The experimental results were then compared with predictions from earlier models [Int J Heat Mass Transfer (1979), 185; 6th Int Heat Transfer Congress 3 (1974) 309; Int J Refrig 18 (1995) 524; Trans ASME 120 (1998) 193]. Finally two new empirical models were developed to predict the two-phase condensation heat transfer coefficient for pure refrigerant R134a and a mixture of refrigerant R134a with Castrol “icematic sw”.     

Modeling of Diffusion in Capillary Porous Materials During the Drying Process

This paper presents a model of heterogenous diffusion in capillary porous materials during the process of drying. The governing heat and mass transfer equations have been established using the liquid as well as vapor flow. Two models have been presented. Model 1 does not consider the heat conduction while the model 2 has been established by considering the conduction. The developed models and the numerical solutions of the resulting differential equations can take into account the moisture and temperature dependent thermophysical properties of the product. All equations have been established in spherical coordinates but the programme written for the purpose of calculations can be used for other geometries also. Numerical calculations have been performed for gas concrete and tiles using model 1, while model 2 has been used for gas concrete only because of the lack of data for thermophysical properties of the tile. For gas concrete it was seen that conduction has only marginal effect on the drying process and the numerical predictions of the drying process were reasonably accurate.     

Modeling and optimization of fringe capacitance of nanoscale DGMOS devices

We analyze the impact of gate electrode thickness and gate underlap on the fringe capacitance of nanoscale double-gate MOS (DGMOS) transistors. We propose an analytical fringe capacitance model considering gate underlap and finite source/drain length. A comparison with the simulation results show that the model can accurately estimate the fringe capacitance of the device. We show that an optimum gate underlap can significantly reduce the fringe capacitance resulting in higher performance and lower power consumption. Also, the effects of process variation in gate underlap devices are discussed. Simulation results on a three-stage ring oscillator show that with optimum gate underlap 32% improvement in delay can be achieved.     

Three-phase self-excited induction generators: an overview

Induction generators are increasingly being used in nonconventional energy systems such as wind, micro/mini hydro, etc. The advantages of using an induction generator instead of a synchronous generator are well known. Some of them are reduced unit cost and size, ruggedness, brushless (in squirrel cage construction), absence of separate dc source, ease of maintenance, self-protection against severe overloads and short circuits, etc. In isolated systems, squirrel cage induction generators with capacitor excitation, known as self-excited induction generators (SEIGs), are very popular. This paper presents an exhaustive survey of the literature over the past 25 years discussing the process of self-excitation and voltage buildup, modeling, steady-state, and transient analysis, reactive power control methods, and parallel operation of SEIG.     

Comparison of the periodic solution method with TRNSYS and SUNCODE for thermal building simulation

Based on periodic solutions of the governing heat conduction equations in a single zone building, computer software ADMIT has been developed for thermal simulation of buildings. Standard computer software, namely TRNSYS and SUNCODE, have also been used to simulate the same building under similar conditions. Simulations have been performed for three different climatic zones in India for light and heavy constructions under conditions of glazed/unglazed areas and ventilation rates. The results are presented in terms of the hourly variation of the room temperature. For insulated heavy construction, the results of different models are significantly different. This difference is due to the use of different approaches to solve the heat conduction equations. SUNCODE depends on the RC network approach and underestimates the heat losses. TRNSYS uses the transfer function approach, which is sensitive to the initially assumed value of the room temperature. ADMIT represents a quasi-steady-state periodic variation and is not suitable for transient variations. For insulated light buildings, the heat transfer mechanisms used in the mathematical models are not the governing factors. The models also differ in treating the penetration of solar radiation through a glazed window and the subsequent heat-transfer mechanism. For a south window and air changes in an insulated building, the results obtained by SUNCODE and ADMIT are in good agreement, but the results obtained by TRNSYS are considerably different. The reason for this needs detailed analysis.     

Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.     

Experimental validation of FE predicted fracture behaviour in thermally sprayed coatings

The fracture behaviour of a brittle coating on a substrate is not only governed by its intrinsic fracture strength, but also by a range of other parameters. In order to be able to understand (and thus predict) the fracture response, it is very important to accurately determine the key coating properties such as elastic modulus, residual stresses and fracture strength. In the present work, the fracture behaviour of three different high velocity oxy-fuel (HVOF) sprayed WC–17% Co coatings on Ti–6Al–4V substrates was studied using four-point bending with the acoustic emission technique. The key coating properties were determined experimentally and finite element (FE) models incorporating these experimentally measured properties were used to predict the cracking behaviour. It was found that the FE model was able to predict the differences in the fracture responses of the three coating types based upon differences in their mechanical properties, which in turn enabled the properties which dominate the fracture response to be identified. Moreover, the ability to predict the fracture behaviour of the coatings provided validation of the physical basis of the FE model.     

CARD: A Contact-based Architecture for Resource Discovery in Wireless Ad Hoc Networks

Traditional protocols for routing in ad hoc networks attempt to obtain optimal or shortest paths, and in doing so may incur significant route discovery overhead. Such approaches may be appropriate for routing long-lived transfers where the initial cost of route discovery may be amortized over the life of the connection. For short-lived connections, however, such as resource discovery and small transfers, traditional shortest path approaches may be quite inefficient. In this paper we propose a novel architecture, CARD, for resource discovery in large-scale wireless ad hoc networks. Our mechanism is suitable for resource discovery as well as routing very small data transfers or transactions in which the cost of data transfer is much smaller than the cost of route discovery. Our architecture avoids expensive mechanisms such as global flooding and complex hierarchy formation and does not require any location information. In CARD resources within the vicinity of a node, up to a limited number of hops, are discovered using a proactive scheme. For resources beyond the vicinity, each node maintains a few distant nodes called contacts. Contacts help in creating a small world in the network and provide an efficient way to query for distant resources. Using contacts, the network view (or reachability) of the nodes increases, reducing the discovery overhead and increasing the success rate. On the other hand, increasing the number of contacts also increases control overhead. We study such trade-off in depth and present mechanisms for contact selection and maintenance that attempt to increase reachability with reduced overhead. Our schemes adapt gracefully to network dynamics and mobility using soft-state periodic mechanisms to validate and recover paths to contacts. Our simulation results show that CARD is scalable and can be configured to provide desirable performance for various network sizes. Comparisons with other schemes show overhead savings reaching over 93% (vs. flooding) and 80% (vs. bordercasting or zone routing) for high query rates in large-scale networks.