Making friends in online games: gender differences and designing for greater social connectedness

ABSTRACT

While online multiplayer games provide an opportunity for players to both maintain and establish new connections, male and female players have been found to experience these environments differently. Interviews (n?=?22) and focus groups (n?=?14) were used to explore these differences as they impact on creating new social connections, as well as to provide recommendations for the development of new social tools and features that account for these differences. While all participants experienced toxicity and performance pressure as barriers to forming new connections, female players uniquely reported the impacts of misogynistic targeting and stereotype threat. In turn, female players wishing to avoid these stresses would often mask their gender. The common practice of gender misrepresentation by both male and female players impacted female players’ ability to create social connections through voice technology, as well as building their distrust of unknown others. Recommendations are made to build social connectedness between players taking into account the specific constraints faced by female players. These include establishing mentoring opportunities as well as profiling players beyond their immediate skill or rank. Additionally, the desire for control of one’s online identity presents practical challenges that may be overcome through thoughtful design.     

Single image super resolution based on sparse representation using discrete wavelet transform

Multimedia Tools and Applications - Single image super resolution (SR) based on sparse representation is a promising technique where the SR problem is solved by searching for the most robust...     

Zinc Oxide Nanowire Decorated Single‐Use Electrodes for Electrochemical DNA Detection

The surfaces of pencil graphite electrodes (PGEs) were decorated with zinc oxide nanowires (ZnO NWs) for the electrochemical detection of nucleic acids. ZnO NWs were synthesized through simple hydrothermal method. PGEs decorated with ZnO NWs (ZnO NW/PGEs) were electrochemically characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) following morphological characterization through transmission (TEM) and scanning electron microscopy (SEM). Enhanced sensor response obtained using ZnO NW/PGEs contrary to the bare PGE (control) samples. Our preliminary results simply reveal the potential of combining ZnO NWs with disposable sensor technology for the electrochemical detection of DNA.     

Solids transport models comparison and fine‐tuning for horizontal,low concentration flow in single‐phase carrier fluid

We determined and fine‐tuned the solids transport models appropriate for predicting the single‐phase carrier fluid velocity to transport solid particles in conduits for horizontal, low concentration flow. A database with 538 experimental data points was compiled. A literature review was performed to determine the data ranges, forces, and mechanisms used to develop 44 models, and their velocity predictions were compared against the database using statistics. Using the dimensionless forms of the models and the data, the model parameters were adjusted to improve their accuracy and identify the dominant forces. At low concentrations: for liquid/solid flow from a bed of solids and gas/solid flow from the bottom of pipelines, the particle weight, and inertial and viscous forces dominate; for gas/solid flow from a bed of solids, the particle weight, and inertial, viscous, and adhesive forces play a role; and gaps exist in the data for large‐diameter pipes and high‐density gases. © 2013 American Institute of Chemical Engineers AIChE J, 60: 76–122, 2014     

Random forest-based tuberculosis bacteria classification in images of ZN-stained sputum smear samples

In this paper, we present a robust hybrid watermarking method applied to color images for authentication, which presents robustness against several distortions. Due to the different nature of common signal processing and geometrical attacks, two different techniques for embed a same watermark are used in this method. In the first one, the luminance component (Y) information is used to embed the watermark bit sequence into the magnitude of the middle frequencies of the Discrete Fourier Transform (DFT). In the second one, a selected region of 2D histogram composed by blue-difference and red-difference (Cb–Cr) chrominance components is modified according to the watermark bit sequence. The quality of the watermarked image is measured using the following well-known indices peak signal to noise ratio (PSNR), visual information fidelity (VIF) and structural similarity index (SSIM). The difference color of the watermarked image is obtained using the normalized color difference (NCD) measure. The experimental results show that the proposed method provides robustness against several geometric distortions, signal processing operations, combined distortions and photo editing. The comparison with the previously reported methods based on different techniques is also provided.     

Assessment of technological attributes of autochthonous starter cultures in Turkish dry fermented sausage (sucuk)

The study aims to evaluate the technological properties of autochthonous strains (Lactobacillus sakei S15, Lactobacillus plantarum S24, L. plantarum S91, Pediococcus pentosaceus S128b and Staphylococcus carnosus G109) in Turkish dry fermented sausage (sucuk). After 24 h of fermentaPtion, all lactic acid bacteria strains reduced the pH to below 5.0, while the pH in the control group was above 5.3. The number of lactic acid bacteria strains reached 10⁸–10⁹ cfu g⁻¹ during fermentation. Staphylococcus carnosus G109 remained at the inoculation level of 10⁶ cfu g⁻¹ during ripening. Lactobacillus sakei S15 as mono-culture showed higher TBARS values compared to other strains. The control group had the lowest L* value and autochthonous strains caused no significant difference for a* value. According to principal component analysis results, most volatile compounds were positively correlated with the group containing only L. sakei S15.     

Characterization of Double-Junction GaAsP Two-Color LED Structure

The structural, optical, electrical and electrical–optical properties of a double-junction GaAsP light-emitting diode (LED) structure grown on a GaP (100) substrate by using a molecular beam epitaxy technique were investigated. The p–n junction layers of GaAs_1?xP_x and GaAs_1?yP_y, which form the double-junction LED structure, were grown with two different P/As ratios. High-resolution x-ray diffraction (HRXRD), photoluminescence (PL), and current–voltage (I–V) measurements were used to investigate the structural, optical and electrical properties of the sample. Alloy composition values (x, y) and some crystal structure parameters were determined using HRXRD measurements. The phosphorus compositions of the first and second junctions were found to be 63.120% and 82.040%, respectively. Using PL emission peak positions at room temperature, the band gap energies (E_g) of the first and second junctions were found to be 1.867 eV and 2.098 eV, respectively. In addition, the alloy compositions were calculated by Vegard’s law using PL measurements. The turn-on voltage (V_on) and series resistance (R_s) of the device were obtained from the I–V measurements to be 4.548 V and 119 Ω, respectively. It was observed that the LED device emitted in the red (664.020 nm) and yellow (591.325 nm) color regions.     

WiSEGATE: Wireless Sensor Network Gateway framework for internet of things

With internet of things vision, computing systems get the ubiquity of real world. Wireless Sensor Network (WSN) technology plays a critical role for the construction of this paradigm. Hence, WSN technology should be adapted to support interoperability with the commodity internet entities. Since technological background of WSN and IP networks do not fit each other, this effort is not a straightforward process. In this paper, we introduce WiSEGATE which addresses end-to-end reliable interconnection problem between multiple internet entities and sensor nodes. WiSEGATE is a prototype of a new web server which supports three tier service scheme with a data acquisition mechanism of WSN to access the physical data in particular locations in the real world. In WiSEGATE, an interconnection gateway handles operations required for the interoperability. Since this gateway maintains reliable TCP/IP connections of the interconnected entities, the resource constraint sensor nodes on WSN do not require a TCP/IP stack for handling end-to-end connections. A lightweight service layer is implemented on a sensor node for operations required by the interconnection. The strength and novelty of the model lies in the fact that this lightweight service layer relieves extra memory usage for end-to-end connection management. For determining limits of the proposed model, firstly, we examined the steps for request/response mechanism and modeled the gateway as a queueing system. By doing this, we derive a definition of the request traffic. For proof of concept, we performed comprehensive tests in simulation and real testbed environments for WLAN connection. WiSEGATE can achieve reasonable response times up to 80 simultaneous connections from remote entities to WSN when WLAN PER is less than 0.2.