Preparation of poly(methyl methacrylate-co-ethylene glycol dimethacrylate-co-glycidyl methacrylate) walled thermochromic microcapsules and their application to cotton fabrics

This study focused on fabrication of the thermochromic microcapsules and their application to the cotton fabric. In this study, thermochromic systems composed of crystal violet lactone, bisphenol A, and 1-tetradecanol were prepared and microencapsulated by emulsion polymerization method in poly(methyl methacrylate-co-ethylene glycol dimethacrylate-co-glycidyl methacrylate) wall. The microcapsules were analyzed by Fourier transform infrared spectroscopy, scanning electron microscope, transmission electron microscope, differential scanning calorimetry, and thermogravimetric analysis. Their thermoregulating property was tested by T-history test. The results revealed that microcapsules with smooth surfaces, core–shell structured, and spherical shape were successfully produced. The latent heat storage capacity of the microcapsules decreased from 202 J g⁻¹ to 167 J g⁻¹ when their shell/core ratio changed from 0.5/1 to 2/1. Microcapsules were adequately had sufficient thermal resistance to the temperatures they will encounter during their application to textile products and their usage. According to the UV–visible spectroscopy analysis and color measurements, the microcapsules exhibited reversible color change from blue to colorless and vice versa. Besides, the microcapsule impregnated fabric was able to absorb latent heat energy of 21.79 J g⁻¹ at around 35 °C and had cooling effect. According to the colorimetric parameters, the fabric was at blue color at room temperature and became colorless when heated to the temperature above the melting point of thermochromic system. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48815.     

Comparative study on corrosion behaviors of Mg-Al-Zn alloys

A comparative study on corrosion behaviors of various Mg-Al-Zn alloys (AZ21, AZ41, AZ61 and AZ91 series, cast under same cooling conditions and controlled alloying composition) was carried out. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used for microstructural examinations. The corrosion behaviors were evaluated by immersion tests and potentiodynamic polarization measurements in 3.5% NaCl solution. The results showed that the influence of Al addition on corrosion resistance was more pronounced up to 4% (i.e. AZ41) above which its influence was at less extent. The deterioration of the corrosion resistance of the alloys, at higher Al contents, was attributed to the amount and morphology of β-Mg₁₇Al₁₂ intermetallics and the interruption of continuity of the oxide film on the surface of the alloys owing to coarsened β intermetallics.     

Cytological image analysis with a genetic fuzzy finite state machine

The objective of this research is to design a pattern recognition system based on a Fuzzy Finite State Machine (FFSM). We try to find an optimal FFSM with Genetic Algorithms (GA). In order to validate this system, the classifier has been applied to a real problem: distinction between normal and abnormal cells in cytological breast fine needle aspirate images and cytological peritoneal fluid images. The characteristic used in the discrimination between normal and abnormal cells is a texture measurement of the chromatin distribution in cellular nuclei. Furthermore, the effectiveness of this method as a pattern classifier is compared with other existing supervised and unsupervised methods and evaluated with Receiver Operating Curves (ROC) methodology.     

Preparation and textile application of poly(methyl methacrylate-co-methacrylic acid)/n-octadecane and n-eicosane microcapsules

In this study, a series of microencapsulated phase change materials with poly(methyl methacrylate-co-methacrylic acid) P(MMA-co-MAA) shell and n-octadecane or n-eicosane core were synthesized by emulsion polymerization method. The aim was to produce microencapsulated n-alkanes having functional groups on their outer surface, so that functional groups would help increasing physical interactions between microcapsules and fiber surface. Therefore, methyl methacrylate (MMA), ethylene glycoldimethacrylate (EGDM), and methacrylic acid (MAA) were copolymerized in oil phase of n-alkane. FT-IR results proved the successful synthesis of P(MMA-co-MAA) shell of microencapsulated n-alkanes. The DSC results indicated that the microencapsulated n-alkanes have considerable latent heat storage capacity in a range of 58–145 J/g. The average melting and freezing temperatures of the microencapsulated n-alkanes were measured as 27 and 26 °C for n-octadecane and 36 and 35 °C for n-eicosane, respectively. The microcapsules were of spherical and compact shape with particle sizes between 15 and 32 μm. The microcapsules on the cotton fabric applied by pad-dry-cure method were found highly durable and they showed sufficient stability upon several washings and rub fastness. Thermo-regulating properties of the fabrics were declared as a result of thermal history measurements.     

Synthesis and thermal properties of poly(n‐butyl acrylate)/n‐hexadecane microcapsules using different cross‐linkers and their application to textile fabrics

This study focused on the preparation, characterization, and determination of thermal properties of microencapsulated n‐hexadecane with poly(butyl acrylate) (PBA) to be used in textiles with heat storage property. Microcapsules were synthesized by emulsion polymerization method, and the particle size, particle size distribution, shape, and thermal storage/release properties of the synthesized microcapsules were analyzed using Fourier‐transform infrared spectroscopy, scanning electron microscopy, and differential scanning calorimetry techniques. Allyl methacrylate, ethylene glycol dimethacrylate, and glycidyl methacrylate were used as cross‐linkers to produce unimodal particle size distribution. MicroPBA microcapsules produced using allyl methacrylate cross‐linker were applied to 100% cotton and 50/50% cotton/polyester blend fabrics by pad‐cure method. The mean particle size of microcapsules ranges from 0.47 to 4.25 μm. Differential scanning calorimetry analysis indicated that hexadecane in the microcapsules melts at nearly 17°C and crystallizes at around 15°C. The contents of n‐hexadecane of different PBA microcapsules were in the range of 27.7–50.7%, and the melting enthalpies for these ratios were between 65.67 and 120.16 J/g, respectively. The particle size and thermal properties of microcapsules changed depending on the cross‐linker type. The cotton and 50/50% cotton/polyester blend fabrics stored 6.56 and 28.59 J/g thermal energy, respectively. The results indicated that PBA microcapsules have the potential to be used as a solid‐state thermal energy storage material in fabrics. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Dynamic Rate and FEC Adaptation for Video Multicast in Multi-rate Wireless Networks

Video multicast over Wireless Local Area Networks (WLANs) faces many challenges due to varying channel conditions and limited bandwidth. A promising solution to this problem is the use of packet level Forward Error Correction (FEC) mechanisms. However, the adjustment of the FEC rate is not a trivial issue due to the dynamic wireless environment. This decision becomes more complicated if we consider the multi-rate capability of the existing wireless LAN technology. In this paper, we propose a novel method which dynamically adapts the transmission rate and FEC for video multicast over multi-rate wireless networks. In order to evaluate the system experimentally, we implemented a prototype using open source drivers and socket programming. Our experimental results show that the proposed system significantly improves the multicast system performance.     

A comparative study on corrosion of Mg–Al–Si alloys

Corrosion behavior of various Mg–Al–Si alloys (AS11, AS21, AS41, AS61 and AS91 series), cast under the same cooling conditions and controlled alloying composition, was investigated systematically. Optical microscopy and scanning electron microscopy were used for microstructural examinations. The corrosion behavior was evaluated by immersion tests and potentiodynamic polarization measurements in 3.5% NaCl solution. The results from both immersion tests and the potentiodynamic polarization measurements showed that marginal improvement in corrosion resistance was observed with 2.0% Al (mass fraction) containing alloy (AS21) whereas Al addition above 2.0% (AS41, AS61 and AS91) deteriorated the corrosion resistance which was attributed to β phase, acting as cathode, and the interruption of continuity of the oxide film on the surface of the alloys owing to coarsened β and Mg₂Si phases.     

Dispersion polymerization of methyl methacrylate in supercritical carbon dioxide using a silicone‐containing fluoroacrylate stabilizer

Free radical dispersion polymerization of methyl methacrylate (MMA) was carried out in supercritical carbon dioxide (scCO₂) using poly{(heptadecafluorodecyl acrylate)‐co‐3‐[tris(trimethylsilyloxy)silyl]propyl methacrylate} (p(HDFDA‐co‐SiMA)) as stabilizer. Dry, fine powdered spherical poly(methyl methacrylate) (pMMA) particles with well‐defined sizes were produced. The resulting high yield of spherical and relatively uniform micron‐size pMMA particles was formed utilizing various amounts of p(HDFDA‐co‐SiMA) random copolymer. The particle diameter was shown to be dependent on the weight percent of the stabilizer added to the system. The effects of varying the concentration of stabilizer (1–7 wt%), reaction time (4–12 h) and pressure (15–35 MPa) upon the polymerization yield, molar mass and morphology of pMMA were investigated. Copyright © 2005 Society of Chemical Industry