Wave dynamics on a thin-liquid film falling down a heated wall

The dynamics of a thin liquid film falling down a uniformly heated wall is studied. The model introduced by Kalliadasis et al. [J. Fluid Mech. 475 (2003) 377] for the same problem is revisited and its deficiencies, namely the prediction of a critical Reynolds number with 20% error, cured. For the energy equation a high-order Galerkin projection in terms of polynomial test functions is developed. It is shown that not only does this more refined formulation correct the critical Reynolds number, but it also gives, with an appropriate expansion close to criticality, the long-wave theory. Bifurcation diagrams for permanent solitary waves are constructed and compared with the solution branches obtained from different models. It is shown that, in all cases, the long-wave theory exhibits limit points and branch multiplicity, while the other models predict the continuing existence of solitary waves. Time-dependent computations show that the free surface and interfacial temperature approach a train of coherent structures that resemble the infinite-domain stationary solitary pulses.     

A computational model for RNA multiple structural alignment

This paper addresses the problem of aligning multiple sequences of noncoding RNA (ncRNA) genes. We approach this problem with the biologically motivated paradigm that scoring of ncRNA alignments should be based primarily on secondary structure rather than nucleotide conservation. We introduce a novel graph theoretic model (NLG) for analyzing algorithms based on this approach, prove that the RNA multiple alignment problem is NP-Complete in this model, and present a polynomial time algorithm that approximates the optimal structure of size S   within a factor of O(log²S)$\mathrm{O}({\log }^{2}S)$.     

Velocity field in a twin-screw extruder

Velocity measurements inside the screw channels of a co-rotating, self-wiping, twin-screw extruder were carried out. A laser Doppler anemometer (LDA) system was used to measure tangential and axial velocity components in the translational region of one of the screws of a twin-screw extruder. The velocity measurements were carried out using heavy corn syrup at different screw speeds and for two forwards conveying elements differing in their pitch. It was found that velocity profiles in the translational region were substantially affected by the pitch of the screw element, however, screw speed (30–90 r.p.m.) did not have a significant effect on the shape of the velocity profiles. The range of velocity values in a 14 mm pitch screw element was wider than that in a 28 mm pitch screw element. Experimentally measured velocity profiles were compared with predictions of a one-dimensional model, which showed that the model underpredicted the velocity values, for the 14 mm pitch element.     

Mass-transport enhancement in regions bounded by rigid walls

The mass transport into a fluid bounded by stationary rigid walls in the limit of large Péclet number, Pe, is examined analytically. Two model systems are considered in detail: a stationary cavity and a model involving two concentric rotating cylinders. A macroscopic gradient is imposed between the top and bottom surfaces. It is demonstrated that mass transport into the fluid is enhanced owing to a recirculation zone which is connected to the solid boundary through a boundary layer of thickness O(Pe ^–1/3) in which cross-stream molecular diffusion is balanced by convection. The associated enhancement is large and scales as Pe ^1/3. Our asymptotic analysis is found to be in good agreement with numerical solutions of the full transport equation.     

On-the-Fly Reseeding: A New Reseeding Technique for Test-Per-Clock BIST

In this paper we present a new reseeding technique for test-per-clock test pattern generation suitable for at-speed testing of circuits with random-pattern resistant faults. Our technique eliminates the need of a ROM for storing the seeds since the reseeding is performed on-the-fly by inverting the logic value of some of the bits of the next state of the Test Pattern Generator (TPG). The proposed reseeding technique is generic and can be applied to TPGs based on both Linear Feedback Shift Registers (LFSRs) and accumulators. An efficient algorithm for selecting reseeding points is also presented, which targets complete fault coverage and allows to well exploiting the trade-off between hardware overhead and test length. Using experimental results we show that the proposed method compares favorably to the other already known techniques with respect to test length and the hardware implementation cost.     

Intermolecular interaction of thermoresponsive poly-2-isopropyl-2-oxazoline in solutions and interpolymer complex with fiber-forming polyethylene oxide

The cross-linked poly-2-isopropyl-2-oxazolines (PiPrOx) differing in cross-linker content have been synthesized and characterized by light scattering, chromatography, and rheometry. The dramatic influence of the cross-linker content on solubility and uni- or bimodality was observed. For the first time, the interpolymer complex of cross-linked PiPrOx with polyethylene oxide is manufactured in fibrous form by the electrospinning method. The role of intermolecular hydrogen bonds in the structure and properties of electrospun fibers (EF) was studied by infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. It was established that these interactions allow to obtain a uniform fibrous membrane. At the same time, hydrogen bonding is responsible for the self-organization of PiPrOx in water.     

The effect of electrical processing on mass transfer in beetroot and model gels

The diffusion between solids and surrounding liquids has been studied under the influence of different electric field strengths varying between 0–1000 V m⁻¹, characteristic both of ohmic heating and Moderate Electric Field (MEF) processing. The rate of enhancement of mass transfer between slabs of beetroot and surrounding fluid has been studied at up to 60 °C, as a function of electric field strength and the orientation of the slab to the field. Enhancements in diffusion coefficient of up to a factor of 2 are seen, with decreased enhancement at higher temperature and when the electric field does not pass through the particle. Diffusion into gels has been studied and enhancement found only for alginate (an ionically set gel) and not for gelatin and egg albumin, that are thermally set gels.     

Study on solids translational and rotational motions in rotating cans

Study on translational and rotational motion of solids is important in a wide range of engineering processes. However, rotational motion of solid particles in an opaque system has not been given much attention due to the lack of appropriate measurement methods. This paper presents a new technique, Multiple-Positron Emission Particle Tracking (Multiple-PEPT), to track both rotational and translational motions of a solid simultaneously. The sample study presented here is to track the rotation and translation of a cubed potato in a food can for optimising the canned food process. The results have demonstrated that the rotational and transitional motion of the cubed potato can be simultaneously tracked through mounting three small (200 microns) radioactive tracers on the cube corners. The rotation and translation of the cube can be reconstructed based on the trajectories of the three tracers. The translational and rotational motions of the potato particle are related to each other, and both the motions are greatly dependent on the solids fraction, the liquid viscosity and the density difference between the solid and liquid; but follow specific patterns.