An iterative approach for the evaluation of delamination stresses in laminated composites

A computational strategy for the evaluation of delamination stresses in multilayered fibre-reinforced composites is presented. The approach uses special inter-laminar shear elements and an iterative procedure in the calculation of out-of-plane stresses. Both regular and singular elements for the free edge are presented. The solutions are carried on by switching between direct matrix solution methods of small systems of equations and an iterative conjugate gradient method. The proposed discretization avoids ill-conditioning problems, modelling difficulties and large computational cost associated with three-dimensional analysis of delamination of holes, cut-outs, joints and areas of complex stress states.     

Triangular quarter-point elements as elastic and perfectly-plastic crack tip elements

Triangular and prismatic quadratic isoparametric elements, formed by collapsing one side and placing the mid-side node near the crack tip at the quarter point, are shown to embody the (1/√r) singularity of elastic fracture mechanics and the (1/r) singularity of perfect plasticity. The procedure of performing the fracture analysis for the case of small scale yielding is discussed, and the finite element results are compared with theoretical results. The proposed elements have wide application in the fracture analysis of structures where ductile fracture is investigated. They permit a determination of the relationship between crack tip field parameters, loading, and geometry. And for a given fracture criterion can be applied to the prediction of fracture in structures such as pressure vessels under in service conditions.     

Potential for economic solar desalination in the Middle East

Fresh water forms only about 1% of the total water available on earth. Technologies for the desalination of seawater have considerably matured in the last decade. However, the energy required for the desalination is usually expensive in arid areas where fresh water is required. Renewable energy provides a clean, free, and low-maintenance source of energy for desalination, limited only by their initial cost, and the variability of the available energy. In this paper the potential use of solar energy for the desalination of seawater in the Middle East is evaluated. Multi-Stage Flash (MSF) desalination requires large amounts of energy, while Reverse Osmosis (RO) desalination is more energy efficient. Solar distillation is a very simple and direct method that may be used, requiring only large flat areas of land, having no running energy costs and being very suitable for remote areas. Photovoltaics is another promising renewable energy source for seawater desalination in the Middle East. It is best suited for the RO and Electrodialysis (ED) methods. The desalination plant doesn't need to run continuously, and therefore no storage batteries are required. Diesel and / or natural gas may be used as a backup energy.     

Author index,vol. 50 (1991)

Author index, vol. 50 (1991)     

A convergent method for cyclic plasticity analysis with application to nuclear components

A new method for elastic-plastic analysis of pressure vessels subject to cyclic mechanical and thermal loading is proposed. The method is shown to lead to a highly convergent solution when applied in conjunction with Prager's complete kinematic hardening rule. The plastic strain increments are written in terms of the total strains, thus leading to a consistent formulation when the analysis is done by an incremental iterative process. The proposed method is applied to the analysis of a long cylinder in the state of generalized plane strain and subject to cyclic loading. Cyclic plasticity and creep are considered in one of the problems analysed. The finite difference method is used in the solution of the compatibility and equilibrium equations. It is shown that the computation time using the proposed method is very small compared to other techniques.     

Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source

The ability of Clostridium butyricum RAK25832 to use casamino acids as a nitrogen source was investigated. Strain RAK25832 showed the capacity to utilize different types of carbon sources. With glucose as a carbon source (10 g/L), the preferred final concentration of casamino acids was 26.67 g/L, with a cumulative hydrogen production, production rate, and yield of 2505 mL H₂/L, 160 mL/h, and 1.81 mol H₂/mol glucose, respectively. Eighteen metal elements were screened to identify the most important metals for biohydrogen production, and four elements were optimized. The optimal medium composition was MgCl₂·6H₂O (0.1 g/L), K₂HPO₄·3H₂O (6.67 g/L), NaHCO₃ (2.6 g/L), and FeCl₂·4H₂O (0.002 g/L). Vitamin supplementation of the medium showed no significant effect on hydrogen production. Under the optimized conditions, cumulative hydrogen production reached 3074 mL H₂/L. This is the first study to demonstrate the use of casamino acids as a nitrogen source by C. butyricum.     

Nutritional Sources and Anticancer Potential of Phenethyl Isothiocyanate: Molecular Mechanisms and Therapeutic Insights

Phenethyl isothiocyanate (PEITC), a compound derived from cruciferous vegetables, has garnered attention for its anticancer properties. This review synthesizes existing research on PEITC, focusing on its mechanisms of action in combatting cancer. PEITC has been found to be effective against various cancer types, such as breast, prostate, lung, colon, and pancreatic cancers. Its anticancer activities are mediated through several mechanisms, including the induction of apoptosis (programmed cell death), inhibition of cell proliferation, suppression of angiogenesis (formation of new blood vessels that feed tumors), and reduction of metastasis (spread of cancer cells to new areas). PEITC targets crucial cellular signaling pathways involved in cancer progression, notably the Nuclear Factor kappa-light-chain-enhancer of activated B cells (NF-κB), Protein Kinase B (Akt), and Mitogen-Activated Protein Kinase (MAPK) pathways. These findings suggest PEITC's potential as a therapeutic agent against cancer. However, further research is necessary to determine the optimal dosage, understand its bioavailability, and assess potential side effects. This will be crucial for developing PEITC-based treatments that are both effective and safe for clinical use in cancer therapy.     

Deposition of boron doped DLC films on TiNb and characterization of their mechanical properties and blood compatibility

Abstract

Diamond-like carbon (DLC) material is used in blood contacting devices as the surface coating material because of the antithrombogenicity behavior which helps to inhibit platelet adhesion and activation. In this study, DLC films were doped with boron during pulsed plasma chemical vapor deposition (CVD) to improve the blood compatibility. The ratio of boron to carbon (B/C) was varied from 0 to 0.4 in the film by adjusting the flow rate of trimethylboron and acetylene. Tribological tests indicated that boron doping with a low B/C ratio of 0.03 is beneficial for reducing friction (μ = 0.1), lowering hardness and slightly increasing wear rate compared to undoped DLC films. The B/C ratio in the film of 0.03 and 0.4 exhibited highly hydrophilic surface owing to their high wettability and high surface energy. An in vitro platelet adhesion experiment was conducted to compare the blood compatibility of TiNb substrates before and after coating with undoped and boron doped DLC. Films with highly hydrophilic surface enhanced the blood compatibility of TiNb, and the best results were obtained for DLC with the B/C ratio of 0.03. Boron doped DLC films are promising surface coatings for blood contacting devices.     

Effect of γ‐irradiation on the biophysical and morphological properties of corn

The effects of γ‐irradiation on the biophysical and morphological properties of corn plants were investigated. The irradiation doses were 0, 1, 1.5, 2.5, 5, and 10 krad. Corn grains exposed to 1.5 and 2.5 krad showed highly significant changes in all growth parameters. Fluorescence and light absorption spectra of chlorophyll attributed to different doses treatments of corn grains clearly confirmed the superiority of 1.5 krad irradiation dose in stimulating corn plants. Furthermore, the frequency dependence of the relative permittivity and the electric conductivity of the treated samples have been performed and discussed. The obtained results give another support via the biophysical properties for the 1.5 krad irradiation dose to be the most favorable one to improve the plant growth characteristics.