A metaheuristic analysis of heat transfer rates through porous fins of tapered and step profiles: a comparative study

Neural Computing and Applications - The advanced high-end gadgets and sophisticated machines require effective mechanism of transferring heat away from the sources. In a large number of...     

Nonlinear static and dynamic analysis of circular plates and shallow spherical shells using the collocation method

The present work investigates the efficacy and applicability of interior global orthogonal point collocation method to the axisymmetric nonlinear analysis of elastic circular plates and shallow spherical shells subjected to uniformly distributed transverse load. Spacewise discretisation has been carried out using a polynomial expansion with the zeros of a Chebyshev polynomial as collocation points. Timewise integration has been carried out with Newmark k-β scheme corresponding to average acceleration method. The static response and snap-through buckling results, as well as, the dynamic response and dynamic buckling results under a uniformly distributed step load have been obtained and found to agree closely with the available results.     

An efficient clustering scheme using support vector methods

Support vector clustering involves three steps—solving an optimization problem, identification of clusters and tuning of hyper-parameters. In this paper, we introduce a pre-processing step that eliminates data points from the training data that are not crucial for clustering. Pre-processing is efficiently implemented using the R*-tree data structure. Experiments on real-world and synthetic datasets show that pre-processing drastically decreases the run-time of the clustering algorithm. Also, in many cases reduction in the number of support vectors is achieved. Further, we suggest an improvement for the step of identification of clusters.     

Non-darcy natural convection from a heated vertical plate in saturated porous media with mass transfer

The nonsimilar and self-similar flows for the steady natural convection over a vertical heated surface in a saturated porous medium with mass transfer using non-Darcy model have been studied under boundary layer approximations. The differential equations governing both the nonsimilar and self-similar flows have been solved numerically using an implicit finite-difference scheme developed by Keller. The results indicate that both heat transfer and velocity field are appreciably affected by the modified Grashof number and mass transfer except that the effect of the modified Grashof number on the heat transfer for large suction is very small. It is found that the maximum velocity occurs at the wall and it increases as the modified Grashof number or injection increases.     

Exact solutions for characterization of electro-elastically graded materials

The present paper deals with a class of functionally graded materials (FGM), called active FGM that has electro-elastically graded material phases. An active FGM system leads to minimization of stress concentration that arises due to mismatch in the electrical and elastic properties of the constituent phases. This work focuses on the characterization of the through thickness stresses of an active FGM subjected to electrical excitation. The structure is comprised of a substrate, an electro-elastically graded layer and an active layer. A formulation for exact solutions of the system based on Euler–Bernoulli theory is presented. Power-law variation of the composition of the two phases in the graded layer is considered. Performance of linearly gradient FGM for a range of stiffness and electrical property ratios of the active and substrate materials have been studied. It is observed that the electrical strain component and the compositional gradation significantly influence the stress characteristics of the active FGM.     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

Effect of Calcium Lactate, 4-Hexyl Resorcinol and Vacuum Packing on Physico-chemical, Sensory and Microbiological Qualities of Minimally Processed Litchi (Litchi chinensis Sonn.)

Litchi (Litchi chinensis Sonn.) fruits are very susceptible to pericarp browning which adversely affects consumer acceptability even though the aril portion remains in excellent condition. Litchi arils (litchis) were treated with a solution containing 0–2% (w/v) calcium lactate (CL), 0–0.02% (w/v) 4‐hexyl resorcinol (4‐HR) and 1% potassium sorbate. The pH of solution was adjusted to 4.0 with citric acid. Treated litchis were packed in polystyrene trays, over‐wrapped with polypropylene film, vacuum‐packed (0, 47409.3, 94831.9 Pa) and stored at 4 ± 2 °C. Drip losses, pH, total soluble solids (TSS), sensory attributes and microbiological quality of stored samples were estimated. A four‐factor, three‐level experimental design (D₆ Hokes design) with 19 experiments was chosen. Mathematical models were developed to analyse and predict the effect of CL, 4‐HR, in‐package vacuum and storage time on the responses. TSS, pH and sensory scores decreased significantly (P 0.01), whereas drip losses and microbial count increased significantly (P 0.01) with time. Drip loss was significantly (P 0.1) reduced by addition of CL. 4‐HR prevented browning and changes in colour score during storage were significantly less. Vacuum in packages exerted significant (P 0.01) effect over pH, TSS, sensory and microbiological qualities of minimally processed litchis.