Introducing realistic tire–pavement contact stresses into Pavement Analysis using Nonlinear Damage Approach (PANDA)

Realistic tire–pavement interface contact areas and stresses were incorporated into the Pavement Analysis using Nonlinear Damage Approach (PANDA) user interface (PUI). PANDA is a software library developed to simulate the complex thermo-viscoelastic–viscoplastic–viscodamage responses of the pavement to mechanical and environmental loads. The PUI is an interface generating a finite element representation of the pavement within PANDA. The application of realistic tire loading is necessary to calculate accurate pavement responses. The PUI incorporates a database of tire contact areas and stresses obtained from tire finite element simulations. The database includes tire interface characteristics with pavements for various applied loads, tire inflation pressures, vehicle speeds and scenarios of different rolling simulations. A parametric study was conducted to investigate the effect of simulations of tire contact stresses that match field measurements on viscoelastic and viscoplastic pavement responses. Pavement responses are greatly affected using realistic tire loading contact stresses and contact geometry as compared to simplified contact models. The impact on rutting and damage predictions cannot be ignored if reliable projections of pavement performance are to be made. This study confirms the importance of considering realistic three-dimensional contact stresses to design and analyse pavements.     

Reducing CO2 emission from exhaust gases using molten carbonate fuel cells: a new approach

The aim of this study is to couple molten carbonate fuel cell (MCFC) stack with integrated gasification combined cycle fed by refinery residues, to remove CO₂ from gas turbine exhaust gases that have CO₂ emission rate of 14,200 ton/year. By applying multi-objective optimisation (MOO) using genetic algorithm, the optimal values of operating load and the corresponding values of objective functions are obtained. The MOO of the MCFC system regarding two scenarios is performed. The first scenario is minimisation of cost of electricity (COE) and CO₂ emission rate. Objective functions of the second scenario are the same as in the first scenario while CO₂ tax is taken into account. Results show that the second scenario has 29.5% lower average optimal COE and 2.5% lower average emission rate in comparison with the first scenario. A sensitivity analysis is also performed to study the effect of fuel price and CO₂ tax variations on optimal solutions.     

Synthesis,Characterization, and Investigation of Inhibitor Release of the Anticorrosion Sol–Gel Hybrid Nanocomposite Coatings

Protection of Metals and Physical Chemistry of Surfaces - Corrosion protective coatings were developed on 1050 aluminum alloy through the sol–gel process using...     

Antimicrobial Property,Antioxidant Capacity,and Cytotoxicity of Essential Oil from Cumin Produced in Iran

ABSTRACT: Cumin (Cuminum cyminum) is one of the commonly used spices in food preparations. It is also used in traditional medicine as a stimulant, a carminative, and an astringent. In this study, we characterized the antimicrobial, antioxidant, and cytotoxic activities of cumin. E. coli, S. aureus, and S. faecalis were sensitive to various oil dilutions. The total phenol content of the essential oil was estimated to be 33.43 μg GAE/mg of the oil. The oil showed higher antioxidant activity compared with that of BHT and BHA. The cumin essential oil exhibited a dose-dependent scavenging of DPPH radicals and 5.4 μg of the oil was sufficient to scavenge 50% of DPPH radicals/mL. At a concentration of 0.1 μL/mL, oil destructed Hela cells by 79%. The antioxidant activity of cumin essential oil might contribute to its cytotoxic activity. Acute and subchronic toxicity was studied in a 30-d oral toxicity study by administration to Wistar rats of the essential oil. A 17.38% decrease in WBCs count, and 25.77%, 14.24%, and 108.81% increase in hemoglobin concentration, hematocrit, and platelet count, respectively, were noted. LDL/HDL ratio was reduced to half, which adds to the nutritional effects of cumin. Thus, cumin with a high phenolic content and good antioxidant activity can be supplemented for both nutritional purposes and preservation of foods.     

Identification of the Critical Characteristics of Different Types of Voltage Sags for Synchronous Machine Torque Oscillations

Abstract—This article investigates the effects of symmetrical and unsymmetrical voltage sags on an important characteristic of torque pulsation of synchronous machines. Voltage sags may cause high torque pulsations, which can damage the shaft or equipment connected to it. Duration, magnitude,and initial point-on-wave of the voltage sag are the major characteristics that can influence the synchronous motors torque transients. The effect of the characteristics on the severity of the transient torque is clarified parametrically, and the critical characteristics of each type of voltage sag are extracted. A theoretical analysis is first presented to determine the severest conditions. In this analysis, for each type of voltage sag, the stator flux trajectory in complex coordination is traced to monitor its variation during and after sag. By this method, the effects of different sag types can easily be compared during the sag and at the sag ending instant. To justify the theoretical analysis, simulations of a typical synchronous motor are carried out that confirm the theoretical analysis.     

Change in optic disk topography after trabeculectomy

PURPOSE: To investigate the relationship between optic disk topography and intraocular pressure before and after trabeculectomy with confocal scanning laser ophthalmoscopy. METHODS: The eyes of 49 consecutive patients undergoing trabeculectomy at a university-based glaucoma practice underwent preoperative and postoperative imaging using a confocal scanning laser ophthalmoscope (Heidelberg Retina Tomograph). Three images of one eye of each patient were obtained with a 15-degree field of view. Preoperative images were obtained approximately 2 months before surgery (mean +/- SD, 2.4 +/- 1.6 months). Postoperative images were obtained at least 3 months after surgery (mean, 4.5 +/- 2.6 months). RESULTS: Mean preoperative intraocular pressure, postoperative intraocular pressure, and percent change in intraocular pressure respectively were 23.1 +/- 6.8 mm Hg, 12.7 +/- 7.1 mm Hg, and 43.8% +/- 29.9%. A significant association (P < .01) was found between percent decrease in intraocular pressure and decreases in cup area, cup volume, and cup/disk area ratio as well as between percent decrease in intraocular pressure and increases in rim area, rim volume, mean height contour, retinal cross-section area, and height in contour. Between 11.7% and 31.2% of the variability (R2) in these parameters was explained by the percent change in intraocular pressure. Topography changes were more strongly associated with percent change than with mean change in intraocular pressure. We found no association between percent decrease in intraocular pressure and reference plane height or maximum cup depth. CONCLUSIONS: Changes in optic nerve topography were associated with reduction in intraocular pressure after trabeculectomy.     

Selective hydrogenation of benzalacetone

Benzalacetone was hydrogenated using a Raney nickel catalyst, and various amounts of HCl, NaCl and H₃PO₄ in ethyl alcohol were added to test their inhibiting effect on catalytic activity. In the presence of HCl and H₃PO₄, Raney nickel lost its catalytic activity, and the rate of hydrogenation was decreased, but NaCl had no effect. While the hydrogenation of the ethylenic bond of benzalacetone was retarded, the decrease in hydrogen uptake by the carbonyl group was affected much more, and the amount of alcohol produced was markedly reduced.