Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Thermal stability in bulk ultrafine-grained (UFG) 5083 Al that was processed by gas atomization followed by cryomilling, consolidation, and extrusion, and that exhibited an average grain size of 305 nm, was investigated in the temperature range of 473 to 673 K (0.55 to 0.79 T _m , where T _m is the melting temperature of the material) for different annealing times. Appreciable grain growth was observed at temperatures > 573 K, whereas there was limited grain growth at temperatures < 573 K even after long annealing times. The values of the grain growth exponent, n, deduced from the grain growth data were higher than the value of 2 predicted from elementary grain growth theories. The discrepancy was attributed to the operation of strong pinning forces on boundaries during the annealing treatment. An examination of the microstructure of the alloy suggests that the origin of the pinning forces is most likely related to the presence of dispersion particles, which are mostly introduced during cryomilling. Two-grain growth regimes were identified: the low-temperature region (<573 K) and the high-temperature region (>573 K). For temperatures lower than 573 K, the activation energy of 25 ± 5 kJ/mol was determined. It is suggested that this low activation energy represents the energy for the reordering of grain boundaries in the UFG material. For temperatures higher than 573 K, an activation energy of 124 ± 5 kJ/mol was measured. This value of activation energy, 124 ± 5 kJ/mol, lies between that for grain boundary diffusion and lattice diffusion in analogous aluminum polycrystalline systems. The results show that the strength and ductility of bulk UFG 5083 Al, as obtained from tensile tests, correlate well with substructural changes introduced in the alloy by the annealing treatment.     

PSoC-based embedded design and quartz tuning fork for low-temperature measurement system design

This article describes a commercial quartz tuning fork (QTF), 8 mm in height by 3 mm in diameter, holding a two-terminal electronic component with a nominal frequency of 32.768 kHz and 12.5 pF typical load capacitance packed in a vacuum-sealed metal container, which has been used as a sensor for low-temperature measurement with good sensitivity, repeatability, and reliability. An embedded readout design with the support of a programmable system on-chip (PSoC) and virtual instrument control program, which uses a personal computer as an input/output device, provides online data acquisition of the QTF frequency data, which will in turn provide the measurement of the low-temperature bath in which the QTF is immersed. The embedded PSoC readout captures the varying frequency signals from the QTF as a response to the measurement temperature, processes it, and sends the frequency value to a personal computer, where LabVIEW, a graphical language ("G" language), displays the data in a graphical format. The QTFs for low temperature (300 K to 77 K) are well studied, whereas a sensor using a PSoC embedded design as a readout is a novel design implementation.     

Determining trust in media-rich websites using semantic similarity

Significant growth of multimedia content on the World Wide Web (or simply ??Web??) has made it an essential part of peoples lives. The web provides enormous amount of information, however, it is very important for the users to be able to gauge the trustworthiness of web information. Users normally access content from the first few links provided to them by search engines such as Google or Yahoo!. This is assuming that these search engines provide factual information, which may be popular due to criteria such as page rank but may not always be trustworthy from the factual aspects. This paper presents a mechanism to determine trust of websites based on the semantic similarity of their multimedia content with already established and trusted websites. The proposed method allows for dynamic computation of the trust level of websites of different domains and hence overcomes the dependency on traditional user feedback methods for determining trust. In fact, our method attempts to emulate the evolving process of trust that takes place in a user??s mind. The experimental results have been provided to demonstrate the utility and practicality of the proposed method.     

Molar volume and ultrasonic studies of europium soaps in mixed organic solvents

The ultrasonic velocity and density measurements of europium soaps in a mixture of benzene and methanol (3:2, vol/vol) were used to evaluate various acoustic parameters and molar volume and to determine the critical micelle concentration. The results showed that the ultrasonic velocity, specific acoustic impedance, molar sound velocity, and molar compressibility increase, and intermolecular free length, adiabatic Compressibility, and relative association decrease with increasing concentration and chainlength of the soap. The results were interpreted in terms of soap-solvent interaction.     

Water quality prediction capabilities of WASP model for a tropical lake system

Water quality modelling facilitates our better understanding of the processes taking place in a lake system, and conservation plans to address them. The water quality analysis simulation programme (WASP) was used in this study to predict daily variations in water quality parameters, namely dissolved oxygen, nitrate, phosphate and chlorophyll‐a and biochemical oxygen demand concentrations in a tropical lake system. The lake was divided into eight segments with the respective morphological, environmental and flow details being model inputs. The monthly concentration of each water quality parameter also comprised model input. The model output was daily spatiotemporal variation in these parameters over a period of 476 days. This study also indicated that the occurrence of precipitation plays a major role in defining the water quality of a tropical lake. The heavy precipitation after a long gap, especially during the summer season, results in a large quantity of organic matter entering the lake through drains, thereby increasing the organic matter and phosphate in the water body, and subsequently resulting in high chlorophyll‐a concentrations in the lake. A reduced chlorophyll‐a concentration was observed during the heavy rains. The water quality fluctuations are more pronounced with precipitation, especially where polluted drains enter the lake. An improved water quality can be observed downstream, including increased dissolved oxygen and nitrate concentrations. Improved water quality was observed during the postmonsoon period, with increased salinity and dissolved oxygen concentrations, a finding that confirms generalized and specific conclusions can be achieved with the use of the WASP model.     

Assisting comprehension of animation programs through interactive code visualization

Visual languages have been widely used to help people create animation programs. However, current programming environments lack features supporting efficient code exploration and program comprehension, particularly for understanding relationships among parts of animation programs. In this paper, we present novel interactive visualizations aimed at helping people to understand animation programs. We conducted an empirical study to evaluate the impact of these visualizations on programmer comprehension of the code, showing that our approach enabled programmers to comprehend more information with less effort and in less time. This result is potentially significant because it demonstrates an approach for helping users to explore and understand animation code. We anticipate that this approach could be applied in a wide variety of animation programming tools, which could ease common animation programming tasks that require understanding code.     

A Deep Learning Approach to Detection and Mitigation of Distributed Denial of Service Attacks in High Availability Intelligent Transport Systems

Mobile Networks and Applications - In the era of Internet of Things (IoT) powered by 5G technologies, Automobile Industry is headed towards a revolution. In Intelligent Transport Systems (ITS),...     

Circular Fractal Antenna Design with Inscribed Square for Ultra Wide Band Applications

Journal of Communications Technology and Electronics - In this article, an ultra-wide band circular fractal antenna inscribed with square is presented. The prototype of the antenna is fabricated on...     

Building a speech recognition system with privacy identification information based on Google Voice for social robots

The Journal of Supercomputing - Currently, many smart speakers, even social robots, appear on the market to help people's lives become more convenient. Usually, people use smart speakers to...