A high temperature apparatus for measurement of the Seebeck coefficient

A high temperature Seebeck coefficient measurement apparatus with various features to minimize typical sources of error is designed and built. Common sources of temperature and voltage measurement error are described and principles to overcome these are proposed. With these guiding principles, a high temperature Seebeck measurement apparatus with a uniaxial 4-point contact geometry is designed to operate from room temperature to over 1200 K. This instrument design is simple to operate, and suitable for bulk samples with a broad range of physical types and shapes.     

A pilot survey of 39 Victorian WWTP effluents using a high speed luminescent umu test in conjunction with a novel GC-MS-database technique for automatic identification of micropollutants

In 2007, samples of treated effluent were collected at point of discharge to the environment from 39 wastewater treatment plants (WWTPs) located across Victoria, Australia grouped by treatment type. Sample genotoxicity was assessed with a high-throughput luminescent umu test method using Salmonella typhimurium TL210 strain, with and without addition of a commercially available metabolic activation system. Samples were also screened using a gas chromatographic-mass spectrometric mass-structure database recognition method. A genotoxic response was observed in half of the samples tested without metabolic activation system (相似文献   

Determination of residual avoparcin in chicken muscle by HPLC with ultraviolet and amperometric detection

An analytical method was developed for determination of residual avoparcin in chicken muscle by measuring alpha- and beta-avoparcin, major components of the pharmaceutical preparation avoparcin, using HPLC with UV and amperometric detectors. The analytical HPLC was run on a Cosmosil 5C18-AR column (4.6 mm x 25 cm) with a gradient formed from A: 2.5% acetic acid, 0.01 mol/L sodium heptane sulfonic acid-acetonitrile (88.5:11.5) (pH 4.0) and B: 2.5% acetic acid-acetonitrile (10:90), using UV and amperometric detection (AMD) with glassy-carbon electrode (+900 mV). Avoparcin was extracted from chicken muscle by homogenization with methanol-0.2 mol/L sulfuric acid (6:4) followed by centrifugation after pH adjustment to 4 with 1 mol/L sodium hydroxide. The supernatant was evaporated to dryness, and the residue was dissolved in water. The aqueous layer was adjusted to pH 4 by adding 1 mol/L sodium hydroxide. Then it was purified on a Sep-Pak tC18 plus ENV cartridge. The cartridge was washed with water, and retained substances were eluted with 50% methanol. The eluate was evaporated to dryness under reduced pressure. The residue was dissolved in water and determined by HPLC. Recoveries of avoparcin spiked in chicken muscle were 73.1-88.1% at levels of 2-10 micrograms/g. The detection limits were 0.5 microgram/g (UV) and 0.2 microgram/g (AMD).     

Preparation and Intestinal Immunostimulating Activity of Low Molecular Weight Alginate from Saccharina (Laminaria) Species in Japan

We studied the structure of alginates extracted from five commercial Saccharina (Laminaria) species including three varieties (eight samples in all) harvested in Hokkaido, Japan. The algae used were Saccharina japonica, S. japonica var. diabolica, S. japonica var. ochotensis, S. japonica var. religiosa, S. longissima, S. coriacea, S. angustata, and S. sculpera (Kjellmaniella crassiforia). These alginates have molar fractions of mannuronic acid (F_M) ranging from 0.68 to 0.76 and weight average molecular weights (M_ws) ranging from 511,000 to 616,000. Alginate samples from both S. angustata (F_M = 0.76) and S. longissima (F_M = 0.68) showed intestinal immunological activity through Peyer’s patch cells of C3H/HeJ mice. Low molecular weight S. angustata alginate (F_M = 0.75, M_w = 70,000) degraded using a wet pulverizing system showed higher activity than the native one.     

Measurement of the flood discharge of a small-sized river using an existing digital video recording system

In this study, a closed-circuit television (CCTV) system, installed for surveillance purposes, is utilized to measure the flow rate during a flood. The procedure to determine both the angle and scale-factor of the camera is described. Then, image analysis techniques, namely the direct visual measurement method, Large-Scale PIV (LSPIV) and Space-Time Image Velocimetry (STIV), are applied to the video images recorded by the CCTV camera. The results of these methods and the conventional float measurement are compared. In addition, the accuracy of the respective methods is discussed. A set of low-quality video images of a flood during a thunderstorm that occurred under the dark ambient conditions (midnight) is analyzed using three image-based methods. The transition of the flow rate during the event is successfully estimated.     

Oxidative Stress and Its Significant Roles in Neurodegenerative Diseases and Cancer

Reactive oxygen and nitrogen species have been implicated in diverse pathophysiological conditions, including inflammation, neurodegenerative diseases and cancer. Accumulating evidence indicates that oxidative damage to biomolecules including lipids, proteins and DNA, contributes to these diseases. Previous studies suggest roles of lipid peroxidation and oxysterols in the development of neurodegenerative diseases and inflammation-related cancer. Our recent studies identifying and characterizing carbonylated proteins reveal oxidative damage to heat shock proteins in neurodegenerative disease models and inflammation-related cancer, suggesting dysfunction in their antioxidative properties. In neurodegenerative diseases, DNA damage may not only play a role in the induction of apoptosis, but also may inhibit cellular division via telomere shortening. Immunohistochemical analyses showed co-localization of oxidative/nitrative DNA lesions and stemness markers in the cells of inflammation-related cancers. Here, we review oxidative stress and its significant roles in neurodegenerative diseases and cancer.     

An Analog Front‐End Circuit for ISO/IEC 14443‐Compatible RFID Interrogators

An analog front‐end circuit for ISO/IEC 14443‐compatible radio frequency identification (RFID) interrogators was designed and fabricated by using a 0.25 µm double‐poly CMOS process. The fabricated chip was operated using a 3.3 Volt single‐voltage supply. The results of this work could be provided as reusable IPs in the form of hard or firm IPs for designing single‐chip ISO/IEC 14443‐compatible RFID interrogators.     

Stabilizing the optimal carrier concentration for high thermoelectric efficiency

The band structure of PbTe can be manipulated by alloying with MgTe to control the band degeneracy. This is used to stabilize the optimal carrier concentration, making it less temperature dependent, demonstrating a new strategy to improve overall thermoelectric efficiency over a broad temperature range.     

A Thermoelectric Generator Using Engine Coolant for Light-Duty Internal Combustion Engine-Powered Vehicles

We proposed and fabricated a thermoelectric generator (TEG) using the engine water coolant of passenger vehicles. The experimental results revealed that the maximum output power from the proposed thermoelectric generator was ~75 W, the calculated thermoelectric module efficiency of the TEG was ~2.1%, and the overall efficiency of electric power generation from the waste heat of the engine coolant was ~0.3% in the driving mode at 80 km/h. The conventional radiator can thus be replaced by the proposed TEG without additional devices or redesign of the engine water cooling system of the existing radiator.     

Higher order structures and toughening mechanisms for simultaneously polymerized polymethacrylate/polyurethane

Amorphous polymer/crystalline polymer blends can be prepared via the simultaneous polymerization of polymethacrylate/polyurethane combinations. The relationship between higher order structures and fracture mechanisms in these blends must be uncovered to elucidate the source of the increased fracture toughness of such materials. The present work involves the production of blended polymethacrylate/polyurethane and assess the internal structures of these specimens using optical and electron microscopy. These observations reveal the presence of both spherulites and elastomeric phases. The spherulites consisting of the polyurethane and are several micrometers in diameter whereas the phase-separated polyurethane elastomeric domains are approximately 100 nm in size. Multiple cracks, crack bridging and plastic deformation around the precrack tips of loaded specimens are evidently responsible for the increased toughness of these blends. The former two phenomena are attributed to the presence of spherulites while the plastic deformation of the methacrylate matrix is ascribed to cavitation of the polyurethane elastomeric phases in response to loading.