Ion‐exchange resins. II. Acrylamide crosslinked copolymers as precursors for some ion exchangers

Crosslinked copolymers of acrylamide (AA) and ethylacrylate and some ion exchangers derived from them containing either primary amine groups, obtained by the Hofmann degradation of the amide groups, or carboxylic groups, obtained by the alkaline hydrolysis of the ester groups, were studied. Divinylbenzene and N,N′‐methylenebisacrylamide were used as crosslinkers. The starting copolymers and the corresponding ion exchangers were characterized by IR spectroscopy, swelling behavior, and thermogravimetric analysis. The ion‐exchanger properties were correlated with the crosslinker nature and the chemical reactions performed on the AA copolymers. The average molecular weight between two crosslinks, determined from the swelling data in water, was compared with that calculated on the basis of the copolymerization stoichiometry only for the carboxylic cation exchangers. In this way, the preservation of the crosslink density after the hydrolysis was revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2701–2707, 2003     

Effect of supercritical CO2 extraction process parameters on oil yield and pigment content from by‐product hemp cake

This research gives an insight into the possibility of exploiting the one of the food industry's by‐products – pressed hemp cake. The complete recovery of oil from pressed hemp cake was achieved. Residual oil that remained in cake after pressing was extracted with supercritical CO₂ by applying different process parameters. Optimal extraction conditions were determined using response surface methodology. Total pigment contents of the oils obtained were determined. Extraction pressure had the most significant influence on yield and pigment content of extracted hemp cake oil. Depending on the pressure, the chlorophyll a content ranged from 101.11 to 378.28 mg kg^?1 and chlorophyll b from 65.14 to 189.78 mg kg^?1, while total carotene content was in the range from 33.58 to 132.67 mg kg^?1. The remaining oil in pressed hemp cake after supercritical CO₂ extraction was determined to be 0.56 ± 0.08% and the defatted cake was rich in proteins and fibre.     

Mathematical modelling of soybean oil solubility in supercritical carbon dioxide

The solubility of soybean oil in supercritical carbon dioxide has been determined in the pressure range of 100–300 bar and in the temperature range of 313–323 K. The obtained values (from 0.0005 to 0.02055 g L^?1) have been correlated using four different empirical equations proposed correspondingly by Chrastil, del Valle and Aquilera, Adachi and Lu and Sparks et al. Since the Sparks et al. equation provided the lowest average absolute relative deviation (AARD) (10.25%) than other models in the examined experimental range, a modified equation of Sparks et al. model was developed for predicting the solubility of soybean oil in supercritical carbon dioxide as a function of temperature and density. An improved equation showed the lowest deviation (2.15%) between experimental data than the other empirical equations considered in this study. The proposed equation was also applied for correlating the solubility of linoleic acid (AARD was 2.40%).     

Optimization of supercritical CO2 extraction of dried Helichrysum italicum flowers by response surface methodology: GC-MS profiles of the extracts and essential oil

Supercritical (SC) CO₂ extraction of dried Immortelle flowers was performed at different process parameters. The optimal extraction conditions related to the yield were determined by response surface methodology (yield 4.09% at 20 MPa and 52°C). The extracts were analyzed by GC-MS and tremetone derivatives dominated: bitalin A, 12-acetoxytremetone, gnaphaliol, 1-[2-(2-methyl-2,3-dihydroxypropyl)-2,3-dihydro-1-benzofuran-5-yl]ethanone, isobutyl bitalin A, and 1-[2-(acetylprop-1-en-2-yl)-3-hydroxy-2,3-dihydro-1-benzofuran-5-yl]ethanone. Striking differences were found among the essential oil and SC-CO₂ extracts composition. The major oil compounds were γ-curcumene, α-pinene, β-selinene, α-selinene, and limonene. Mono- and sesquiterpene were found among minor constituents of the extracts. Neryl acetate was present in the extracts and essential oil.     

Sorption/release of diclofenac sodium in/from free‐standing poly(acrylic acid)/poly(ethyleneimine) multilayer films

Polyelectrolyte multilayer films deposited onto various substrates have been used extensively as drug delivery systems. However, little attention has been paid to the release of drugs from free‐standing polymeric films. Herein, we report the construction of thermal crosslinked free‐standing poly(acrylic acid) (PAA)/branched poly(ethyleneimine) (PEI) multilayer films composed of 25 double layers [(PAA/PEI)₂₅] and their use in sorption/release of diclofenac sodium (DS). The (PAA/PEI)₂₅ multilayer films were characterized by scanning electron microscopy, potentiometric titrations and Fourier transform infrared spectroscopy, while the sorption/release of DS was monitored by UV – Vis spectroscopy. The DS sorption equilibrium data were fitted with five isotherm models (Langmuir, Freundlich, Sips, Dubinin–Radushkevich, and Temkin). The maximum equilibrium sorption capacity, q_m, given by the Langmuir model was 32.42 mg DS/g. The Korsmeyer–Peppas semiempirical equation showed that the release of DS from the free‐standing (PAA/PEI)₂₅ films proceeded by pseudo‐Fickian diffusion, irrespective of the releasing media. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43752.     

Cationic polyelectrolytes,XI. Polymers with quaternary N-atoms in the main chain obtained by condensation polymerization of epichlorohydrin with amines

Water soluble cationic polyelectrolytes containing quaternary nitrogen atoms within the main chain were prepared via condensation polymerization of epichlorohydrin (ECH) with dimethylamine (DMA) and N,N-dialkylaminoalkylamines. The main parameters of the reaction that influence the polymer properties are: DMA/asymmetrical diamine molar ratio, the initial concentration of amine solution, NaOH/amine molar ratio, ECH/amine molar ratio, and asymmetrical diamine structure. The feature of flexible polyelectrolyte own to the investigated polymers was emphasized by the viscosimetric behaviour in dilute aqueous solutions with and without salt presence.     

Adsorption characteristics of UO(2)(2+) and Th(4+) ions from simulated radioactive solutions onto chitosan/clinoptilolite sorbents

Adsorption features of UO(2)(2+) and Th(4+) ions from simulated radioactive solutions onto a novel chitosan/clinoptilolite (CS/CPL) composite as beads have been investigated compared with chitosan cross-linked with epichlorohydrin. The effects of contact time, the initial metal ion concentration, sorbent mass and temperature on the adsorption capacity of the CS-based sorbents were investigated. The adsorption kinetics was well described by the pseudo-second order equation, and the adsorption isotherms were better fitted by the Sips model. The maximum experimental adsorption capacities were 328.32 mg Th(4+)/g composite, and 408.62 mg UO(2)(2+)/g composite. The overall adsorption tendency of CS/CPL composite toward UO(2)(2+) and Th(4+) radiocations in the presence of Cu(2+), Fe(2+) and Al(3+), under competitive conditions, followed the order: Cu(2+)>UO(2)(2+)>Fe(2+)>Al(3+), and Cu(2+)>Th(4+)>Fe(2+)>Al(3+), respectively. The negative values of Gibbs free energy of adsorption indicated the spontaneity of the adsorption of radioactive ions on both the CS/CPL composite and the cross-linked CS. The desorption level of UO(2)(2+) from the composite CS/CPL, by using 0.1M Na(2)CO(3), was around 92%, and that of Th(4+) ions, performed by 0.1M HCl, was around 85%, both values being higher than the desorption level of radiocations from the cross-linked CS, which were 89% and 83%, respectively.     

Nanoparticles from a Gold Complex with Sulfite Ion as Ligand: Preparation and Characterization

Gold colloidal nanoparticles (GNPs) were prepared by reducing a complex of Au⁺. Na₃Au(SO₃)₂ with sodium citrate. The procedure provides control of the dimension of nanoparticles produced, which is a function of reaction time and concentration of reactants. The nanoparticles were separated by centrifugation and their characteristics and dimensions were studied using UV-Vis and IR spectroscopy and transmission electronic microscopy (TEM).     

Benefits of multiple micronutrient supplementation in heart failure: A comprehensive review

Abstract

Background: Multiple micronutrient supplementation has been suggested to have a role on health outcomes in patients with heart failure (HF), but the evidence is inconclusive. Objective: To elucidate the role of multiple micronutrient supplementation in heart failure we performed a comprehensive review of the literature. Methods and results: The search in databases included PUBMED (until June 2018) to detect randomized controlled trials (RCTs) and meta-analyzes that investigated the impact of micronutrient supplementation in HF. Results: With more than 2357 titles and abstracts reviewed, we included only the studies suitable for the final review. Whether alone or in combination, micronutrients have been found to improve the health outcomes of patients with HF by improving symptoms, work capacity and left ventricular ejection fraction (LVEF), thus increasing the quality of life in these patients. Conclusion: Future studies are needed to document the effects of multiple micronutrient associations in order to include them in nutritional guidelines to increase survival and to improve quality of life in patients with heart failure.