Contingency management for smoking cessation in adolescent smokers.

This pilot study evaluated the use of contingency management (CM) procedures in combination with cognitive-behavioral therapy (CBT) for smoking cessation in adolescents. Twenty-eight treatment-seeking adolescent smokers participated in a 1-month, school-based smoking cessation program and were randomly assigned to receive either CM with weekly CBT or CBT alone. In the CM+CBT group, biochemical verification of abstinence was obtained twice daily during the first 2 weeks, followed by daily appointments during the 3rd week and once every other day during the 4th week. Participants were monetarily reinforced for abstinence on an escalating magnitude schedule with a reset contingency. At the end of 1 week and 1 month of treatment, abstinence verified using quantitative urine cotinine levels was higher in participants in the CM+CBT group (1 week: 76.7%; 1 month: 53.0%) when compared with the CBT-alone group (1 week: 7.2%; 4 weeks: 0%). These preliminary results provide a strong initial signal supporting the utility of CM techniques for smoking cessation in adolescents and demonstrate the feasibility of implementing such a program in a school setting. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Voltage-operated calcium channels in male germ cells

The acrosome reaction is a key event in fertilization. Current models for induction of the acrosome reaction incorporate a necessary influx of Ca(2+), which is mediated by agonist-induced gating of ion channels in the sperm plasma membrane. The difficulty of applying electrophysiological techniques to spermatozoa has severely hampered studies on the expression of functional ion channels in these cells. However, during the last few years, a combination of molecular and physiological techniques (applied to immature spermatogenic cells) has elucidated both the expression of Ca(2+) channels in male germ cells and their role in induction of the acrosome reaction. It now appears that a range of voltage-operated Ca(2+) channels, similar to those that occur in somatic cells, is expressed in spermatozoa. Male rodent germ cells express a low-voltage activated (T-type) channel that is regulated by membrane potential and provides the primary Ca(2+) influx mechanism in zona pellucida-stimulated spermatozoa. In human spermatozoa, similar channels are apparently expressed, but their function in induction of the acrosome reaction has yet to be established. A range of other, high voltage-activated channels also appear to be present in rodent and human spermatozoa, but their roles are not yet known. In this review, the structure and characteristics of voltage-operated Ca(2+) channels are outlined and the evidence for their expression and function in male germ cells is assembled and discussed.     

Revisiting the Factor Structure of the Questionnaire on Smoking Urges.

This study assessed the factor structure of the Questionnaire on Smoking Urges (QSU), a commonly used assessment of cravings for cigarettes, with a sample of smokers presenting for treatment in a smoking cessation trial. On the basis of previous research, three confirmatory factor analytic models were tested. Model 1 hypothesized a 26-item, 2-factor model using the items reported in the original QSU analysis by S. T. Tiffany and D. J. Drobes (1991). Model 2 hypothesized a 12-item, 2-factor model comprised of the 6 most robust items found in each of the 2 factors of the original factor analysis. Using the 12 items from Model 2, Model 3 hypothesized a 12-item, 1-factor model. The 2nd model was found to fit the data best. Reliability was also tested using values obtained in this 2nd model, and these estimates were found to be reasonably good. Future research directions for the QSU are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Isothermal crystallization kinetics of polypropylene in melt‐mixed composites of polypropylene and multi‐walled carbon nanotubes

The isothermal crystallization behaviour of the polypropylene (PP) phase in PP/multi‐walled carbon nanotubes (MWCNTs) composites has been investigated via differential scanning calorimetric analysis, which showed the influence of the varying dispersion level of MWCNTs in the respective PP matrix. PP/MWCNTs composites were prepared via melt‐blending technique, wherein two different grades of MWCNTs of varying average “agglomerate” size and varying entanglements (N‐MWCNTs and D‐MWCNTs) were utilized. Furthermore, the influence of melt‐viscosity of the PP phase was investigated on the crystallization kinetics of the PP/MWCNTs composites. Heterogeneous nucleation ability of MWCNTs has resulted in a decrease in half time of crystallization (t _1/2) from ～14 min for pure PP to ～6 min for PP/N‐MWCNTs and ～11 min for PP/D‐MWCNTs composites at 1 wt% of MWCNTs at 132 °C. Overall rate of crystallization (k) has significantly increased to 4.9 × 10^?2 min^?1 for PP/N‐MWCNTs composite as compared with 6.2 × 10^?3 min^?1 for PP/D‐MWCNTs composite at 0.5 wt% of MWCNTs at 132 °C. Moreover, the effect of a novel organic modifier, Li‐salt of 6‐amino hexanoic acid along with a compatibilizer (PP‐g‐MA) has also been investigated on the crystallization kinetics of the PP phase in PP/MWCNTs composites. POLYM. ENG. SCI., 57:1136–1146, 2017. © 2017 Society of Plastics Engineers     

Slow and stunted: Plutonium accounting and the growth of fast breeder reactors in India

The Indian Department of Atomic Energy (DAE) has projected a large growth of nuclear power in the country predominantly based on breeder reactors. These projections use a simplistic methodology that does not carefully account for the availability of plutonium that is required to fuel breeder reactors. In this paper, we demonstrate that this methodology is problematic, in particular that it would result in negative balances of plutonium if the DAE's projections were to come true. The DAE's projections also ignore constraints coming from reprocessing capacity in the country. As an alternative, we project the possible growth of nuclear power based on breeder reactors using a methodology consistent with plutonium constraints. The resulting breeder reactor capacity will be only between 17% and 40% of the DAE's projections, and will likely never constitute a major source of electricity in India for several decades at the very least.     

Particle fracture and plastic deformation in vanadium pentoxide powders induced by high energy vibrational ball-mill

An X-ray powder profile analysis in vanadium pentoxide powder milled in a high energy vibrational ball-mill for different lengths of time (0–250 h), is presented. The strain and size induced broadening of the Bragg reflection for two different crystallographic directions ([001] and [100]) was determined by Warren-Averbach analysis using a pattern-decomposition method assuming a Pseudo-Voigt function. The deformation process caused a decrease in the crystallite size and a saturation of crystallite size of ∼ 10 nm was reached after severe milling. The initial stages of milling indicated a propensity of size-broadening due to fracture of the powder particles caused by repeated ball-to-powder impact whereas with increasing milling time microstrain broadening was predominant. WA analysis indicated significant plastic strain along with spatial confinement of the internal strain fields in the crystallite interfaces. Significant strain anisotropy was noticed in the different crystallographic directions. A near-isotropy in the crystallite size value was noticed for materials milled for 200 h and beyond. The column-length distribution function obtained from the size Fourier coefficients progressively narrowed down with the milling time.     

Multiwalled carbon nanotubes‐based polypropylene composites: Influence of interfacial interaction on the crystallization behavior of polypropylene

Composites of polypropylene (PP) and multi‐walled carbon nanotubes (MWCNTs) were prepared via melt‐mixing utilizing Li‐salt of 6‐amino heaxanoic acid (Li‐AHA) modified MWCNTs in the presence of a compatibilizer (polypropylene‐g‐maleic anhydride; PP‐g‐MA). Improved interaction between the anhydride group of PP‐g‐MA and the amine functionality of Li‐AHA was confirmed via FTIR and Raman spectroscopic analysis. A higher glass transition temperature (T_g) of the PP phase has been observed in these composites as compared to pristine MWCNTs‐based composites. The crystallization temperature (T_c) of the PP phase was increased as a function of pristine MWCNTs concentration in PP/MWCNTs composites indicating hetero‐nucleating action of MWCNTs. However, T_c value was decreased in the presence of Li‐AHA modified MWCNTs indicating the adsorbed Li‐AHA on the MWCNTs surface. Moreover, T_c value was higher in the presence of Li‐AHA modified MWCNTs with PP‐g‐MA as compared to that of without PP‐g‐MA, suggesting the desorbed Li‐AHA from the MWCNTs surface due to melt‐interfacial reaction. Further, MWCNTs were extracted by hot vacuum filtration technique from PP/MWCNTs composites containing Li‐AHA and PP‐g‐MA. The isothermal crystallization kinetics showed a variation in crystallization behavior of the PP phase in the corresponding composites as compared to the “extracted MWCNTs.” POLYM. ENG. SCI., 57:183–196, 2017. © 2016 Society of Plastics Engineers     

Investigation of colour appearance models for illumination changes across media

The key to achieving successful cross‐media colour reproduction is a reliable colour appearance model, which is capable of predicting the colour appearance across a variety of imaging devices under different viewing conditions. The two most commonly used media, CRT displays (soft copy) and printed images (hard copy), were included in this study using four complex images. The original printed images were captured using a digital camera and processed using eight colour appearance models (CIELAB, RLAB, LLAB, ATD, Hunt96, Nayatani97, CIECAM97s, and CAM97s2) and two chromatic adaptation transforms (von Kries and CMCCAT97). Psychophysical experiments were carried out to assess colour model performance in terms of colour fidelity by comparing soft‐copy and hard‐copy images. By employing the memory‐matching method, observers categorized the reproductions displayed on a CRT and compared them to the original printed images viewed in a viewing cabinet. The experiment was divided into three phases according to the different colour temperatures between the CRT and light source, i.e., print (D50, A, and A) and CRT (D93, D93, and D50), respectively). It was found that the CIECAM97s‐type models performed better than the other models. In addition, input parameters for each model had a distinct impact on model performance. © 2001 John Wiley & Sons, Inc. Col Res Appl, 26, 428–435, 2001     

Preliminary examination of tobacco withdrawal in adolescent smokers during smoking cessation treatment

Tobacco withdrawal symptoms have been shown to play a significant role in mediating relapse to smoking in adult smokers; however, few prospective studies have examined the course of tobacco withdrawal symptoms over time and their connection to lapse in adolescent smokers. Withdrawal symptoms were assessed weekly for 4 weeks in a sample of adolescent smokers participating in a pilot cessation intervention. Adolescent smokers experienced an exacerbation in overall withdrawal symptoms, particularly of cravings and restlessness, although symptoms were generally mild. The course of symptoms was different for boys and girls: Girls generally experienced a peak and subsequent decline in symptoms early in the establishment of abstinence, whereas boys experienced a constant level of symptoms that did not decline over the 4 weeks. Finally, withdrawal symptoms experienced on quit day were not related to lapse to smoking during the course of treatment for either boys or girls. These results suggest that although withdrawal symptoms may be uncomfortable, they may not be the most salient to a lapse to smoking for adolescent smokers attempting to quit. These findings have direct implications for the design and implementation of treatment of nicotine dependence in adolescent smokers.     

On the study of phase formation and critical current density in superconducting MgB2

Superconducting bulk MgB₂ samples have been synthesized by employing sintering technique without using any additional process steps, generally undertaken in view of the substantial loss of magnesium, during heat treatment. Starting with Mg rich powders having different atomic ratios of Mg : B, as against the nominally required Mg : B = 1:2 ratio, we have obtained superconducting MgB₂ samples of different characteristics. The effect of excess Mg in the starting mixture and processing temperature on the phase-formation, transition temperature (T _C) and critical current density (J _C) have been investigated by electrical transport and a.c. susceptibility measurements. The X-ray diffraction and X-ray photoelectron spectroscopic analyses of MgB₂ bulk samples have been carried out to understand the role of excess Mg and the effect of processing temperature. It is established that MgB₂ samples with high critical current density can be synthesized from a Mg rich powder having Mg : B in 2:2 ratio, at temperatures around 790°C. Critical current density has been found to vary systematically with processing temperature.