Adsorption and desorption characteristics of 2-methyl-4-chlorophenoxyacetic acid onto activated carbon

Adsorption and desorption characteristics of the 2-methyl-4-chlorophenoxyacetic acid (MCPA) from aqueous solution onto the activated carbon (GAC, F-400) were studied. Adsorption equilibrium capacities of the MCPA increased with decreasing pH and temperature of the solution. Adsorption equilibrium of the MCPA could be represented by the Sips equation. The internal diffusion coefficients were determined by comparing the experimental concentration decay curves with those predicted from surface diffusion model and pore diffusion model. The adsorption model based on the linear driving force approximation (LDFA) was used for simulating the adsorption behavior of the MCPA in a fixed bed. Over ninety five percent desorption of the MCPA could be obtained using distilled water.     

Tracking servo method for holographic data storage using discrete pre-patterns

Page-oriented holographic data storage (HDS) is very sensitive to disturbances that affect the position of the recording medium. Accordingly, a more precise tracking servo is required for the recording process, and is also crucial for achieving high storage density. A compensation method is therefore essential for HDS recording. In this paper, we suggest some discrete pre-patterns for the tracking servo used in the recording process. This method is motivated by a tracking servo technique for a hard disk drive. Firstly, in designing the pattern shape, HDS characteristics are taken into account. Secondly, track error signals are analyzed. Thirdly, the discrete pre-pattern intervals are determined according to the track tolerance. Lastly, the feasibility of the new method is analyzed via simulations and experiments.     

Si/SiGe resonant interband tunnel diode with f/sub r0/ 20.2 GHz and peak current density 218 kA/cm/sup 2/ for K-band mixed-signal applications

This letter presents the room-temperature high-frequency operation of Si/SiGe-based resonant interband tunnel diodes that were fabricated by low-temperature molecular beam epitaxy. The resulting devices show a resistive cutoff frequency f/sub r0/ of 20.2 GHz with a peak current density of 218 kA/cm/sup 2/, a speed index of 35.9 mV/ps, and a peak-to-valley current ratio of 1.47. A specific contact resistivity of 5.3/spl times/10/sup -7/ /spl Omega//spl middot/cm/sup 2/ extracted from RF measurements was achieved by Ni silicidation through a P /spl delta/-doped quantum well by rapid thermal sintering at 430/spl deg/C for 30 s. The resulting devices are very good candidates for RF high-power mixed-signal applications. The device structures presented here are compatible with a standard complementary metal-oxide-semiconductor or heterojunction bipolar transistor process.     

Adsorption of heavy metals by brewery biomass

In this work, biosorption of lead, copper and cadmium by waste brewery yeast has been studied. The adsorption capacity for lead, copper and cadmium on the biomass increased with the increasing temperature and the maximum uptakes were 0.465 mmolPb/g (96.4 mg/g), 0.769 mmolCu/g (48.9 mg/g) and 0.127 mmolCd/g (14.3 mg/g) at 308 K. The Langmuir isotherm, favorable type, and the pseudo second-order kinetic model represent our experimental data very well. The heat of biosorption was evaluated from the Langmuir isotherm equation, and the biosorption of lead, copper and cadmium was endothermic reaction.     

A Video Streaming System for Mobile Phones: Practice and Experience

This paper presents a case of video streaming system for mobile phone which has actually been implemented and deployed for commercial services in CDMA2000 1X cellular phone networks. As the computing environment and the network connection of cellular phones are significantly different from the wired desktop environment, the traditional desktop streaming method is not applicable. Therefore, a new architecture is required to suit the successfully streaming in the mobile phone environment. We have developed a very lightweight video player for use in mobile phone and the related authoring tool for the player. The streaming server has carefully been designed to provide high efficiency, reliability and scalability. Based on a specifically-designed suite of streaming protocol, the server employs an adaptive rate control mechanism which transmits the media packets appropriately into the network according to the change in network bandwidth.Hojung Cha is currently a professor in computer science at Yonsei University, Seoul, Korea. His research interests include multimedia computing system, multimedia communication networks, wireless and mobile communication systems and embedded system software. He received his B.S. and M.S. in computer engineering from Seoul National University, Korea, in 1985 and 1987, respectively. He received his Ph.D. in computer science from the University of Manchester, England, in 1991.Jongmin Lee is a Ph.D. candidiate in computer science at Yonsei University, Seoul, Korea. His research interests include wireless multimedia system, QoS architecture, multimedia communication networks. He received his B.S. and M.S. in computer science from Kwangwoon University in 1999 and 2001, respectively.Jongho Nang is a professor in the Department of Computer Science at Sogang University. He received his B.S. degree from Sogang University, Korea, in 1986 and M.S. and Ph.D. degree from KAIST, in 1988 and in 1992, respectively. His research interests are in the field of multimedia systems, digital video library, and Internet technologies. He is a member of KISS, ACM, and IEEE.Sung-Yong Park is an associate professor in the Department of Computer Science at Sogang University, Seoul, Korea. He received his B.S. degree in computer science from Sogang University, and both the M.S. and Ph.D. degrees in computer science from Syracuse University. From 1987 to 1992, he worked for LG Electronics, Korea, as a research engineer. From 1998 to 1999, he was a research scientist at Telcordia Technologies (formerly Bellcore) where he developed network management software for optical switches. His research interests include high performance distributed computing and systems, operating systems, and multimedia.Jin-Hwan Jeong received the B.S. and M.S. degrees in computer science from Korea University, Seoul, Korea, in 1997, and 1999, respectively. He is currently in Ph.D. course at Korea University. His research interests include video processing for thin devices, multimedia streaming and operating systems.Chuck Yoo received the B.S. degree in electronics engineering from Seoul National University, Seoul, Korea and the M.S. and Ph.D. in computer science in University of Michigan. He worked as a researcher in Sun Microsystems Lab. from 1990 to 1995. He joined the Computer Science and Enginnering Department, Korea University, Seoul, Korea in 1995, where he is currently a professor. His research interests include high performance network, multimedia streaming, and operating systems.Jin-Young Choi received the B.S. degree from Seoul National University, Seoul, Korea, in 1982, the M.S. degree from Drexel University in 1986, and the Ph.D. degree from University of Pennsylvania, in 1993. He is currently a professor of Computer Science and Engineering Department, Korea University, Seoul, Korea. His current research interests are in real-time computing, formal methods, programming languages, process algebras, security, software engineering, and protocol engineering.     

Exposure to ethyl carbamate in alcohol-drinking and nondrinking adults and its reduction by simple charcoal filtration

The risk of exposure to ethyl carbamate from the consumption of kimchi, soy sauce, and alcoholic beverages was assessed in alcohol-drinking and nondrinking adults. An alcohol-drinking adult obtains 5.6–9.2 ng/kg bw/day of ethyl carbamate through the addition of kimchi and soy sauce, while a nondrinking adult receives 3.3–4.0 ng/kg bw/day via kimchi and soy sauce alone. The average excess cancer risk of an alcohol-drinking adult (3.9 × 10^?7) was also twice higher than that of an adult who does not drink (1.9 × 10^?7). We achieved a maximum of 47% and 45% removal of the ethyl carbamate present in diluted spirits and soy sauce, respectively, through a simple charcoal filtration process. This resulted in a reduction of the average daily intakes of ethyl carbamate through diluted spirits and soy sauce from 1.7 and 2.2 ng/kg bw/day to 0.9 and 1.2 ng/kg bw/day, respectively.     

Smart damper using sliding friction of aramid brake lining and self-centering of rubber springs

The purpose of this study is to develop a smart damper with flag-shaped behavior by using the sliding friction of aramid brake lining and the restoring capacity of pre-compressed rubber springs. For this purpose, the friction force of aramid brake lining pressed by bolts was used along with polyurethane rubbers, each with a length of 80 mm, a diameter of 95 mm, and a circular hole of 37 mm. In the experiments, loading frequency and torque force were considered. The loading frequency varied from 0.1 to 2.0 Hz, and frictional force was controlled by variable bolt torque force. The tests were conducted to demonstrate that the clamping force by the bolts could provide normal force to frictional material. The friction force by the aramid brake lining sliding was tested, followed by the pre-compressed rubber springs' behavior. Afterward, a damper combining the two components was tested to verify flag-shaped behavior by using a dynamic actuator, and the damping ratios were evaluated from the hysteretic curves. The behavior of the damper closely matched flag-shaped behavior, resulting in self-centering and energy dissipation capacity.     

Simultaneous removal of cyanide and copper ions in a semi-fluidized ion exchanger bed

Simultaneous removal of cyanide and copper ions from electroplating wastewater was studied in a liquid-solid semi-fluidized ion exchanger bed. The diameter and the height of column are 20 mm and 600 mm, respectively. Strong-base anion exchange resin particles (Dowex 1X8-50) were contacted with synthetic solutions containing copper and cyanide ions. Cyanide and copper ions in the solution were analyzed by a cyanide electrode and ICP (inductively coupled plasma), respectively. The ion exchange equilibrium data of Cu⁺ removed as cyanide-copper complexes on Dowex 1X8-50 at 25 ‡C can be fitted with the Langmuir equation. Early leakage of cyanide from experimental loading profile data results in not only lower selectivity of free cyanide but also different selectivities of CN-Cu complexes due to the size and the structure of complexes. The optimum molar ratio (Q) between cyanide and copper ions is about 3 to obtain a reasonable removal rate of cyanide in this experiment.     

Superhard nanocrystalline titanium nitride films formed by inductively coupled plasma-assisted sputtering

Nano fabrication technology of superhard TiN films with sub-nanometered crystallites was developed using an Inductively coupled plasma (ICP) during deposition. Nanocrystalline TiN coatings were fabricated by ICP assisted sputtering and the properies of the coatings were investigated. The ICP assisted TiN coatings showed a much higher nano-hardness (>43 GPa) compared to coatings produced by the conventional DC sputtering process. The ICP assisited TiN coatings also showed superior properties in dense microstructure and surface roughness compared to the DC sputtered TiN coatings. The superior mechanical properties of ICP assistted TiN coatings were attributed to the fine and dense microstructure and high compressive residual stress.     

Electrically active grain boundaries in ZnO varistors by liquid-infiltration method

The varistors were fabricated by spreading a thin layer of Pr₆O₁₁ powder paste on the surface of ZnO pellets and heating to various temperatures (1200–1400 °C) and times (0–60 min). Higher heat-treatment temperatures and/or times resulted in progressively higher breakdown voltages. Eventually the devices became varistor, which was attributed to the formation of a liquid (ZnO-PrO_x) layer between the grains. Microstructures of cross-sections of wetting pellets have shown that the infiltration rate was increased with the amount of Co₃O₄ and heat-treatment temperature. In addition, on the basis of the small variations of the varistor properties per grain boundary (e.g., threshold voltage, donor concentration, and barrier height), the number of active grain boundaries are believed to be increased when the samples were heat-treated above the liquid-phase temperature.