NMR studies of poly(2-hydroxy ethyl methacrylate-co-2-vinyl pyridine)

Copolymers of 2-hydroxy ethyl methacrylate-2-vinyl pyridine (H/V) of different composition were synthesized by free radical bulk polymerization using azobisisobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The copolymer compositions were calculated from ¹H NMR spectra. The reactivity ratios for H/V copolymers obtained from a linear Kelen-Tudos method (KT) and nonlinear error-in-variables method (EVM) are r_H = 0.50 ± 0.10, r_V = 1.04 ± 0.08 and r_H = 0.55, r_V = 1.06 respectively. The complete spectral assignment of methine, methylene, methyl, carbonyl, and aromatic carbon regions in term of compositional and configurational sequences of H/V copolymers were done with the help of ¹³C{¹H} NMR, distortionless enhancement by polarization transfer (DEPT), two-dimensional heteronuclear single quantum coherence (HSQC) along with total correlated spectroscopy (TOCSY). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A Maximum Likelihood Stereo Algorithm

A stereo algorithm is presented that optimizes a maximum likelihood cost function. The maximum likelihood cost function assumes that corresponding features in the left and right images are normally distributed about a common true value and consists of a weighted squared error term if two features are matched or a (fixed) cost if a feature is determined to be occluded. The stereo algorithm finds the set of correspondences that maximize the cost function subject to ordering and uniqueness constraints. The stereo algorithm is independent of the matching primitives. However, for the experiments described in this paper, matching is performed on the $cf4$individual pixel intensities.$cf3$ Contrary to popular belief, the pixel-based stereo appears to be robust for a variety of images. It also has the advantages of (i) providing adensedisparity map, (ii) requiringnofeature extraction, and (iii)avoidingthe adaptive windowing problem of area-based correlation methods. Because feature extraction and windowing are unnecessary, a very fast implementation is possible. Experimental results reveal that good stereo correspondences can be found using only ordering and uniqueness constraints, i.e., withoutlocalsmoothness constraints. However, it is shown that the original maximum likelihood stereo algorithm exhibits multiple global minima. The dynamic programming algorithm is guaranteed to find one, but not necessarily the same one for each epipolar scanline, causing erroneous correspondences which are visible as small local differences between neighboring scanlines. Traditionally, regularization, which modifies the original cost function, has been applied to the problem of multiple global minima. We developed several variants of the algorithm that avoid classical regularization while imposing several global cohesiveness constraints. We believe this is a novel approach that has the advantage of guaranteeing that solutions minimize the original cost function and preserve discontinuities. The constraints are based on minimizing the total number of horizontal and/or vertical discontinuities along and/or between adjacent epipolar lines, and local smoothing is avoided. Experiments reveal that minimizing the sum of the horizontal and vertical discontinuities provides the most accurate results. A high percentage of correct matches and very little smearing of depth discontinuities are obtained. An alternative to imposing cohesiveness constraints to reduce the correspondence ambiguities is to use more than two cameras. We therefore extend the two camera maximum likelihood toNcameras. TheN-camera stereo algorithm determines the “best” set of correspondences between a given pair of cameras, referred to as the principal cameras. Knowledge of the relative positions of the cameras allows the 3D point hypothesized by an assumed correspondence of two features in the principal pair to be projected onto the image plane of the remainingN− 2 cameras. TheseN− 2 points are then used to verify proposed matches. Not only does the algorithm explicitly model occlusion between features of the principal pair, but the possibility of occlusions in theN− 2 additional views is also modeled. Previous work did not model this occlusion process, the benefits and importance of which are experimentally verified. Like other multiframe stereo algorithms, the computational and memory costs of this approach increase linearly with each additional view. Experimental results are shown for two outdoor scenes. It is clearly demonstrated that the number of correspondence errors is significantly reduced as the number of views/cameras is increased.     

Densities and excess molar volumes of mixtures containing diesel,biodiesel and alkanols at temperatures from 288.15 to 313.15 K

The present work is focusing on the synthesization and physico-chemical properties of Jatropha curcas biodiesel with diesel and alcohols.The densities of binary diesel (2)+1-alkanols (C_3 or C_4)(3) and ternary Jatropha curcas biodiesel (1)+diesel (2)+1-alkanols (C_3or C_4)(3) blends have been reported over full range of composition at temperatures within range 288.15 to 313.15 K.Also densities of Jatropha curcas biodiesel (1)+diesel or 1-alkanols (C_3 or C_4)(2) blends have been measured at 313.15 K.Excess molar volumes,V~E,V~E_(123)of binary and ternary blends were calculated from the measured data and the derived properties were correlated to composition using Redlich–Kister equation.A reasonable agreement was found between the measured and estimated values.Further,densities and excess molar volumes data were reasoned to discuss molecular interactions taking into consideration effect of composition and temperature.     

Metamodeling live sequence charts for code generation

This article presents a metamodeling study for Live Sequence Charts (LSCs) and Message Sequence Charts (MSCs) with an emphasis on code generation. The article discusses specifically the following points: the approach to building a metamodel for MSCs and LSCs, a metamodel extension from MSC to LSC, support for model-based code generation, and finally action model and domain-specific data model integration. The metamodel is formulated in metaGME, the metamodel language for the Generic Modeling Environment.

An Authentication Based Approach for Prevention of Spectrum Sensing Data Falsification Attacks in Cognitive Radio Network

Wireless Personal Communications - This is the era of Intelligent Cognitive Radio Network (CRN) technology that provides the available spectrum with efficient utilization. Cognitive Radio (CR)...     

Model‐based code generation for HLA federates

This paper addresses the problem of automated code generation for a High Level Architecture compliant federate application given its behavior model. The behavior model is a part of the architectural model of a federation that the federate can participate in. The federate behavior model is based on Live Sequence Charts, adopted as the behavioral specification formalism in the Federation Architecture Metamodel (FAMM). FAMM serves as a formal language for describing federation architectures. An objective is to help the testing of federation architecture by means of its prototype implementation early in the development lifecycle. A further objective is to help developers construct complete federate applications that are well modularized. The approach to achieve these objectives is aspect‐oriented in that the generated code, which handles the federate's interactions with a federation execution, serves as the base code, where the computation logic is to be weaved as an aspect. Copyright © 2009 John Wiley & Sons, Ltd.     

Diffusion of fluid confined to nanotube with rectangular cross section

A dynamical model is proposed to study self-diffusion coefficient by confining the fluid in rectangular nanotube. The theoretical model is based on the consideration that the confinement affects the movement at atomic level. The model predicts that the diffusion parallel to walls of channel is different from that of diffusion perpendicular to the walls. Near the walls the dynamics of fluid has been found to slow down to an extent that below a certain value of ratio of width to the diameter of particle, the molecules behave as if these belong to solid. The results are contrasted with the result obtained from the model based on similar considerations for a fluid confined only in one direction. It is found that tendency of freezing near the wall increases due to confinement from second direction. Empirical relation which governs the behavior of diffusion coefficient as function of distance from the confining walls has also been proposed. The effect of confinement is more pronounced for denser fluids than for dilute fluid.     

Tendon layout optimisation through configurational forces equilibration in plane stress analysis of prestressed concrete structures

The focus of this work is a novel application of configurational forces to tendon layout optimisation problems in prestressed concrete beams. To this end, the application of the method of the configurational forces is extended to two-dimensional plane stress analysis. The optimum tendon position is obtained by iteratively arriving at vanishing configurational forces. The performance of the optimisation algorithm is illustrated by means of numerical examples.     

Beta-hairpins with native-like and non-native hydrogen bonding patterns could form during the refolding of staphylococcal nuclease

Refolding of staphylococcal nuclease has been studied recently by hydrogen-deuterium exchange and NMR spectroscopy. These studies infer that beta-hairpin formed by strand 2 and strand 3 connected by reverse turn forms early during the refolding of nuclease. Typically, hydrogen-deuterium exchange NMR techniques are usually carried out on a time scale of milliseconds whereas beta-hairpins are known to fold on a much shorter time scale. It follows that in the experiments, the hydrogen-deuterium exchange protection patterns could be arising from a significant population of fully formed hairpins. In order to demonstrate it is the fully formed hairpins which gives rise to the hydrogen-deuterium exchange protection patterns, we have considered molecular dynamics simulation of the peptide (21)DTVKLMYKGQPMTFR(35) from staphylococcal nuclease corresponding to the beta-hairpin region, using GROMOS96 force field under NVT conditions. Starting from unfolded conformational states, the peptide folds into hairpin conformations with native-like and non-native hydrogen bonding patterns. Subsequent to folding, equilibrium conditions prevail. The computed protection factors and atom depth values, at equilibrium, of the various amide protons agree qualitatively with experimental observations. A collection of molecules following the trajectories observed in the simulations can account for experimental observations. These simulations provide a molecular picture of the formed hairpins and their conformational features during the refolding experiments on nuclease, monitored by hydrogen-deuterium exchange.     

Analysis of temporal jitter in a copper vapor laser system

Temporal jitter in a magnetic pulse compression based copper vapor laser (CVL) system is analyzed by considering ripple present in the input dc power supply and ripple present in the magnetic core resetting power supply. It is shown that the jitter is a function of the ratio of operating voltage to the designed voltage, percentage ripple, and the total propagation delay of the magnetic pulse compression circuit. Experimental results from a CVL system operating at a repetition rate of 9 kHz are presented.