Passive sensitization of human airways induces myogenic contractile responses in vitro

We assessed effects of passive sensitization on human bronchial smooth muscle (BSM) response to mechanical stretching in vitro. Bronchial rings were sham (control) or passively sensitized overnight by using sera from donors demonstrating sensitivity to Dermatophagoides farinae and having immunoglobulin E (IgE) concentrations of 2,600 +/- 200 U/ml. Tissues were fixed isometrically to force transducers to measure responses to electrical field stimulation (EFS) and quick stretch (QS). The myogenic response to QS was normalized to the maximal response to EFS (%EFS). The myogenic response of sensitized BSM was 47.9 +/- 10.9 %EFS to a QS of approximately 6.5% optimal length (Lo); sham-sensitized tissues had a myogenic response of 13.5 +/- 6.4 %EFS (P = 0.012 vs. passively sensitized). A QS of approximately 13% Lo in sensitized BSM caused a response of 82.8 +/- 20.9 %EFS; sham-sensitized tissues developed a response of 38.2 +/- 17.3 %EFS (P = 0.004). BSM incubated with serum from nonallergic donors did not demonstrate increased QS response (4.6 +/- 1.4 %EFS, P = not significant vs. tissue exposed to atopic sera). However, tissues incubated in sera from nonatopic donors supplemented with hapten-specific chimeric IgE (JW8) demonstrated augmented myogenic response to QS of approximately 6.5% Lo (21.9 +/- 6.2 %EFS, P = 0. 027 vs. nonatopic sera alone). We demonstrate that passive sensitization of human BSM preparations causes induction and augmentation of myogenic contractions to QS; this hyperresponsiveness corresponds to the IgE concentration in sensitizing sera.     

Ammoxidation of methylaromatics over vanadium phosphate catalysts II. Catalyst formation, active sites and reaction mechanism

The interactions of VOHPO₄· 0.5H₂O and (VO)₂P₂O₇ with the ammoxidation feed and the single components such as ammonia, oxygen, water and component mixtures were studied in detail using XRD and temperature-programmed reaction spectroscopy. The aim of this work was to improve the knowledge of the formation of the active phases or active sites of the catalysts from their precursors under the condition of the ammoxidation reaction. Similar catalytic properties of various applied VPO materials were discussed in terms of the presence of similar structure elements (domains of adjacent edge-sharing VO₆ octahedra-units and P-O-NH₄ groups).     

Experiences from Exporting Major Proof Assistant Libraries

The interoperability of proof assistants and the integration of their libraries is a highly valued but elusive goal in the field of theorem proving. As a preparatory step, in previous work, we translated the libraries of multiple proof assistants, specifically the ones of Coq, HOL Light, IMPS, Isabelle, Mizar, and PVS into a universal format: OMDoc/MMT. Each translation presented great theoretical, technical, and social challenges, some universal and some system-specific, some solvable and some still open. In this paper, we survey these challenges and compare and evaluate the solutions we chose. We believe similar library translations will be an essential part of any future system interoperability solution, and our experiences will prove valuable to others undertaking such efforts.

     

Microstructure and Microchemistry of Polymer-Derived Crystalline SiC Fibers

Stoichiometric and near-stoichiometric silicon carbide fibers, derived from the polymer polycarbosilane, have been characterized by scanning Auger and transmission electron microscope techniques. Excess carbon usually appeared in the fibers, but it could be eliminated by controlling processing conditions. The fibers consisted mainly of submicrometer-sized SiC microcrystals, with a considerably twinned and stacking-faulted β-SiC structure. Free carbon, which appeared in the form of graphite, was the only detectable intergranular phase in the nonstoichioinetric SiC fibers, while the stoichiometric SiC fibers contained no detectable second phase whatsoever.     

On preconditioning for a parallel solution of the Richards equation

In this paper, we present a class of preconditioning methods for a parallel solution of the three-dimensional Richards equation. The preconditioning methods Jacobi scaling, block-Jacobi, incomplete lower–upper, incomplete Cholesky and algebraic multigrid were applied in combination with a parallel conjugate gradient solver and tested for robustness and convergence using two model scenarios. The first scenario was an infiltration into initially dry, sandy soil discretised in 500,000 nodes. The second scenario comprised spatially distributed soil properties using 275,706 numerical nodes and atmospheric boundary conditions. Computational results showed a high efficiency of the nonlinear parallel solution procedure for both scenarios using up to 64 processors. Using 32 processors for the first scenario reduced the wall clock time to slightly more than 1% of the single processor run. For scenario 2 the use of 64 processors reduces the wall clock time to slightly more than 20% of the 8 processors wall clock time. The difference in the efficiency of the various preconditioning methods is moderate but not negligible. The use of the multigrid preconditioning algorithm is recommended, since on average it performed best for both scenarios.     

面向对象、泛型程序设计与类型约束检查

该文对面向对象和泛型程序设计(generic programming)的核心思想和方法进行了较为深入的分析．阐明了各自的目标、技术特征及其优缺点所在．介绍了泛型程序设计针对对象技术的不足所引进的重大革新，即通过类型需求抽象来设计通用、高效的数据结构和算法；着重论述了作者在进一步增强泛型程序设计实际运用方面所提出的改进工作．以C 语言的一个泛型编程扩充语言C**为实施例，详细说明了如何通过一种叫做“命名类型约束”的新的机制来比较完整地实现静态类型需求的直接语言支持和编译检查，为当前泛型程序设计模型的首例编程语言实例．     

The Effects of Embedded Dipoles in Aromatic Self‐Assembled Monolayers

Using a representative model system, here electronic and structural properties of aromatic self‐assembled monolayers (SAMs) are described that contain an embedded, dipolar group. As polar unit, pyrimidine is used, with its orientation in the molecular backbone and, consequently, the direction of the embedded dipole moment being varied. The electronic and structural properties of these embedded‐dipole SAMs are thoroughly analyzed using a number of complementary characterization techniques combined with quantum‐mechanical modeling. It is shown that such mid‐chain‐substituted monolayers are highly interesting from both fundamental and application viewpoints, as the dipolar groups are found to induce a potential discontinuity inside the monolayer, electrostatically shifting the core‐level energies in the regions above and below the dipoles relative to one another. These SAMs also allow for tuning the substrate work function in a controlled manner independent of the docking chemistry and, most importantly, without modifying the SAM‐ambient interface.     

Filler Wetting in Miscible ESBR/SSBR Blends and Its Effect on Mechanical Properties

The selective wetting behavior of silica in emulsion styrene butadiene rubber (ESBR)/solution styrene butadiene rubber (SSBR) blends is characterized by the wetting concept, which is further developed for filled blends based on miscible rubbers. It is found that not only the chemical rubber–filler affinity but also the topology of the filler surface significantly influences the selective filler wetting in rubber blends. The nanopore structure of the silica surface has been recognized as the main reason for the difference in the wetting behavior of the branched ESBR molecules and linear SSBR molecules. However, the effect of nanopore structure becomes more significant in the presence of silane. It is discussed that the adsorption of silane on silica surface constricts the nanopore to some extent that hinders effectively the space filling of the nanopores by the branched ESBR molecules but not by the linear SSBR molecules. As a result, in silanized ESBR/SSBR blends the dominant wetting of silica surface by the tightly bonded layer of SSBR molecules causes a low‐energy dissipation in the rubber–filler interphase. That imparts the low rolling resistance to the blends similar to that of a silica‐filled SSBR compound, while the ESBR‐rich matrix warrants the good tensile behavior, i.e., good abrasion and wear resistance of the blends.